Purpose

The complication of patellofemoral compartment was quite often in total knee arthroplasty. One of the impotant factors in these complications would be the femoral component rotation in TKA. To determine the rotation of the femoral component, the reference of the surgical epicondylar axis (SEA), posterior condylar axis (PCA), AP axis with three dimensional model achieved from computed tomography data were considered. There are some limitations with pre-oprerative CT-based planning such as radio exposure, cost, time and detection of the depth of cartilage. We evaluate the determination of the femoral component rotation with image-free registration method to compare with three-dimensional template system.

Material and Methods

Thirty six knees were evaluated to determine the femoral component rotation. The reference points were marked to measure the PCA (posterior condylar axis), SEA (surgical transepicondylar axis), and APA (anteroposterior axis, Whiteside line) intra-operatively and calculated the angle from PCA to SEA and PCA to APA with Image free navigation system (BrainLAB). Those knees were preoperatively evaluated the angle deviation from SEA to PCA with three dimensional template system. These angle deviations, which suggested the femoral component rotation obtained from preoperative template system, were statistically compared with the femoral rotation angle in clinical situation.

Introduction

Advanced medical imaging techniques have allowed the understanding of the patterns of relative bone motions at human joints¹. However, poor imaging contrasts of soft tissues have not allowed the full understanding of various glenohumeral ligaments (GHL) functions during glenohumeral joint (GHJ) manoeuvres. This is presently a significant limitation to research as these structures are said to be responsible for the passive stability of the GHJ². Furthermore, the repairs of GHJ instability often take recourse to these structures³. Earlier studies have presented a model that numerically reconstructs or simulates GHJ motions⁴ and how the locus of bony attachment points of the GHLs on a dynamic GHJ could be numerically tagged and trailed⁵. The aim of this study was to advance these previous findings by developing an algorithm that allows the quantification of GHL lengths at any instantaneous position of the GHJ.

Materials and Method

CT scan of a set of humerus and scapula was reconstructed into two individual surface meshes of interconnected nodes, each node having a unique vectorial identification in space. The two attachment nodes (a and b) of a GHL were identified on the bones⁵. Least squares geometric sphere was fitted upon the humeral head (HH) and its centre (c) and radius (r) quantified⁶. Vectors a, b and c were applied to represent the ‘dominant ligament plane’ concomitant with the 2D ‘dominant plane’ of Runciman (1993)⁷. This plane defined the path through which the ligament wrapped on the HH. The point of initial or end of contact of GHL on the HH was defined as the point on HH where a line from c intercepts the ligament at 90°. Total GHL length was calculated as the sum of its three segments, namely: (1) Proximal segment – a straight line from its glenoid attachment node to the point of initial contact (2) Wrap segment – an arc of (r) radius of curvature from initial to end contact points (3) Distal segment – a straight line from end contact point to the humeral node of attachment. The wrap segment was further refined by adjusting ligament contacts along this path to the actual surface contour of the HH by integrating all the surface nodes along the path. The algorithm was tested for short incremental steps of GHJ abduction, flexion, rotation and translations on the Amadi et al's kinematics simulation model⁴.

Materials & Methods

All patients undergoing primary and revision joint replacement surgery at our institution are prospectively entered into a database which includes history and physical examination, radiology, WOMAC and SF-36 scores. These investigations are repeated 3 months, 6 months, 1 year and yearly thereafter at each patient visit.

This database identified all patients undergoing femoral revision arthroplasty over the last 10 years.

Results

There were a total of 231 patients with 248 revision procedures performed. There were 127 female and 104 male patients and the mean age at the time of revision surgery was 69.4 years. Twenty-two of these patients had had at least one prior revision operation on the index hip. Thirty hips were treated with a cemented Echelon stem and 218 treated with a cementless Echelon stem. Of the 248 hips 14 patients were lost to follow-up (14 hips) and 9 patients (9 hips) are deceased. The average follow-up was 5.9 years.

Of the 225 hips remaining in the follow-up series there was a single case of aseptic loosening confirmed radiologically. Twenty-one hips were diagnosed with infection (9.3%); 6 of those patients had had at least one prior revision procedure and 4 additional patients had a prior diagnosis of infection. Therefore, 10 of the 21 hips were either definitely or probably infected at the time of their revision operation on which we are reporting. Nine patients (4%) had multiple dislocations post-operatively. These were patients who had undergone multiple revisions or whose primary revision operation was for instability. An additional 18 patients (8%) had a single dislocation treated by closed reduction requiring no further treatment.

There were 6 hips with intra-operative fracture requiring immediate re-revision plus fracture fixation and a further 12 hips (5.3%) who sustained a peri-prosthetic fracture some time after their revision procedure.

Despite the number of complications the majority of patients required no further surgical treatment. Eleven hips (4.8%) required re-revision of the femoral component. Therefore the overall survival rate at 5.9 years of the Echelon revision stem was 95.2%.

MATERIALS AND METHODS

We performed 50 consecutives TKA in fifty patients affected by knee arthritis utilizing the PFC Sigma System (De Puy, Warsaw, USA) with a new femoral design, having a prolonged anterior flange and a “smoother” throclea. The surgical procedure was performed utilizing the Sigma HP instrumentation to allow 3 degrees of external rotation of the femoral component and the “balanced gaps technique” was chosen. All patellae were replaced. All patients were evaluated preoperatively and at six months follow-up both clinically with the Knee society Score as well as radiografically: standing 30x90 cm. view, Merchant view, standard lateral view and a CT-scan with two millimeters cuts (Berger Protocol) at 20 degrees of flexion were all done. Particular attention was paid to the following CT measurements: patellar tilt, patellar conformity angle, patellar lateralization, femoral component external-rotation in relation to the patellar sitting. Statistical analysis was performed utilizing the t-test e the Wilcoxon test (p<.05).

RESULTS

Any patient was dropped from the study group. Femoral component positioning in relationship to the trans-epicondilar axis showed at follow-up an external rotation of 2.74° (± 2.10°) respect to a preoperative value of 5.7 ° (± 1.80°). Average patellar conformity angle was at follow-up 12.5 (range, -2.5 ° - 28.2 °) respect to an average preoperative value of 10.3° (range, 1.5 – 25.6). Average patellar tilt at follow-up was 2.8°(±7.5°) respect to a preoperative average value of 18.5° (±8.5 °). Average lateralization index was at follow-up 2.7 mm (range, - 3.4 – 7.1 mm) respect to a preoperative value of 12.2 mm (± 4.8 mm).

Background

Revision THA presents significant challenges for the surgeon when the proximal femur is deficient or mechanically unreliable. The aim of this study is to assess the clinical and functional results of the use of tumor enndoprosthesis to reconstruct the proximal femur when there is massive bone loss.

Patients and Methods

A prospective study was conducted involving 10 cases. The follow up of the cases ranged from 12 months to 30 months with a mean period of an average of 23months. The indications for revision surgery were aseptic loosening in 9 cases and septic loosening in one case Harris hip score was used for pre and postoperative clinical evaluation of the patients

Material

The MRI provides a consistent three-dimensional data set of the patient's anatomy which allows for 3D axis identification.

The ideal position and sizing is performed by the surgeon on this 3D model and the patient specific guides are manufactured in advance in order to reproduce the bone cuts corresponding to this positioning and implant size. There are no intramedullary nor extramedullary instruments during the surgery.

Method

We compared 20 patients operated with this technique with 20 patients operated with the conventional technique.

The hypothesis was a difference < 2° between the 2 techniques

The measured parameters were:

HKS, HKA, tibial slope, femoral rotation on CT

Duration, bleeding, pain on VAS and morphine consumption, active flexion, KSS, Oxford score, recovery of independant walking and delay of return to home.

Both groups were identical for gender, age, BMI, etiology, comorbidities, pain and rehabilitation protocols.

Introduction

Hypothermia is the drop in body temperature under 35°C (95°F), It has implications in immunological function and healing process, increasing the infection and the cardiovascular risk. During hip arthroscopy patients are exposed to several risk factors that may lead to hypothermia.

Objective

to determinate if there are hypothermia and which are the factors contributing to hypothermia during hip arthroscopy.

Purpose

Introduce an Integrated Approach for Orthopedic-Sports Medicine Practice and Patient Care Management that

Is built around effective and efficient surgical techniques, and patient care management processes

Integrates Operations and Service Excellence best practices with patient care management processes

Integrates orthopedic care delivery between outpatient clinic, pre-surgery, surgery, inpatient, (acute care) and post acute care settings

Delivers exceptional clinical, patient satisfaction and financial outcomes as validated by independent national healthcare benchmarking organization

Helps position Ortho-Sports medicine services for strategic growth

Is replicable to develop Ortho-Sports Medicine Centers of Excellence

Presentation illustrates the ‘Ten Elements’ approach to implement the Ortho-Sports Medicine Centers of Excellence and demonstrate the effectiveness of the approach with an outcomes study from over 1000 total knee arthroplasty (TKA) procedures. During the presentation, the speakers would share the key clinical, patient satisfaction, and financial outcomes achieved by the implementation of the best practices defined in our ‘Ten Elements’ approach. All performance data elements are collected, validated and analyzed by an independent third party, national healthcare benchmarking company.

During the presentation Dr. Bramlett would elaborate on the surgical protocol, and the key differentiating steps in procedure technique from traditional approach that significantly enhances procedure effectiveness, efficiency and lowers the patient complication rate as demonstrated by benchmarking data. Speakers would further present the key elements of Total Knee Arthoplasty procedure that focus on patient education, patient participation in pre-surgical weight loss and pre-habilitation program, anesthesia approach, avoiding tourniquet use and deep veen thrombosis (DVT) risk reduction, early post operative patient ambulation and weight bearing, and post operative patient management approach. On average the ortho-sports medicine clinical of Alabama TKA patients are disharged from the hospital in 2.6 days, and experience 65 percent less complications than expected for a similar patient population and assume early control of their independent functionality.

Introduction

Our clinic has started to use MAZOR's Spine-Assist(r) robotic device in routine spinal surgery practice since 2006. The use of this system is diverse and now applicable for Vertebroplasty, Biopsy procedures and different techniques of Spinal fusion. During this time our clinic performed near 150 robotic assisted surgeries. Amongst its benefits the system allows the reduction of the duration of fluoroscopic exposure in the OR, better accuracy due to computerized assisted planning and navigation, avoidance of human caused complications and a less traumatic procedure for the patient. On the other hand, the duration of the procedure is prolonged, the wound is subdued to a longer exposure in cases of the open surgery, and the operational cost is higher and requires a good trained medical staff.

Materials and Methods

In the last 2 years we have performed 56 robotic assisted Vertebroplasty procedures (research group). At the same time we have performed 44 non assisted Vertebroplasty procedures. There was a significant difference in the fluoroscopic time and subsequent exposure time to radiation between the groups: in the research group we used only an average of 3 seconds of staff fluoroscopic exposure (an average of 5 fluoroscopic images) compared to an average of 11 seconds of exposure (an average of 24 fluoroscopic images). Furthermore, we have successfully inserted more than 400 pedical screws with less than 1mm accuracy from planning, out which only 8 were misplaced. Subsequently we have also performed 16 biopsies, which were effective as CT based biopsies. The average duration of a surgical procedure without the use of the system in 1 level fusion was 82 min. With the use of the system the average time was 106 min. The operational cost with the use of the system was about 1,000 ∊ more expensive. Furthermore, the use of the system required performing of an additional CT scan with 1 mm slices, which caused an additional exposure to patient radiation.

Background

The increasing desire to protect the periarticular structures led the need of a Tissue Sparing Surgery. The accesses most widely used are the direct-lateral approach and the postero-lateral one, both with patient in lateral decubitus. Aim: This accesses require however an incision of tendons and muscles even in their minimally invasive technique, so we looked for an approach that would wholly protect the periarticular structures and allow us not to revise our experience in patient positioning, preparation of the operating field and surgeon's position during surgery. Our intent was to leave the acquired knowledge unchanged and to preserve unaltered the anatomical landmarks that we had previously identified and consolidated for the correct positioning of the components.

Methods

We have used this approach in more than 180 cases of primary hip arthroplasty. Clinical control includes: Oxford Hip Score, VAS and X-Ray.

Purpose

To evaluate the clinical and radiologic midterm results of rotational acetabular osteotomy (RAO) in incongruent hip joints.

Material and Methods

A consecutive series of 15 hips in 14 patients who underwent RAO in incongruent hip joint were evaluated at an average follow-up of 52.3 months (range from 36 to 101 months). The average age at operation was 27 years (range from 12 to 38 years) old. The preoperative diagnoses were developmental dysplasia in 4 hips, sequelae of Legg-Calvé-Perthes disease in 8 hips, and multiple epiphyseal dysplasia in 3 hips. The RAO procedures were combined with a femoral valgus oseotomy in 10 hips, advance osteotomy of greater trochanter in 4 hips, derotational osteotomy in 2 hips. Clinically, Harris hip score, range of motion, leg length discrepancy(LLD) and hip joint pain were evaluated. Radiological changes of anterior and lateral center-edge(CE) angle, acetabular roof angle, acetabular head index(AHI), ratio of body weight moment arm to abductor moment arm, and a progression of osteoarthritis were analyzed.

Purpose

The ultimate goal in total hip arthroplasty is not only to relieve the pain but also to restore original hip joint biomechanics. The average femoral neck-shaft angle(FNSA) in Korean tend to have more varus pattern. Since most of conventional femoral stems have relatively high, single, fixed neck shaft angle, it's not easy to restore vertical and horizontal offset exactly especially in Korean people. This study demonstrates the advantages of dual offset(especially high-offset) stem for restoring original biomechanics of hip joint during the total hip arthroplasty in Korean.

Materials and Methods

180 hips of 155 patients who underwent total hip arthroplasty using one of the standard(132°) or extended(127°) offset Accolade cementless stems were evaluated retrospectively. Offset of stem was chosen according to the patient's own FNSA in preoperative templating. In a morphometric study, neck-shaft angle of proximal femur, vertical offset and horizontal offset, abductor moment arm were measured on preoperative and postoperative both hip AP radiographs and the differences and correlation of each parameters, between operated hip and original non-operated hip which had no deformity (preoperative ipsilateral or postoperative contralateral hip), were analyzed.

Introduction

Alumina Ceramic liners are increasingly used in patients undergoing Total Hip Replacement (THR). The rate of fracture of ceramic liner is decreasing with improved manufacturing techniques from 1^st to 3^rd generation alumina-ceramic liners. We report the first case of a fracture of a modern, 4^th generation alumina bearing ceramic liner, which incorporates a metal sheath to help avoid fracture. Our case is a 60 years old female presenting two years and three months after a bilateral total hip replacement using Stryker Trident cup, securfit stem and alumina on alumina bearing ceramic liner. Ceramic liners are commonly used, especially in young patients because of their excellent biocompatibility, low wear rate and superior tribology. Although fracture of ceramic liner is a less common complication of modern total hip arthroplasty, it is a major concern with the use of ceramic on ceramic THR, the reason being brittleness of ceramic. Cases of 3^rd generation ceramic liner fracture have been reported which might be associated with impingement due to excessive anteversion of the socket in Asian patients who habitually squat. Habitual squatting, sitting cross legged and kneeling were not characteristic of this case.

Methods

The patient presented with complains of mechanical grinding in left hip. She also reported a past history of clicking sound from left hip on extension of left hip and long stride gait. There was no history of trauma or fall. On examination she had a nonantalgic gait and left hip had audible and palpable crepitations. The range of motion on left hip was intact with no subluxation. Right hip was symptom free and examination did not detect any abnormalities.

Introduction

Modular tapered implants have been suggested as the optimal treatment in patients with severe femoral bone loss undergoing revision total hip arthroplasty (THA). The purpose of this study is to describe minimum 2 year follow up of patients treated with modular tapered prostheses for Paprosky type IIIB and IV femoral bone loss in revision THA.

Methods

44 Consecutive patients with Paprosky type IIIB (23) or IV (21) femurs undergoing revision total hip arthroplasty to cementless modular tapered prostheses were studied. Harris Hip Scores were obtained prior to revision on all patients except those presenting with acute implant failure or periprosthetic fracture. 10 Patients were deceased within 2 years of surgery; the remaining 18 were followed for an average of 42 months (range 25-69 months). Clinical outcomes were measured using the Harris Hip Score, and radiographs were assessed for signs of stem loosening or subsidence >4mm.

Introduction

When using press-fit stems in revision total knee arthroplasty (TKA), diaphyseal engagement optimizes stability. Attempts to maximize press fit may lead to periprosthetic fracture; however, the literature offers no guidance regarding the prevalence or management of this complication. The purpose of this study is to report the incidence, risk factors, and outcomes of these fractures.

Methods

634 Stemmed implants (307 femoral and 327 tibial) from 413 consecutive revision TKAs were reviewed. Immediate and 6 week post-operative radiographs were examined. Patient age, gender, stem length, diameter, and offset were evaluated as potential risk factors for fracture occurrence using a paired t-test for continuous and a chi-square analysis for categorical variables.

Introduction

Serum erythrocyte sedimentation rate (ESR) and C-reactive protein (CRP), and synovial fluid white blood cell (WBC) count and differential are effective in diagnosing periprosthetic joint infection (PPJI); however their utility in patients with inflammatory arthritis is unknown. The purpose of this study is to determine the utility of these tests in patients with inflammatory arthritis.

Methods

934 Consecutive revision hip and knee arthroplasties were prospectively evaluated for PPJI. 202 Cases were excluded due to acute post-operative or hematogenous infection. 690 Patients had non-inflammatory and 42 had inflammatory arthritis. Receiver operating characteristic (ROC) curves were used to establish optimal ESR, CRP, WBC, and % neutrophil values for diagnosis of PPJI, and the area under the curve (AUC) was calculated to determine the overall accuracy.

Introduction

Clinical outcomes of UKA procedures are sensitive to malalignment of the components, and thus show significant variability in the literature. A new robotic procedure addresses isolated medial compartment osteoarthritis with the classic indications of UKA. Using precision planning through patient specific 3D modeling and reconstruction, a robotic arm gives the surgeon control of resurfacing the knee joint, allowing for consistent precision according to the previously chosen plan. Through the precise preparation of bone surfaces and inter-component alignment, this procedure is designed to significantly increase accuracy and decrease mal-alignment, thus increasing post-operative physical and function outcomes. This paper evaluates four year clinical outcomes of this novel surgical procedure.

Methods

The first seventy-three (42 male, 31 female) patients (average age: 71 ±10yrs) to receive a robotically assisted UKA enrolled in an IRB approved outcomes registry. Eleven patients were four years post operative and sixty-two patients were three years post operative at the time of the study. The average follow ups were 45 months and 35 months, respectively (range: 30 to 47 months). The tibial component for all patients was an all-poly inlay design.

Introduction

The purpose of this study was to determine the efficacy of a Multi-modal Blood Conservation protocol that involves pre–operative autologous blood donations (2 units) in conjunction with Erythropoietin supplementation as well as intra-operative conservation modalities.

Methods

A retrospective review of 104 patients with simultaneous bilateral total knee arthroplasty done between 2006-2009 was performed. Patients donated two units of blood, 4 weeks prior to surgery and also received Erythropoetin injections (40 k units 3weeks,2 weeks and 1 week prior to surgery). Intra- operative Blood Management included symptom-based transfusions, blood salvage devices, local epinephrine injections and fibrin spray. Pre-donation blood levels, peri-operative hemoglobin and hematocrit levels along with transfusion records were assessed.

Introduction

The anatomic abnormalities associated with the dysplastic hip increase the complexity of hip arthroplasty, in addition previous femural osteotomy can deformate proximal femur. Despite the fact that uncemented cup and stems are specifically designed for dysplasia to recover the true acetabular region in Crowe IV and sometimes Crowe III additional surgical procedure are required. Purpose of the study is to verify surgical procedures and explore reconstruction options on severe hip dysplasia.

Materials and methods

In last 25 years, 2308 arthroplasties were performed in dysplastic hips (565 cases had a previous femoral osteotomy). In 128 cases was required a correction of femoral side deformity: in 64 cases was performed a greater trochanter osteotomy (in 12 of these a proximal femoral shortening was associated), 55 cases were treated by a shortening subtrochanteric osteotomy (that allows corrections in any plane) and in 9 cases was performed a distal femur osteotomy.

Introduction

Aligning the tibial tray is a critical step in total knee arthroplasty (TKA). Malalignment, (especially in varus) has been associated with failure and revision surgery. While the link between varus malalignment and failure has been attributed to increased medial compartmental loading and generation of shear stress, quantitative biomechanical evidence to directly support this mechanism is incomplete. We therefore constructed and validated a finite element model of knee arthroplasty to test the hypothesis that varus malalignment of the tibial tray would increase the risk of tray subsidence.

Methods

Background

While in vivo kinematics and forces in the knee have been studied extensively, these are typically measured during controlled activities conducted in an artificial laboratory environment and often do not reflect the natural day-to-day activities of typical patients. We have developed a novel algorithm that together with our electronic tibial component provide unsupervised simultaneous dynamic 3-D kinematics and forces in patients.

Methods

An inverse finite element approach was used to compute knee kinematics from in vivo measured knee forces. In vitro pilot testing indicated that the accuracy of the algorithm was acceptable for all degrees of freedom except knee flexion angle. We therefore mounted an electrogoniometer on a knee sleeve to monitor knee flexion while simultaneously recording knee forces. A finite element model was constructed for each subject. The femur was flexed using the measured knee flexion angle and brought into contact with the fixed tibial insert using the three-component contact force vector applied as boundary conditions to the femoral component, which was free to translate in all directions. The relative femorotibial adduction-abduction and axial rotation were varied using an optimization program (iSIGHT, Simulia, Providence, RI) to minimize the difference between the resultant moments output by the model and the experimentally measured moments. Maximum absolute error was less than 1 mm in anteroposterior and mediolateral translation and was 1.2° for axial rotation and varus-valgus angulation. This accuracy is comparable to that reported for fluoroscopically measured kinematics. We miniaturized the external hardware and developed a wearable data acquisition system to monitor knee forces and kinematics outside the laboratory.

INTRODUCTION

Knee contact force during activities after total knee arthroplasty (TKA) is very important, since it directly affects component wear and implant loosening. While several computational models have predicted knee contact force, the reports vary widely based on the type of modeling approach and the assumptions made in the model. The knee is a complex joint, with three compartments of which stability is governed primarily by soft tissues. Multiple muscles control knee motion with antagonistic co-contraction and redundant actions, which adds to the difficulty of accurate dynamic modeling. For accurate clinically relevant predictions a subject-specific approach is necessary to account for inter-patient variability.

METHODS

Data were collected from 3 patients who received custom TKA tibial prostheses instrumented with force transducers and a telemetry system. Knee contact forces were measured during squatting, which was performed up to a knee flexion angle that was possible without discomfort (range, 80–120°). Skin marker-based video motion analysis was used to record knee kinematics. Preoperative CT scans were reconstructed to extract tibiofemoral bone geometry using MIMICS (Materialise, Belgium). Subject-specific musculoskeletal models of dynamic squatting were generated in a commercial software program (LifeMOD, LifeModeler, USA). Contact was modeled between tibiofemoral and patellofemoral articular surfaces and between the quadriceps and trochlear groove to simulate tendon wrapping. Knee ligaments were modeled with nonlinear springs: the attachments of these ligaments were adjusted to subject-specific anatomic landmarks and material properties were assigned from published reports.

Background

One of the main concern about reverse shoulder arthoplasty for the treatment of rotator cuff deficiency is scapular notching that is still an unsolved issue for this particular prosthesis. The purpose of this multicentric retrospective study is to compare two different concept of reverse prosthesis, one with a concentric glenoshere and the other one with a new eccentric glenoshere design that aim to minimize scapular notching.

Methods

From 2004 to 2009 67 patients were treated with a SMR reverse shoulder prosthesis (LIMA) with either concentric (figure 2) or eccentric glenosphere (figure 1). We selected for the study patients with criteria as much homogeneous as possible by the age and pathology. We then included for the study 25 patients (Group 1) with a concentric glenosphere and 21 (Group 2) with a eccentric glenosphere. All baseplates of concentric glenospheres were implanted with the most inferior aspect of baseplate that matched with the inferior glenoid ream, so that the glenosphere extended 4 mm beyond the glenoid inferiorly in order to minimize scapular notching. Every patient were followed clinically (Constant and Murley Score [C.S.] and Simple Shuolder test [S.S.T.]) and radiographically (notching, loosening and mechanical failure) with a minimum follow-up of 24 months. We also evaluated at the final follow-up psna (prosthesis-scapular neck angle), pgrd (peg glenoid rim distance) and DBSNG (distance between scapular neck and glenosfere).

Methods

12 subjects' knees were imaged using fluoroscopy from extension over 90° to maximum kneeling flexion. The images were digitized. The 3-dimensional (3D) position and orientation of the implant components were determined using model-based shape-matching techniques, manual matching, and image-space optimization routines. The implant surface model was projected onto the geometry-corrected image, and its 3D pose was iteratively adjusted to match its silhouette with the silhouette of the subject's TKA components. The results of this shapematching process have standard errors of approximately 0.5° to 1.0° for rotations and 0.5 mm to 1.0 mm for translations in the sagittal plane. Joint kinematics were determined from the 3D pose of each TKA component using the 3-1-2 Cardan angle convention. This process resulted in a distance map of the femoral and tibial surfaces, from which the minimum separations were determined for the purpose of this study between cam and post (fig1.).

Separation distances between the tibial polyethylene (PE) insert's post and the femoral prosthesis component have been calculated in three steps. First, the surface models of all three components as well as their position and orientation were extracted from the data files produced by the fluoroscopic kinematic analysis. Next, a set of 12 points were located on the post of each tibial insert (fig2.). Finally, for each point, the distance to the femoral component was quantified. For each step in this process, custom MATLAB^(r) (The MathWorks(tm) Inc., Natick, MA, USA) programs were used.

For each of the 12 points on the post, a line was constructed through the point and parallel to the outward-facing local surface normal of the post. The resulting set of lines was then intersected with the femoral component model. Intersection points where lines ran “out of” the femoral component, detected by a positive dot product of the femoral component surface normal with the post surface normal (used to define the line), were discarded.

Finally, the distances between the 12 points on the post and the intersection points on each line were calculated. For each line, the smallest distance was retained as a measure of the separation between insert and femoral component. Where a line did not intersect the femoral component, the corresponding separation distance was set to infinity.

In each position, distances are measured at 6 pairs of points. Two indices of asymmetry are analysed:

The absolute difference between both measurements within a pair. Perfect symmetry is present when this absolute difference equals zero.

A linear model for repeated measures is used to analyse the absolute differences as a function of the between-subjects factor condition (mobile bearing or fixed bearing) and the within-subject factors position (4 levels) and pair (6 levels). More specifically, a direct likelihood approach is adopted using a compound symmetric covariance matrix.

Results

There is a significant difference in absolute difference between the fixed and mobile bearing condition (p=0.046). On average, the absolute difference is higher in the fixed bearing condition, 1.75 (95%CI: 1.39;2.11) vs 1.20 (95%CI:0.78;1.62). (fig2.).

Case Report

A patient, female 50 yrs old, diagnosed having a pseudotumor after Resurfacing Arthroplasty for osteo-arthritis of the left hip joint. The revision also failed after 1 y and she developed a pelvic discontinuity. X-ray and Ct scans were taken and sent to a specialized implant manufacturer [Mobelife, Leuven, Belgium]. The novel process of patient-specific implant design comprises three highly automated steps.

In the first step, advanced 3D image processing presented the bony structures and implant components. Analysis showed that anterior column was missing, while the posterior column was degraded and fractured. The acetabular defect was diagnosed being Paprosky 3B. The former acetabular component migrated in posterolateral direction resulting in luxation of the joint. The reconstruction proposal showed the missing bone stock and anatomical joint location.

In the second step, a triflanged custom acetabular metal backing implant was proposed. The bone defect (35ml) is filled with a patient-specific porous structure which is rigidly connected to a solid patient-specific plate. The proposed implant shape is determined taking into account surgical window and surrounding soft tissues. Cup orientation is anatomically analyzed for inclination and anteversion. A cemented liner fixation was preferred (Biomet Advantage 48mm). Screw positions and lengths are pre-operatively planned depending on bone quality, and transferred into surgery using jig guiding technology (Materialise NV, Leuven, Belgium).

In the third step, the implant design was evaluated in a fully patient-specific manner in dedicated engineering (FEA) software. Using the novel automated CT-based methodology, patient-specific bone quality and thickness, as well as individualised muscle attachments and muscle and joint forces were included in the evaluation.

Implants and jig were produced with Additive Manufacturing techniques under ISO 13485 certification, using respectively Selective Laser Melting (SLM) techniques [Kruth 2005] in medical grade Ti6Al4V material, and the Selective Laser Sintering technique using medical grade epoxy monomer. The parts were cleaned ultrasonically, and quality control was performed by optical scanning [Atos2 scanning device, GOM Intl. AG, Wilden, Switzerland]. Sterilization is performed in the hospital.

CONCLUSION

A unique combination of advanced 3D planning, patient-specific designed and evaluated implants and drill guides is presented. This paper illustrates, by means of a clinical case, the novel tools and devices that are able to turn reconstruction of complex acetabular deficiencies into a reliable procedure.

Introduction

Fixation remains a challenge in Revision TKR. Irregular and cavitary bone loss may precludeproper metaphyseal cementation and pressurization. Metaphyseal sleeves have been proposed to improve theinherent rotational stability of the implant bone interface. The goal of this study was to assess the effect of the use of metaphyseal sleeves on the quality of the cement fixation achieved.

Methods

Fifty consecutive revision TKRs for AORI type 2 and 3 bone loss between January 2005 through January 2008 with average 2 years follow up were assessed retrospectively. Twelve patients were excluded for inadequate follow up. Nineteen patients with 26 cemented metaphyseal sleeves (15 tibiae and 11 femora) formed group 1 and 19 patients with 36 revision components (without metaphyseal sleeves) served as control (group 2). Patients were assessed clinically with knee society scores (KSS) and radiographically by quality of metaphyseal cement mantle and radiolucent lines(RLL). Groups were matched for pre-op bone loss and length of follow-up.

Introduction

Mechanical integrity of patella can be weakened by the technique of removing the articulating surface. The senior author developed the technique of maintaining subchondral bone of the lateral patellar facet in early 1980s. Though laboratory studies have demonstrated deleterious effect of excessive resection of patella on the strains in the remaining bone under load; clinical studies have not shown the importance of strong subchondral bone of lateral facet to have an effect on patellar fracture prevalence. We present the results of our patellar resection technique preserving the subchondral bone of lateral facet.

Methods

393 TKRs were performed between 1989 and 1996 using cruciate substituting modular knee with recessed femoral trochlear groove and congruent patello-femoral articulation. 45 patients with 48 knees died and 37 patients with 41 knees were lost to follow-up. Three hundred and four knees were followed for an average 10 years (range 5 -16 years). Patellar surface was resected with an oscillating saw without the use of cutting guide. The medial facet and most of the articular cartilage of the lateral facet was resected, while preserving the subchondral bone of lateral facet. An all-polyethylene implant with single peg was used in most cases.

Purpose

The rate of arthroplasty or osteotomy in patients who had undergone autologous chondrocyte implantation (ACI) for osteochondral defects in the knee was determined. Furthermore, we investigated whether any radiographic evidence of osteoarthritis (OA) prior to ACI was associated with poorer outcome following surgery.

Methods

We retrospectively reviewed the medical notes and radiographs of 236 patients (mean age 34.9) who underwent ACI from 1998 to 2005 at our institution. Knee function was assessed according to the Modified Cincinnati Score (MCS) pre-operatively and at a mean of 64.3 months postoperatively (range 12 – 130). Radiographic changes were graded according to the Stanmore grading system.

INTRODUCTION

Computer-aided systems have been developed recently in order to improve the precision of implantation of a total knee replacement (TKR). Several authors demonstrated that the accuracy of implantation of TKR was higher with the help of a navigation system in comparison to the conventional, manual technique. Theoretically, the clinical results and the survival rates should be improved. Our team was one of the first all over the world which decided to use routinely a navigation system for TKR.

Prostheses designed with a mobile bearing polyethylene component allow an increased congruence between femoral and tibial gliding surface, and should decrease the risk of long-term polyethylene wear. We designed a prosthetic system with one of the highest congruence on the current market. These prostheses might be technically more demanding than more conventional designs, and involve specific complications like bearing luxation. Navigation systems might be helpful in this was as well.

In the present study, we wanted to test clinically the theoretic advantages of these three specific points of our system (navigated implantation, mobile bearing and increased congruence) with a five-year clinical and radiological follow-up.

MATERIAL AND METHODS

128 patients were operated on at our Department with this TKR system between 2000, and were contacted for a five-year clinical and radiological follow-up. The clinical and functional results were evaluated according to the Knee Society Scoring System (KSS). The subjective results were analyzed with the Oxford Knee Score. The accuracy of implantation was assessed on post-operative long leg antero-posterior and lateral X-rays. The survival rate after 5 years was calculated according to the Kaplan-Meier technique.

INTRODUCTION

Computer-aided systems have been developed recently in order to improve the precision of implantation of a total knee replacement (TKR). Several authors demonstrated that the accuracy of implantation of an unicompartmental knee replacement (UKR) was also improved.

Minimal invasive techniques have been developed to decrease the surgical trauma related to the prosthesis implantation. The benefits of minimal-incision surgery might include less surgical dissection, less blood loss and pain, an earlier return to function, a smaller scar, and subsequently lower costs. However, there might be a concern about the potential of minimal invasive techniques for a loss of accuracy. Navigation might help to compensate for these difficulties.

Mobile bearing prostheses have been developed to decrease the risk of polyethylene wear. The benefits might be a better survival and less bone loss during revisions. However, these prosthesis are technically more demanding, and involve the specific risk of bearing luxation. Again, navigation might help to compensate for these difficulties.

MATERIAL AND METHODS

We wanted to combine the theoretical advantages of the three different techniques by developing a navigated, minimal invasive, mobile bearing unicompartmental knee prosthesis. 160 patients have been operated on at our institution with this system. The 81 patients with more than 2 year follow-up have been re-examined. Complications have been recorded. The clinical results have been analyzed according to the Knee Society Scoring System. The subjective results have been analyzed with the Oxford Knee Questionnaire. The accuracy of implantation has been analyzed on post-operative antero-posterior and lateral long leg X-rays. The 2-year survival rate has been calculated.

INTRODUCTION

Revision total knee replacement (TKR) is a challenging procedure, especially because most of the standard bony and ligamentous landmarks used during primary TKR are lost due to the index implantation. However, as for primary TKR, restoration of the joint line, adequate limb axis correction and ligamentous stability are considered critical for the short- and long- term outcome of revision TKR. Navigation system might address this issue.

MATERIAL AND METHODS

We are using an image-free system (ORTHOPILOT TM, AESCULAP, FRG) for routine implantation of primary TKR. The standard software was used for revision TKR. Registration of anatomic and cinematic data was performed with the index implant left in place. The components were then removed. New bone cuts as necessary were performed under the control of the navigation system. The system did not allow navigation for intra-medullary stem extensions and any bone filling which may have been required. This technique was used for 37 patients. The accuracy of implantation was assessed by measuring following angles on the post-operative long-leg radiographs: mechanical femoro-tibial angle, coronal orientation of the femoral component in comparison to the mechanical femoral axis, coronal orientation of the tibial component in comparison to the mechanical tibial axis, sagittal orientation of the tibial component in comparison to the proximal posterior tibial cortex.

Individual analysis was performed as follows: one point was given for each fulfilled item, giving a maximal accuracy note of 4 points. Prosthesis implantation was considered as satisfactory when the accuracy note was 4 (all fulfilled items). The rate of globally satisfactory implanted prostheses and the rate of prostheses implanted within the desired range for each criterion were recorded. The results of the 37 navigated revision TKR were compared to 26 cases of revision TKR performed with conventional intramedullary guiding systems.

Background

High cup abduction angles generate increased contact stresses, higher wear rates and increased revision rates. However, there is no reported study about the influence of cup abduction on stresses under head lateralisation conditions for ceramic-on-Ceramic THA.

Material and method

A finite elements model of a ceramic-on-ceramic THA was developed in order to predict the contact area and the contact pressure, first under an ideal regime and then under lateralised conditions. A 32 mm head diameter with a 30 microns radial clearance was used. The cup was positioned with a 0°anteversion angle and the abduction angle was varied from 45° to 90°. The medial-lateral lateralisation was varied from 0 to 500 microns. A load of 2500 N was applied through the head center.

INTRODUCTION

Squeaking after total hip replacement has been reported in up to 10% of patients. Some authors proposed that sound emissions from squeaking hips result from resonance of one or other or both of the metal parts and not the bearing surfaces. There is no reported in vitro study about the squeaking frequencies under lubricated regime. The goal of the study was to reproduce the squeaking in vitro under lubricated conditions, and to compare the in vitro frequencies to in vivo frequencies determined in a group of squeaking patients. The frequencies may help determining the responsible part of the noise.

METHODS

Four patients, who underwent THR with a Ceramic-on-Ceramic THR (Trident(r), Stryker(r)) presented a squeaking noise. The noise was recorded and analysed with acoustic software (FMaster(r)). In-vitro 3 alumina ceramic (Biolox Forte Ceramtec(r)) 32 mm diameter (Ceramconcept(r)) components were tested using a PROSIM(r) hip friction simulator. The cup was positioned with a 75° abduction angle in order to achieve edge loading conditions. The backing and the cup liner were cut with a diamond saw, in order to avoid neck-head impingement and dislocation in case of high cup abduction angles (Figure1). The head was articulated ± 10° at 1 Hz with a load of 2.5kN for a duration of 300 cycles. The motion was along the edge. Tests were conducted under lubricated conditions with 25% bovine serum without and with the addition of a 3^rd body alumina ceramic particle (200 μm thickness and 2 mm length). Before hand, engineering blue was used in order to analyze the contact area and to determine whether edge loading was achieved.

Background

A high precision of three-dimensional (3D) computerised planning of THA was recently reported. However, there is no comparative study analysing the value of 3D planning comparatively to the planning made on X-rays using 2D templates

Material and method

A prospective comparative randomised study was carried out from 2008 to 2009, and included 2 groups of 32 patients who underwent THA for primary osteoarthritis. One surgeon performed all the procedures using a direct anterior approach. In one group, the planning was made on calibrated X-Rays using 2D templates. In the other group, a 3D planning was performed based on CT-scan using the Hip-Plan software. Post operatively, the final hip anatomy was analysed on X-Rays for the 2D group and on CT-scan for the 3D group.

Introduction

The Oxford Knee Score is a well validated, commonly used scoring system. Previous studies have suggested that the score is influenced by demographic differences between patients in particular the functional component more than the pain and clinical components. The aim of this study was to further assess this using a large number of patients.

Methods

The pre, 3 months and 12 months post-surgical Oxford Knee Scores were collected from 1492 patients from five distinct demographic locations undergoing total knee arthroplasty over twelve years under the care of 8 different consultants. A total of 735 patients had complete data sets. The scores were than analysed to test whether age, postcode, sex or consultant in charge had any significant effects on the outcome.

Objectives

Few reports were shown about the position of the cup in total hip arthroplasty (THA) with CT-based navigation system. We use minimally invasive surgery (MIS) technique when we perform cementless THA and the correct settings of cups are sometimes difficult in MIS. So we use CT-based navigation system for put implants with correct angles and positions. We evaluated the depth of cup which was shown on intra-operative navigation system.

Materials and Methods

We treated 30 hips in 29 patients (1 male and 28 females) by navigated THA. 21 osteoarthritis hips, 6 rheumatoid arthritis hips and 3 idiopathic osteonecrosis hips were performed THA with VectorVision Hip 2.5.1 navigation system (BrainLAB). Implants were AMS HA cups and PerFix stems (Japan Medical Materials, Osaka). Appropriate angles and positions of cups were decided on the 3D model of pelvis before operation. According to the preoperative planning, we put the implants with navigation system. We correct the pelvic inclination angle and measured the depth of cups with 3D template software.

INTRODUCTION

The majority of papers covering MIS total knee describe a surgical approach where the quads tendon is violated. This presentation describes a modified subvastus approach using MIS technique. The results are compared to the regular subvastus approach.

MATERIAL AND METHODS

423 total knee replacements were performed through MIS subvastus approach from November 2002 to February 2004. All cases were performed by the same surgeon. The subvastus approach was modified to allow more quads excursion so the surgery can be performed without dislocating the patella. The data was processed at University of Dundee. The results were compared to the results of 361 cases of standard subvastus approach performed by the same surgeon.

INTRODUCTION

The majority of implants available in the market today were designed to allow for a flexion up to 130 degree angle. The LPS Mobile Flex was designed to accommodate deep flexion, up to 160 degree angle. The purpose of this study is to evaluate the clinical result of the LPS Mobile Flex knee.

MATERIALS AND METHODS

From January 1999 to February 200, 1043 (one thousand and forty three) surgeries were performed on patients treated for advanced osteoarthritis. All the surgeries were carried out by the same surgeon. The majority of the patients had bilateral total knee replacements simultaneously. Mobile and fixed implants were used. Pre-operative ranges of motion were documented on lateral x-ray. Patients were considered to have full flexion if they were able to flex the knee to at least 140 degree and sit on the ground with calf touching thigh for at least one minute. Data were processed at University of Dundee

INTRODUCTION

The majority of implants available in the market today were designed to allow for a flexion up to 130 degree angle. The LPS Mobile Flex was designed to accommodate deep flexion, up to 160 degree angle. The purpose of this study is to evaluate the clinical result of the LPS Mobile Flex knee.

MATERIALS AND METHODS

From January 1999 to Febuary 2002, 318 surgeries were performed on patients treated for advance osteoporosis. All the surgeries were carried out by the same surgeon. The majority of the patients had bilateral total knee replacements simultaneously. Pre-operative ranges of motion were documented on lateral x-ray. Patients were considered to have full flexion if they were able to fix the knee to at least 140 degree angle sit on the ground with calf touching thigh for at least one minute.

Introduction

The number of total knee joint replacements has increased dramatically, from 28,000 in 2004 to over 73,000 in 2008 in the UK. This increase in procedures means that there is a need to assess the performance of an implant design in the general population. For younger, more active patients, cementless tibial fixation is an attractive alternative means of fixation and has been used for over 30 years. However, the clinical results with cementless fixation have been variable, with reports of extensive radiolucent lines, rapid early migration and aseptic loosening [1]. This study investigates the inter-patient variability of bone strain at the implant-bone interface of 130 implanted tibias over a full gait cycle.

Methods

A large scale FE study of a full gait cycle was performed on 130 tibias implanted with a cementless tibia tray (PFC Sigma, DePuy Inc, USA). A population of tibias was generated from a statistical shape and intensity (SSI) model [2].

The tibia tray was automatically positioned and implanted using ZIBAmira (Zuse Institute Berlin, Germany). Cutting and implanting were performed using Boolean operations on the meshed surfaces of the tibia and implant. After generation of a volume mesh from the resulting surface, the bone modulus was mapped onto the new mesh.

The FE models were processed in Abaqus (SIMULIA, RI, USA). Associated force data (axial, anterior-posterior and medial-lateral forces and flexion-extension, varus-valgus and internal-external moments) was sampled from a statistical model of the gait cycle derived from musculoskeletal modelling of 20 elderly healthy subjects. Patient weight was estimated using the length of the tibia and a BMI sampled from NHANES data.

Loads were applied to four groups of nodes on the tibia tray (anterior, posterior, medial and, lateral) for 51 steps in the gait cycle. The bone and implant were assumed to be bonded, simulating the osseointegrated condition.

Introduction

the aim of this study was to analyse the long-term radiological changes following tsa in order to better understand the mechanisms responsible for loosening.

Material and methods

between 1991 and 2003, in 10 European centers, 611 shoulder arthroplasties were performed for primary osteoarthritis using a third generation anatomic prosthesis with a cemented all-polyethylene keeled glenoid component. Full radiographic and clinical follow-up greater than 5 years was available for 518 shoulders. Kaplan-meier survivorship analysis was performed with glenoid revision for loosening and radiological loosening as end points; clinical outcome was assessed with the constant score, patient satisfaction score, subjective shoulder value and range of movement

Introduction

Revision surgery is generally recommended for recurrent dislocation following Total hip arthroplasty (THA). However, dislocation following revision THA continues to remain a problem with further dislocation rates upto 28% quoted in literature.

We present early results of one of the largest series in U.K. using dual mobility cemented acetabular cup for recurrent hip dislocation.

Methods

We retrospectively evaluated 40 patients where revision of hip replacement was performed using cemented dual mobility acetabular prosthesis for recurrent dislocations from March 2006 till August 2009 at our district general hospital by a single surgeon (senior author). The series comprised of 13 men and 27 females with average age of 73.4 years (49-92). The mean follow-up period was 23 months. (36 months –6 months).

All the hips that were revised had 3 or more dislocations, some them more than 10 times. The cause of dislocation was multifactorial in majority of cases including acetabular component malpositioning mainly due to loosening and wear. A cemented dual mobility cup was used in all cases. In six cases the femoral stem was also revised.

Introduction

A 68 year old female patient underwent a left total hip replacement for primary osteoarthritis in March 2004. She was referred back by her GP 5 years as she was struggling with mobility and felt there were mice in her hip. It was squeking so loudly that it could be hear at a distance of 25 metres. There was no history of any falls or dislocation in the last 5 years. The implant used was an Exeter/ABG ceramic total hip prosthesis with Palacos cement. This ladies discomfort in her hip had been always there. She never described herself as being satisfied with the THR. However, her discomfort had worsened terribly over the last year.

On examination

The slightest movement around her hip caused her severe pain. Tremendous squeaking could be heard when she was made to walk. She had significantly limb length discrepancy of 2.5cms. The radiographs revealed that she had probably broken the ceramic head as pieces could be seen around the neck area.

Introduction

The aim of this study is to report the results of Revision hip arthroplasty using large diameter, metal on metal bearing implants- minimum 2 year follow up.

Methods

A single centre retrospective study was performed of 22 consecutive patients who underwent acetabular revision surgery using metal on metal bearing implants between 2004 and 2007. Birmingham hip resurfacing (BHR) cup was used in all patients - monoblock, uncemented, without additional screws in 16 cases and cemented within reinforcement or reconstruction ring in 6 cases.

Femoral revisions were carried out as necessary.

Introduction

To report the short to medium term results of acetabular reconstruction using reinforcement/reconstruction ring, morcellised femoral head allograft and cemented metal on metal cup.

Methods

Single centre retrospective study of 6 consecutive patients who underwent acetabular reconstruction for revision hip surgery.

The acetabulum was reconstructed using morcellised femoral head allograft and reinforcement or reconstruction ring fixed with screws. The Birmingham cup – designed for cementless fixation, was cemented into the ring in all cases. The uncemented Echelon stem with metal on metal modular head was used for reconstructing the femur.

Data from our previous in-vitro study had shown good pull out strength of a cemented Birmingham cup.

Case

The patient was a 64 old woman and complained of chronic mild pain around her left groin region. X-ray examination revealed that osteolysis had been expanding around the screws and extended proximally. The revision surgery was performed for the massive osteolysis through Hardinge antero-lateral approach. The retrieved implants included a cementless cup made of titanium alloy (QPOC cup, Japan Medical Materirals Inc.(JMM) Osaka, Japan), the outer surface of which was plasma-sprayed with titanium for porous formation and coated with AWGC in the deep layer. It was found that the polyethylene liner was destructed partially in the supero-lateral portion, but the cup was well fixed to the bone. The bone-attached area was found to be dispersed over the porous surface of the hemispherical cup. Histological examination revealed that matured bony tissue intruded into the porous surface of the cup, and contacted to bone directly, which was also demonstrated in the back-scattered electron image. It was also demonstrated that there were residual silicon (Si) rich regions on the porous surface by the SEM-EDX analysis, which indicated that constituents of AWGC still remained on the surface. On the other hand, the results of elementary analyses in the Si rich regions varied among the sections, which probably indicated that the extent of degradation and absorption of AWGC varied among the sections.

AWGC was one of the bioactive ceramics and reported to have an ability to bond to bone earlier than hydroxyapatite (HA). In the present case, though massive osteolysis occurred with aggressive wear, it did not expand on the porous surface, and rather progressed along the smooth surface of the screws. Considering that there are many clinical studies reporting poor clinical results of HA-coated smooth cups, bioactive ceramic coating may function well and bring superior clinical results when combined with porous coated substrate. In our study, though the cause of massive polyethylene wear and intrapelvic giant osteolysis could not be revealed, the porous cup with AW-GC bottom coating was well fixed and gained bone-ingrowth at the porous surface under osteolytic conditions, which may demonstrate the long-term durability of this surface treatment.

Introduction

Reoperations to manage unstable total hip arthroplasty are reported with a high failure rate. The dual mobility cup (figure 1) (mobile polyethylene component between the prosthetic head and the outer metal shell) is a useful option in such cases. The purpose of this retrospective study was to assess the clinical and radiologic features associated with the dual mobility cup.

Materials and Methods

Fifty one unstable total hip arthroplasties (32 females, 19 males) were revised using a dual mobility socket at our institution between March 2000 and February 2005.

Mean age at reoperation was 67 year old (range, 35 to 98). The outcome of the revision procedure was assessed using the Harris Hip Score, and complications were determined by detailed review of the patient's records. Anteroposterior and lateral radiographs of the involved joint were reviewed to assess the position of the prosthesis and to look for osteolysis and signs of loosening of the implant.

Introduction

Recurrent instability after total hip arthroplasty remains a serious and somewhat frequent problem. Constrained implants have proven effective to manage instability. This has led to a liberal utilization of these devices. However, sporadic mechanical failures have been reported. This report analyzes the failures of a single constrained device at our institution.

Materials and Methods

Forty-three constrained implants (Stryker Constrained Liner™) in 34 patients were revised out of total 390 similar implants performed at our institution. There were 24 females and 10 males. Constrained implant was inserted at the first revision in 6 hips and after an average of three surgeries (1-6) in 37 hips. Seven different methods of constrained liner fixation were observed. Eight different theoretical failure mechanisms were identified: six are mechanical device failures at each of the implant interfaces, infection and catastrophic polyethylene wear being the other two.

Introduction

Despite improvements in prosthesis design, the clinical outcome of total hip arthroplasty still has 10% failure rate after 10 years. Component malpositioning can lead to instability, impingement, excessive wear and loosening. Computer-assisted procedures are expected to improve the accuracy of component positioning, and therefore the long-term outcome. We present an original hip navigation system that allows controlling leg lengthening, offset and stability without the use of the pelvic anterior plane.

Material and Methods

Because the reliability of the pelvic anterior plane (Lewinnek plane) remains discussed, we present a computer-assisted hip replacement using a functional femoral reference plane. Direction and depth of the acetabular reaming and progression of the femoral rasp are calculated by a sophisticated algorithm, as well as the components' final position, in order to control leg lengthening and offset. In addition, the ROM to impingement (and therefore the stability) is continuously displayed relative to the position of the components. Simple graphical and numerical data in addition to virtual instruments displayed on the screen aid the surgeon during the entire procedure.

Introduction

There is a controversy with regard to the treatment of osteoarthritis (OA) of the knee in patients with considerable deformities of the femoral or tibial shafts. Some surgeons prefer to correct the deformity while performing TKA at the level of the knee joint. However, this technique requires accurate planning and execution of the planned cuts. In addition, the use of intramedullary guides in such cases may not be possible or desirable and may lead to complications. There is a strong indication for using navigation in such cases.

Methods

The navigation technique was used in both laboratory and clinical setting, First, we compared between navigational and conventional techniques in performing TKA in 24 plastic knee specimens (Sawbones, Sweden) that have osteoarthritic changes and complex tibial or femoral deformities. A demo kit for conventional instrumentation of posterior stabilised TKA (Scorpio, Stryker) was used for 12 cases and an image-free navigation system (Stryker) was used for a corresponding 12 cases. There were 4 different deformities; severe mid-shaft tibial varus, severe distal third femoral valgus, complex deformity distal femur and deformity following a revision TKA. The surgical procedures were performed by 3 arthroplasty surgeons, each surgeon operated on 8 knee specimens (4 knees in each arm of the study with 4 different deformities). Deformities were corrected at the level of the knee joint during TKA without prior osteotomies. For conventional techniques, surgeons used a combination of both intramedullary and extramedullary guides. Postoperative long leg radiographs were used to assess coronal alignment. Second, we used the same navigational technique clinically to perform TKA in patients with extra-articular deformities.

Introduction

The purpose of this study was to evaluate the in vivo migration patterns of a polished femoral component cemented line-to-line using EBRA –FCA.

Methods

The series included 164 primary consecutive THAs performed in 155 patients with a mean age of 63.8 years. A single prosthesis was used combining an all-polyethylene socket and a 22.2 mm femoral head. The monoblock double tapered femoral component made of 316-L stainless steel had a highly polished surface (Ra 0.04 micron) and a quadrangular section (Kerboull(r) MKIII, Stryker). The femoral preparation included removal of diaphyseal cancellous bone to obtain primary rotational stability of the stem prior to the line-to-line cementation. Stem subsidence was evaluated using EBRA-FCA software which accuracy is better than ± 1.5 mm (95% percentile), with a specificity of 100% and a sensitivity of 78% for detection of migration of more than 1.0 mm, using RSA as the gold standard.

Introduction

The purpose of this prospective randomized study was to compare the 2-year follow-up penetration of Oxinium versus Metal on polyethylene in a consecutive series of low friction total hip arthroplasty.

Methods

Between July 2006 and May 2006, 50 patients (27 females and 23 males) with a mean age of 60.6 ± 11.4 years (21 to 75) were randomized to receive either Oxinium (25 hips) or Metal (25 hips) femoral head. Other parameters, including the femoral component and the all polyethylene socket (EtO sterilized), were identical in both groups. The primary criterion for evaluation was linear head penetration measurement using the Martell system.

Introduction

Several devices based upon the dual mobility (DM) concept have recently been FDA approved. However, little is available on the efficiency of current DM on THA instability prevention, and on specific complications. The aim of this retrospective study was to report on the minimal 5-year follow-up results of a cementless DM socket.

Methods

Between January 2000 and June 2002, 168 primary consecutive non selected THAs were performed in 92 females and 76 males. The average age at surgery was 67.3 years. A single DM socket design was used (Tregor, Aston Medical, France) consisting of a Ti-sprayed and HA-coated CoCr shell with a highly polished inner surface articulating with a mobile intermediate polyethylene component. The opening diameter of the mobile insert was 6% smaller than that of the femoral head. In 115 hips, the modular femoral head completely covered the Morse taper, whereas a long-neck option leaved the base of the Morse taper uncovered in the remaining 53 hips.

Introduction

Metal Artefact Reduction Sequence (MARS) MRI is being increasingly used to detect soft tissue inflammatory reactions surrounding metal-on-metal hip replacements. The UK MHRA safety alert announced in April 2010 recommended cross-sectional imaging such as MRI for all patients with painful MOM hips. The terms used to describe the findings include bursae, cystic lesions and solid masses. A recently used term, pseudotumour, incorporates all of these lesions. We aimed to correlate the pattern of abnormalities on MRI with clinical symptoms.

Method

Following our experience with over 160 MARS MRI scans of patients with MOM hips we recognized patterns of lesions according to their: wall thickness, T1/T2 signal, shape, and location. We categorised the 79 lesions from 159 MARS MRI scans of into our novel classification scheme of 1, 2a, 2b and 3. There were two groups of patients: well functioning and painful.

Summary

We report the first use of synchrotron xray spectroscopy to characterize and compare the chemical form and distribution of metals found in tissues surrounding patients with metal-on-metal hip replacements that failed with (Ultima hips) or without (current generation, large diameter hips) corrosion.

Introduction

The commonest clinical category of failure of metal-on-metal (MOM) hip replacements is “unexplained” and commonly involved a soft tissue inflammatory response. The mechanism of failure of the Ultima MOM total hip replacement includes severe corrosion of the metal stem and was severe enough to be removed from clinical use. Corrosion is not a feature that we have found in the currently used MOM bearings. To better understand the biological response to MOM wear debris we hypothesized that tissue from failed hips with implant corrosion contained a different type of metal species when compared to those without corrosion.

Purpose

To determine the effect of early recovery with 2 different MIS THA for patients with dysplastic hip because of relatively severe muscle weakness before surgery.

Materials & Methods

MIS THA (248 MIS A/L, 96 2-incision) were performed with single surgeon from 2002. Averaged age was 61 years old. Abductor muscle power and VAS score were analyzed preop, 3, 5 7, 14 days, 2, 6 and 12 months after surgery. Patients were prone position and MicroFET machine (HOGGAN Inc. USA) were used for this analysis. All analysis were performed with single observer (physical therapist).

Introduction

In vitro studies have shown that low clearance metal-on-metal hip joints have the potential of reducing wear during the running-in phase [1]. However, cementless acetabular cup relies on press fitting into the acetabulum, which can generate non-uniform compressive stresses and non-uniform in vivo cup deformation [2, 3]. This could then lead to equatorial contact, resulting in higher wear and friction for a MoM bearing with low clearance. To benefit from low wear generated by low clearance and at the same time to avoid the potential of head seizure and high frictional torque caused by cup deformation, a deflection compensation acetabular cup (DefCom) has been developed based on the Birmingham Hip Resurfacing (BHR) device. The articulating sphere of the DefCom cup provides a low clearance bearing area, whilst the non-articulating sphere maintains the standard BHR clearance. The aim of this study was to evaluate the wear performance of the novel DefCom hip joint using a hip wear simulator.

Materials and Methods

Five pairs of 50 mm DefCom devices were tested in a ProSim hip wear Simulator for 5 million cycles (MC) at a frequency of 1 Hz. The lubricant was new born calf serum with 0.2% sodium azide diluted with de-ionised water to achieve protein concentration of 20 mg/ml. The flexion/extension was 30° and 15° and the internal/external rotation was 10°. The force was Paul-type stance phase loading with a maximum load of 3 kN and a standard ISO swing phase load of 0.3 kN. Five standard 50 mm BHR devices were tested under the same testing conditions for comparison. Statistical analyses were performed at a 95% confidence level (CL) using the statistics function in Excel (Microsoft(r) Excel 2003).

Introduction

All hip replacements depend upon good orientation and positioning to ensure that implants function well in vivo. Mal-orientated devices can lead to poor patient gait, poor range of motion, impingement, edge loading and high wear, which in turn may result in the premature failure of the implants.

Aim

To investigate the correlation between edge loading and wear on retrieved implants through linear wear analysis and radiographic examination of implants in vivo.

Purpose

Many TKA instruments were developed in these days. Distal femoral cutting guide using intra-medullary system were divided into two methods, from anterior or medial. Many companies employed anterior cutting guide, however these guides have a disadvantage of wide skin and quadriceps incision. Only Zimmer provided medial cut guide which performed short skin and quadriceps incision. However, reference point (medial femoral condyle) will be a risk of imprecise cutting for a medial condyle defect cases. We tried L-shaped new distal femoral cutting guide, reference point will be both femoral condyle and cutting from antero-medial side. The purpose of this study was to prove usefulness of the new guide.

Materials and Methods

Twenty-nine knees were employed in this study. All knees were treated with Optetrak knee system (Exactec). Surgical methods were as follows, mid line skin incision, short para-patellar deep incision, no patellar resurfacing, PS type implant and cement fixation were employed. 13 knees were used original anterior cutting guide (O group) and 16 knees were used new antero-medial cut guide (N group). Study items were length of skin incision, length of Quadriceps incision, surgical time, JOA score, and component tilting angles (implant position were compared to femoral axis with AP and lateral view of roentgenograms).

Materials and Methods

Stems from DJO: Revelation Standard, Revelation Short, and Linear stems were inserted into patients' canal geometries. Three-D fill and 3-D fit which were reported ISTA2009 and stress transfer were observed by FEA.

Results

The closest fit and fill were observed Revelation Short and Revelation Standard then Linear. The most proximal load transfer was observed Revelation Short, followed by Revelation Standard then Linear.

Method

After preoperative planning, 2 images were prepared for right eye and left eye giving 2-3 degree's parallax. These images were encoded into a special AVI file for 3-dimensional display. To keep fingers away from the device, several scenes were selected and 3-dimensional slide show was endlessly shown during the surgery.

Result

Cup geometries with screws had been prepared and cup position with screws direction were very useful. The edge of acetabulum and cup edge are well compared then could obtain a better cup alignment. Screws are said to be safe if they were inserted in upper posterior quadrant. However so long as the cluster cup was used, when the cup was given 30 degrees anterior rotation, 25 mm screw was still acceptable using CAT angiography.

Introduction

There is many reports about complications with a resurfacing total hip arthroplasty (RHA). One of the most common complications is the femoral neck fracture. A notch and malalignment were risk factors for this. For an accurate implanting the femoral component in RHA, we performed 3D template and made a patient specific template (PST) using 3D printer and applied this technique for a clinical usage. We report a preliminary early result using this novel technique.

material and method

We performed 10 RHAs in nine patients (7 male, 2 female) from June 2009 to March 2010 due to osteonecrosis in 7 hips and secondary osteoarthritis in 3hips with a mean age of 48 years (40-60). We obtained a volumetric data from pre-operative CT and planned using 3D CAD software. Firstly, size of femoral components were decided from the size planning of cups. We aimed a femoral component angle as ten degrees valgus to the neck axis in AP and parallel in lateral view avoiding a notch. We measured femoral shaft axis and femoral neck axis in AP and lateral view using 3D processing software. PSTs were made using Laser Sintering by 3D printer which had the heat tolerance for sterilization in order to insert the femoral guide wire correctly. We operated in postero-lateral approach for all the patients PST has the base (contact part) fit to poterior inter trochanteric area. It has the arm reached from the base and sleeve hole to insert the guide pin into the femoral head. We measured the femoral component angle in three dimensions using the 3D processing software postoperatively. We compared the difference of this angle and the pre-operative planed angles. We also investigated the operation time, the volume of bleeding during operation and complications.

Introduction

Recent gains in knowledge reveal that the ideal acetabular cup position is in a narrower range than previously appreciated and that position is likely different based on femoral component anteversion. For that reason more accurate acetabular cup positioning techniques will be important for contemporary THA. It is well known that malalignment of the acetabular component in THA may result in dislocation, reduced range of motion or accelerated wear. Up to 8% of THA patients have cups malaligned in version by more than ±10° outside of the Lewinnek safe zone. This type of malalignment may result in dislocation of the femoral head and instability of the joint within the first year, requiring reoperation. Reported incidences of reoperation are 1-9% depending on surgical skills and technique. In addition, cup malalignment is becoming increasingly important as adoption of hard on hard bearings increases as the success of large head hard on hard bearings seems to be more sensitive to cup positioning. This study reports the accuracy of a haptic robotic system to ream the acetabulum and impact an acetabular cup compared to manual instrumentation.

Methods

Six fresh frozen cadaveric acetabula were CT scanned and three-dimensional templating of the center of rotation, anteversion and inclination of the cup was determined pre-operatively. Half of the specimens were prepared with manual instrumentation while half were prepared with robotic guidance. Haptic and visual feedback were provided through robotics and an associated navigation system to guide reaming and impaction of the cup. The robot constrained the orientation and position of the instruments thus constraining the inclination, anteversion and center of rotation of the reamer, trial and the final cup. Post-operative CT's were used to determine the achieved cup placement and compared to the pre-operative plans.

Introduction

Hip resurfacing arthroplasty has gained popularity as an alternative for total hip arthroplasty. Usually, cemented fixation is used for the femoral component. However, each type of resurfacing design has its own recommended cementing technique.

In a recent investigation the effect of various cementing techniques on cement mantle properties was studied. This study showed distinct differences in cement mantle volume, filling index and morphology.

In this study, we investigated the effect of these cement mantle variations on the heat generation during polymerization, and its consequences in terms of thermal bone necrosis.

Materials and methods

Two FEA models of resurfacing reconstructions were created based on CT-data of in vitroimplantations (Fig 1). The two models had distinct differences with respect to the amount of cement that was used for fixation. The first model was based on an implantation with low-viscosity cement, with anchoring holes drilled in the bone, and suction applied to maximize cement penetration. The second model was based on an implantation with medium viscosity cement smeared onto the bone, with no holes and no suction, leading to a thin cement layer.

Thermal analyses were performed of the polymerization process, simulating three different types of bone cement: Simplex P (Stryker), CMW3 (DePuy J&J) and Osteobond (Zimmer), with distinct differences in polymerization characteristics. The polymerization kinematics were based on data reported previously.

During the polymerization simulations the cement and bone temperature were monitored. Based on the local temperature and time of exposure, the occurrence of thermal bone necrosis was predicted. The total volume of necrotic bone was calculated for each case.

Introduction

Proper alignment of the components and soft tissue balance are the two factors that determine the long term outcome of total knee arthroplasty (TKA). On the femoral side a distal cut made perpendicular to the MA will restore the MA of the leg. Different methods are commonly used to resect the femur perpendicular to its MA. In uncomplicated cases, most surgeons routinely use a fixed valgus cut angle (VCA) of 5° or 6°. Various studies have questioned the use of fixed valgus angle resection to restore the mechanical axis. The purpose of this prospective study is to analyze the variability in the valgus angle following computer assisted TKA.

Materials and methods

Twenty-three patients who underwent computer assisted TKA in our institution in 2009 were involved in the study. A total of 40 knees were available for analysis. All the knees underwent a CT scanogram postoperatively. Each scanogram was analyzed using the Amrita medvision(r) software. The angle subtended between the mechanical axis and the distal femoral anatomic axis is the valgus angle. Two independent observers calculated all the values and the interobserver reliability was calculated.

Introduction

Hip implant research has been carried out for decades using hip simulators to reflect situations in vivo. With regards to metal on metal (MoM) implant testing, it has been reported that there is no significant difference between the wear generated by various cobalt chromium (CoCr) microstructures. On the contrary, higher wear, metal ion levels and subsequent failures have been reported in heat treated (high carbon, low carbide) devices compared to as cast (high carbon, high carbide) devices in vivo. During testing, the bearing surfaces may be masked from the effect of microstructure on wear under fast and continuous cycles, while in vivo, the extensive range of kinetics and kinematics, stop/start motion, varying walking frequencies could break down the fluid film, resulting in a less favourable lubrication regime. The aims of this study were to develop a more physiologically relevant hip simulator test protocol, and investigate the effect of microstructure on wear.

Materials & Methods

Three pairs of 50mm as cast (AC) and four pairs of 50mm double heat treated (DHT) CoCr MoM devices were tested in a ProSim hip simulator. In order to determine the frequency for testing, Patients' activities have been monitored using a Step Activity Monitor (SAM) device. The data showed a relatively slower walking pace (frequency) than that used in the hip simulator studies. The new frequency, along with stop/start motion and various kinetics and kinematics profiles have been used in putting together a more physiologically relevant hip simulator test protocol. The lubricant used in this study was new born calf serum with 0.2 % (w/v) sodium azide concentration diluted with de-ionised water to achieve an average protein concentration of 20 g/l. Gravimetric measurements have been taken at 0.5, 1, 1.5 & 2 million cycle (Mc) stages and ion analysis has been carried out on the serum samples.

Introduction

There is no criteria to select cruciate retaining (CR) or posterior substitute (PS) component in total knee arthroplasty (TKA). In this study, extension and flexion gaps were measured intra-operatively with posterior cruciate ligament (PCL) remained to reveal characteristics of the gaps. Component type selection, CR or PS, was decided intra-operatively according to the gaps in each knee.

Materials and methods

One hundred and sixty knees with osteoarthritis were investigated. Extension gap (EG) was made by resection of 8 mm distal femur and 10 mm proximal tibia. After measurement of femoral AP size, about 4 mm bigger 4-in-1 femoral cutting guide than measured size was used for pre-cut of femoral posterior condyle[Figure 1]. With this technique, flexion gap (FG) was made 4 mm smaller than usual measured resection. The gaps were measured by a tension device with 30 pounds tension and FG was corrected by the amount of pre-cut. According to the EG and corrected FG, component type was decided. Too small FG usually needed PCL resection or (and) smaller size of femoral component to make enough final FG. On the other hand, large FG needed careful consideration to sacrifice PCL for adequate final FG. In these cases, CR component was selected usually. If necessary, soft tissue was released for good ligament balance. As the final step of the surgical procedure, the size of femoral component was decided for adequate final FG. It was changeable up to 4 mm larger than measured size[Figure 2].

Background

Mobile-bearing (MB) total knee prostheses have been developed to achieve lower contact stress and higher conformity compared to fixed-bearing total knee prostheses. However, little is known about the in vivo kinematics of MB prostheses especially the motion of the polyethylene insert (PE) during various daily performances. And the in vivo motion of the PE during stairs up and down has not been clarified. The objective of this study is to clarify the in vivo motion of MB total knee arthroplasty including the PE during stairs up and down.

Patients and methods

We investigated the in vivo knee kinematics of 11 knees (10 patients) implanted with PFC-Sigma RP-F (DePuy). Under fluoroscopic surveillance, each patient did stairs up and down motion. And motion between each component was analyzed using two- to three-dimensional registration technique, which used computer-assisted design (CAD) models to reproduce the spatial position of the femoral, tibial components, and PE (implanted with four tantalum beads intra-operatively) from single-view fluoroscopic images. We evaluated the range of motion between the femoral and tibial components during being grounded, axial rotation between the femoral component and PE, the femoral and tibial component, and the PE and tibial component during being grounded.

Background

Currently there are various knee prosthesis designs available each with its plus and minus points; there is no general consensus on whether mobile-bearing knees are functionally better than fixed-bearing ones. This study is designed to compare outcomes after total knee arthroplasty with both of the above prostheses.

Materials & Methods

50 patients (68 knees) who'd had a total knee arthroplasty between April 1999 and April 2008 at both Akhtar and Kian Hospitals for primary osteoarthritis were selected. In 30 cases a fixed-bearing knee (Scorpio(r), Stryker) and in the remaining 38 a mobile-bearing prosthesis (Rotaglide(r), Corin Group) was used. Patients' knees were scored before and after the operation according to the Knee Society Scoring System. The mobile-bearing group had an average age of 65 and 34 months' follow-up; in the fixed-bearing group the average age was 69 and the average follow-up 30 months.

Introduction

Metal on metal hip bearings (MoM) are under scrutiny. Short and mid-term complications attributed to metal wear debris have been reported. Distinctions between MoM prostheses exist. Thus, generalizing findings from one design to another is questionable. This study reports minimum 5 yr. Pinnacle™ modular MoM results.

Methods

Between September 2001 and October 2004, 95 consecutive MoM THAs were performed by one surgeon in a prospective cohort design. Mean age was 53 yrs (range 34-70); 57 were male. Mean BMI was 29 (range 20-46). OA was noted in 87 patients. Head size was 28mm in 3 and 36mm in 92. Surgical approach was postero-lateral in all patients. Harris Hip Score (HHS), WOMAC, ROM and radiographs were evaluated preoperatively, at 6-months, and yearly thereafter.

Introduction

Several options exist for the treatment of periprosthetic osteolysis in revision knee surgery. We describe our preliminary short-term experiences using trabecular metal (TM) technology in order to fill bony defects either on the femoral or on the tibial side.

Material and Methods

52 revision knee surgeries in which this TM technology had been used were retrospectively reviewed clinically and radiographically. Indication for revision included 51 cases with aseptic loosening of Total Knee Arthroplasty. In one case of periprostheti infection, a staged revision procedure was performed. Assessment of bone loss included the AORI classification (1989) and was performed pre- and intraoperatively. Clinical evaluation was performed using the HSS score. In 6 cases in addition to usng the TM cones, an impaction grafting technique was performed.

Introduction

There have been concerns regarding the quality of training received by Orthopaedic trainees. There has been a reduction in working hours according to the European working times directive. National targets to reduce surgical waiting lists has increased the workload of consultants, further reducing the trainees' surgical experience. Navigation assisted procedures are successfully used in orthopaedics and provides useful feedback to the surgeon regarding precision of implant placement. We investigated the use of navigation aids as an alternative source of training surgical trainees.

Methods

We choose a navigation assisted knee replacement (TKR) model for this study. A first year Orthopaedic registrar level trainee was taught the TKR procedure by a scrubbed consultant in 5 cases. He was then trained in use of non-CT based navigation surgery. The Trainee then performed navigation assisted non-complex primary TKR surgery. A consultant Orthopaedic surgeon was available throughout for advice and support. Data collected included pre and post procedure valgus and varus alignment of the knee, total operative time and WOMAC scores pre and post operatively.

Introduction

In recent years, there has been a significant advancement in our understanding of femoro-acetabular impingement and associated labral and chondral pathology. Surgeons worldwide have demonstrated the successful treatment of these lesions via arthroscopic and open techniques. The aim of this study is to validate a simple and reproducible classification system for acetabular chondral lesions.

Methods

In our classification system, the acetabulum is first divided into 6 zones as described by Ilizalithurri VM et al [Arthroscopy 24(5) 534-539]. The cartilage is then graded as 0 to 4 as follows: Grade 0 – normal articular cartilage lesions; Grade 1 softening or wave sign; Grade 2 - cleavage lesion; Grade 3 - delamination and Grade 4 –exposed bone. The site of the lesion is further typed as A, B or C based on whether the lesion is 1/3 distance from acetabular rim to cotyloid fossa, 1/3 to 2/3 distance from acetabular rim to cotyloid fossa and > 2/3 distance from acetabular rim to cotyloid fossa.

For validating the classification system, six surgeons reviewed 14 hip arthroscopy video clips. All surgeons were provided with written explanation of our classification system. Each surgeon then individually graded the cartilage lesion. A single observer then compared results for observer variability using kappa statistics.

Introduction

Infection following total joint arthroplasty is a major and devastating complication. After removal of the initial prosthesis, an antibiotic-impregnated cement spacer is inserted for approx. three months. Treatment is completed by a second stage revision arthroplasty.

Up to now, spacers are produced from conventional bone cements that contain abrasive radio-opaque substances like zirconium dioxide or barium sulphate. As long as spacer wear products (cement particles containing these hard substances) are not fully removed during the final revision surgery they may enter the articulating surfaces of the revision implant leading to third body wear.

In order to reduce the formation of reactive wear particles, a special cement (Copal(r) spacem) without abrasive zirconium dioxide or barium sulphate was developed.

To date, no comparative tribological data for cement spacers have been published. Hence, we carried out a study on the wear properties of Copal(r) spacem (with and without gentamicin) in comparison to conventional bone cements (Palacos(r) R and SmartSet(r) GHV).

Material and Methods

In order to assure reproducible forms of the femoral and tibial components, silicon rubber moulds were produced and filled with the respective cement. Force-controlled simulation was carried out on an AMTI knee simulator (Figure I). The test parameters were in accordance to ISO 14243-1 with a 50% reduced axial force (partial weight bearing). Tests were carried out at 37 °C in closed chambers filled with circulating calf serum. Tests were run for 240,000 cycles (representing the average step rate during 6-8 weeks) at a frequency of 1 Hz. For wear analysis, digital photographs of the spacer were taken at the beginning and at the end of the testing period. The areas of wear scars were measured by the means of a digital image processing software.

Introduction

Osteolysis and aseptic loosening in total hip replacement (THR) is often associated with polyethylene (PE) wear. This caused interest in alternative bearing surfaces. Since the mid nineties, research focused on hard-hard bearings like metal-on-metal (MOM) or ceramic-on-ceramic (COC). However, concerns remain about biological reactions to metallic wear debris or failure of the ceramic components. A new approach to reduce wear with a minimized risk of failure may be the use of a metallic cup in combination with a ceramic head, the so called ceramic-on-metal bearing (COM). The aim of this study was to estimate the wear behaviour at an early stage of this COM bearing type in comparison to COC bearings using a hip simulator.

Material and Methods

Simulator studies were carried out on a single station hip simulator (MTS 858 Mini Bionix II, Eden Prairie, USA) in accordance to ISO 14242-1. Bovine serum was used as the test medium. Four COM and four COC bearings were used, both 36mm in diameter. The heads were made of a mixed-oxid ceramic (Biolox Delta(r)) paired with a high carbon wrought CoCrMo cup in the COM group whereas both components were made of Biolox Delta(r) in the COC group. Simulation was run to a total of 2.4×10⁶ cycles. Wear measurements were performed in intervals of 0.2x10⁶ cycles using a gravimetric method (Sartorius Genius ME235S, measuring solution: 15 μg, Sartorius, Göttingen, Germany).

Introduction

The incorporation of computer navigation in total hip arthroplasty (THA) has been much slower then for total knee arthroplasty (TKA). Computer navigation has proven itself in the realm of TKA but still has yet to advance in THA. The reasons for this include the lack of ease of incorporation, accuracy and precision, and the addition of overall operative time. Another reason for this lack of progress is that a majority of THA's are done with the patient in the lateral position through a posterior or lateral approach making the tracker placement and the registration process somewhat cumbersome. In the direct anterior approach the patient is in the supine position, which accommodates pelvic tracker placement and significantly facilitates the registration process. At our institution we use the direct anterior approach and computer navigation on all of our primary THA's. We hypothesized that computer navigation facilitates cup placement and leg length determination with out significantly increasing our operative time.

Materials and Methods

This was a prospective study comparing a consecutive series of 150 computer navigated total hips to a consecutive series of 150 none navigated total hips. The two groups were similar by age, sex, and BMI. Operative times were collected using our secure online database. The start and stop of operative time was incision to final reduction respectively. Post operative radiographs were analyzed using TraumaCad 2.0 (Voyant Health, Columbia, MD). Cup angle and leg length were measured on A/P pelvic views. Simple descriptive statistics and t-tests were used to analyze data.

Introduction

Total knee arthroplasty is traditionally performed using bone anatomy to dictate femoral implant rotation and soft tissue release to balance any resulting deficiencies. A force sensing device has been developed that reverses this conventional order. It measures the forces in the medial and lateral compartments and dictates the femoral rotation cuts when these are equal. The purpose of this study was to compare the traditional methods of femoral rotation (TEA, AP axis, and posterior referenced) to this novel approach using computer navigation with the force sensor to determine a balanced flexion gap.

Methods

This was a prospective cohort study of 50 consecutive primary TKA's. Inclusion criteria were diagnosis of OA and primary TKA. Exclusion criteria were inability to use force sensing device. The cohort consisted of 29 females and 19 males with an average age of 70.8 years (50.2-90.3) and BMI of 32.0 (19.8 – 56.1). Intra-operative data was collected using computer navigation. Post operative CT scans were obtained on 31 of the 50 knees to assess femoral implant rotation to the patients' true TEA. CT measurements were made by two different observers. Simple descriptive statistics and t-tests were used for analysis.

Introduction

Accurate soft tissue balancing has been recognized as important as alignment of bony cut in total knee arthroplasty (TKA). In addition, using a tensor for TKA that is designed to facilitate soft tissue balance measurements throughout the range of motion with a reduced patello-femoral (PF) joint and femoral component in place, PF joint condition (everted or reduced) has been proved to have a significant effect for intra-operative soft tissue balance. On the other hand, effect of patellar height on intra-operative soft tissue balance has not been well addressed. Therefore, in the present study, we investigated the effect of patellar height by comparing intra-operative soft tissue balance of patella higher subjects (Insall-Salvati index>1) and patella lower subjects (Insall-Salvati indexâ‰/1).

Materials and methods

The subjects were 30 consecutive patients (2 men, 28 women), who underwent primary PS TKA (NexGen LPS-flex PS: Zimmer, Warsaw, IN, USA) between May 2003 and December 2006. All cases were osteoarthritis with varus deformity. Preoperative Insall-Salvati index (ISI) was measured and patients were divided into two groups; the patella higher group (ISIï1/4ž1: 18 knees average ISI was 1.12) and the patella lower group (ISIâ‰/1; 12 knees average ISI was 0.94). Component gap and ligament balance (varus angle) were measured using offset-type tensor with 40lb distraction force after osteotomy with the PF joint reduced and femoral trial in place at 0, 10, 45, 90, 135 degrees of knee flexion. Data of two groups were compared using unpaired t test.

Method

Between 1995 and 1998, 61 RTK prostheses were implanted at our institution consecutively. Of 34 knees with a median duration to end of follow up of 13.0 years (range 11.4 to 14.2 years), the clinical result using Knee Society Score and radiological analysis using Knee Society Roentgenographic Sytstem was evaluated.

Result

The prosthesis had an estimated survival probability of 94.1% at 13 years. There was one case of deep infection and one case of meniscal component failure.

Background

Mobile-bearing (MB) total knee prostheses have been developed to achieve lower contact stress and higher conformity compared to fixed-bearing total knee prostheses. However, little is known about the in vivo kinematics of MB prostheses especially about the kinematics of polyethylene insert (PE). In vivo motion of PE during squatting still remains unclear. The objective of this study is to investigate the in vivo motion of MB total knee arthroplasty including PE during squatting.

Patients and methods

We investigated the in vivo knee kinematics of 11 knees (10 patients) implanted with Vanguard Rotationg Platform High Flex (Biomet^(r)). Under fluoroscopic surveillance, each patient did a wight-bearing deep knee bending motion. Motion between each component was analyzed using two- to three-dimensional registration technique, which uses computer-assisted design (CAD) models to reproduce the spatial position of the femoral, tibial components, and PE (implanted with five tantalum beads intra-operatively) from single-view fluoroscopic images. We evaluated the range of motion between the femoral and tibial components, axial rotation between the femoral component and PE, the femoral and tibial component, and the PE and tibial component, and AP translation of the nearest point between the femoral and tibial component and between the femoral component and PE.

Introduction

While the use of stemmed implants is accepted for patients with medial ligament laxity in primary total knee arthroplasty (TKA), the role of stemmed implants in the setting of isolated lateral laxity is unclear. We present a cohort study to assess the effect of unstemmed, constrained TKA for isolated lateral laxity.

Methods

1745 primary TKA performed by the senior surgeon were reviewed. 39 knees in 33 patients with isolated lateral laxity managed with unstemmed components were compared to matched stemmed controls (37 knees in 28 patients). Lateral instability was defined intra-operatively based on >7mm gap in mid-flexion/full extension/figure-of-four with well-positioned components. Primary outcome measures were clinical failure for aseptic loosening (with need for revision as the endpoint) and any radiographic signs of loosening.

Backgrounds

The authors present an analysis of 30 cases of total hip prosthesis performed with minimally invasive surgical earlier compares with 30 cases of total hip prosthesis performed surgically with direct side. The intent is to demonstrate the immediate and clear advantages especially in the postoperative surgical minimally invasive front.

Methods

The authors present a randomized study of thirty cases of patients undergoing surgery for osteoarthritis of the hip prosthesis with primary surgical minimally invasive front compared to a group of 30 patients undergoing surgery with direct surgical side. All patients had the same cementless implants and instruments with the same surgeon. Patients were then evaluated in four different times: before surgery, immediate postoperative, after 1 week and 4 months after surgery.

Introduction

Wear performances and fracture toughness of the alumina-matrix composite (AMC) Biolox-delta(r) are pointed out in the literature. This study is a prospective monocentric evaluation of 32 and 36 mm AMC/AMC bearing surfaces.

Material and methods

141 THA were included prospectively since 2006 in 127 patients. (62 females, 65 males, mean age 62, 2 years, mean BMI 25, 5). 134 cases were primary implantations. Mean follow-up is 40.9 months (29.8-53.4). In all patients we used the same cementless stem and cup.

Clinical and radiological data were evaluated with a special attention for ceramic fracture and squeaking.

Introduction

The ceramic-on-ceramic strategy in acetabular revision faces potential limitations due to the femoral stem, as the implantation of ceramic ball head on a previously used taper is not recommended. Delta (r) ball heads with titanium sleeves have been proposed to avoid femoral revision. The study reports a minimum 3 years follow-up experience using this strategy.

Materials and Methods

This series report 42 revisions (16 metal-on-metal and 26 PE THA) in 39 patients (mean age 59.2 years, mean BMI 25). The 12-14, 5°46 sleeves were used in 24 cases and 10-12, 6° in 18 cases. (32mm ball head in 26 cases and 36 mm in 16 cases). Titanium serum level has been studied to detect the potential release from the sleeve-taper interface.

Purpose

The purpose of this study was to evaluate the complications related to the prosthesis design in patients managed with cemented total knee arthroplasty (TKA) with the anterior-posterior glide (APG) mobile bearing prosthesis.

Materials and Methods

One hundred eighty three total knee arthroplasties were performed using APG Low Contact Stress mobile bearing prosthesis (Depuy, Warsaw, IN) on 146 patients with an average of 8.4 years follow-up (range, 7 to 10 years). Patients were evaluated clinically and radiologically according to the American Knee Society clinical scoring system. The anteroposterior translation, anterior soft tissue impingements, and complications were assessed at the follow-up periods.

Background

The role of different surgical approaches and types of implant (1-17), surgical technique (9, 10, 21-24), patient's age (6, 8, 31), activity level (5), weight (17) and other demographic factors have been investigated in a lot of studies. The aim of this study is to assess the effect of demographic factors as well as the effect of traditional life-style in patients who had total hip arthroplasty (THA) in our centre within the past 20 years.

Materials and Methods

We reviewed the average Harris Hip Score (HHS) and the prosthesis survival in 210 patients including 235 THAs and 49 revisions between 1985 - 2005. The mean F/U was 6.1 years and average HHS was 78.08±15.7. 26 patients were dead and 17 were inaccessible. The effects of traditional life-style and daily activity level on implant loosening were also considered.

Background

There is paucity of data concerning the morphological dimensions of the distal part of the femur and the proximal part of the tibia in Indian population. The objective of this study was to analyse the exact anatomic data collected from patients undergoing total knee arthroplasty.

Methods

Morphologic data from the distal part of the femur and proximal part of the tibia, from 50 knees, were obtained during total knee Arthroplasty, with a microcalliper. The study included 30 women and 20 men, who had a mean age of 65 years. A characterisation of the aspect ratio (the medial-lateral to anterior-posterior dimensions) was made for the proximal aspect of the tibia and distal part of the femur.

INTRODUCTION

The number of patients undergoing total hip replacement surgery is rising and thus the number of periprosthetic fractures is set to increase. The risk factors for periprosthetic fractures include osteolysis, rheumatoid arthritis, osteoporosis and use of certain types of implants. Evidence from literature suggests that the mortality rate within one year is similar to that following treatment for hip fractures thus as surgeons it is important for us to understand the various management strategies of these fractures.

MANAGEMENT

Acetabular periprosthetic fractures are uncommon and classified into Type I, in which the acetabular component is radiographically stable and Type II, in which the acetabular component is unstable. It is better to prevent than to treat these fractures.

Femoral periprosthetic fractures have several classifications the most commonly used is the Vancouver classification (fig 1).

Type-A fractures are proximal and can involve the greater or lesser trochanter. These are often related to osteolytic wear debris and therefore revision of the bearing surface with bone grafting is recommended. AG involves the greater trochanter and A_L involves the lesser, and these can usually be stabilised by cerclage wires supplemented by screws or plates if required (fig 2).

Management of type B fractures is more controversial and will be discussed in depth with reference to all recent papers at the meeting and data from the Swedish Joint Registry. In summary the management is shown in fig 3.

In type-C fractures, one should ensure the fixation device bypasses the femoral stem by at least 2 diaphyseal diameters. Management is as shown in fig 4.

BACKGROUND

Acetabular defects are encountered in both primary total hip arthroplasty (THA) in patients with developmental dysplasia of the hip (DDH) and in revision THA. The purpose of this study was to evaluate the clinical and radiographic results of one method of acetabular reconstruction for THA using a hydroxyapatite (HA) block with either an autogenous graft or allograft of impacted morsellized bone in conjunction with a cemented socket.

METHODS

Fourteen hips in 14 patients (all female; average age, 64 years) were treated with the above technique in primary (11 DDH) or revision THA (three loosened sockets). All patients were followed clinically in a prospective fashion, and radiographs were analyzed retrospectively. One initial patient had 16-year follow-up, whereas the remaining 13 patients had follow-up between four and 5.5 years.

Patients and Methods

Four knees in 4 patients (all female; average age, 81.5 +/− 2.6 years) with the fracture after TKA were treated with revision TKA. Follow-up period was between six months and 3 years postoperatively

Operative technique

All operations were performed with the patient in the supine position and using a curved anterior (Payer) approach with or without osteotomy of the tuberositas tibiae. The femoral component was removed with detachment from fractured bony fragments. New femoral component with long stem for fixation of the fracture were inserted with bone cement in each case.

INTRODUCTION

Trabecular Titanium™ is an innovative material characterised by an high open porosity and composed by multi-planar regular hexagonal cells. It is not a traditional coating and its tri-dimensional structure has been studied to optimise osteointegration. Furthermore, it has excellent mechanical properties, as a very high tensile and fatigue resistance and an elastic module very similar to the that of the trabecular bone. The aim of this study is to evaluate the osteointegration and bone remodelling measuring the longitudinal pattern of change in BMD around a cementless acetabular cup made from Trabecular Titanium™ (Delta TT cup, Lima Corporate, Italy) in primary total hip arthroplasty (THA).

METHODS

Dual-energy x-ray absorptiometry (DEXA) analysis, radiographic evaluation on standard AP and lateral views and clinical evaluation with Harris Hip Score (HHS) and SF-36 were performed at 1 week, 3, 6, 12 months after surgery.

Introduction

Within the reconstruction of unicondylar femoral bone defects with morselized bone grafts in revision total knee arthroplasty (TKA), a stem extension appears to be critical to obtain adequate mechanical stability. Whether the stability is still secured by this reconstruction technique in bicondylar defects has not been assessed. Long, rigid stem extensions have been advocated to maximize the stability in revision TKAs. The disadvantage of relatively stiff stem extensions is that bone resorption is promoted due to stress shielding. Therefore, we developed a relatively thin intramedullary stem which allowed for axial sliding movements of the articulating part relative to the intramedullary stem. The hypothesis behind the design is that compressive contact forces are directly transmitted to the distal femoral bone, whereas adequate stability is provided by the sliding intramedullary stem. A prototype was made of this new knee revision design and applied to the reconstruction of uncontained bicondylar femoral bone defects.

Materials and Methods

Five synthetic distal femora with a bicondylar defect were reconstructed with impacted bone grafting (IBG) and this new knee revision design. A custom-made screw connection between the stem and the intercondylar box was designed to lock or initiate the sliding mechanism, another screw (dis)connected the stem. A cyclically axial load of 500 N was applied to the prosthetic condyles to assess the stability of the reconstruction. Radiostereometry was used to determine the migrations of the femoral component with a rigidly connected stem, a sliding stem and no stem extension.

Objectives

Many reports were shown about the angle of the cup in total hip arthroplasty (THA) with CT-based navigation system. However, there are few reports about the position of the stem. We investigated the position of the stem in navigated THA. We evaluated the position and alignment of stem which were shown on intra-operative navigation system.

Materials and Methods

We treated 10 hips in 10 patients (1 male and 9 females) by navigated THA. 7 osteoarthritis hips and 3 idiopathic osteonecrosis hips were performed THA with VectorVision Hip 2.5.1 navigation system (BrainLAB). Implants were AMS HA cups and PerFix stems (Japan Medical Materials, Osaka). The positions of stem were decided on the 3D model of femur before operation. According to the preoperative planning, we put the implants with navigation system and recorded the position. We measured the position and alignment of stem with 3D template software after operation. We checked for complications.

INTRODICTION

Since 1985, not resorbable crystalline osteoconductive hydroxyapatite (HA) granules were interposed on the interface between bone and bone cement at the cementation (Interface Bioactive Bone Cement: IBBC) of total hip arthoplasty (THA) to prevent generation of connective tissue and osteolysis for the longevity of cemented THA. To prevent the patients from infection, we are planning to use b-tricalcium phosphate (Beta-TCP) impregnated with antibiotics along with HA granules. However, there have been no reports on the loading and release of antibiotics from fine granules of Beta-TCP. Here, we have investigated the loading of antibiotics on Beta-TCP and their release in vivo.

MATERIALS AND METHODS

Beta-TCP was impregnated with antibiotics such as flomoxef sodium (F), vancomycin hydrochloride (V) cefotiam dihydrochloride (C) and cefozopran hydrochloride (CE) under normal or reduced pressure. After washing with PBS three times, Beta-TCP loaded with the antibiotic was placed in PBS. An aliquot of solution was sampled at appropriate time intervals and the amount of the released antibiotic was estimated based on the anti-bacterial activity.

Results

We found an average difference of 2.2 to 3.6 degrees between the intra-operatively planned and post-operative radiological equivalent measurements.

In conclusion: assuming appropriate planning, robotically assisted surgery in unicondylar knee replacement will result in reliably accurate positioning of component and reduce early component failures caused by malpositioning. Mismatch between preplanning and post-op radiography is caused by poor cementing technique of the prosthesis rather than wrong bony cuts.

Introduction

The most common bearing couple used in total knee arthroplasty (TKA) is ultra-high molecular weight polyethylene (UHMWPE) articulating against a CoCrMo alloy femoral component. Although this couple has demonstrated good clinical results, UHMWPE wear has been identified as one of the principal causes for long-term failure of total knee joint replacements¹ indicating a need for improvements in TKA bearings technology.

The wear resistance of UHMWPE can be improved by radiation crosslinking; however, in order to get the full benefit of this improved wear resistance, an abrasion resistant ceramic counterface is necessary.² Since the radiation crosslinking degrades mechanical properties, it is also important to have an optimized radiation dose and subsequent processing. The purpose of this study was to evaluate the long-term wear performance of VERILAST Technology comprising two advanced bearing technologies, abrasion resistant OXINIUM femoral components (OxZr)^3-4 and wear/strength optimized 7.5 Mrad crosslinked polyethylene (7.5-XLPE).⁵

Materials and Methods

Three component assemblies of LEGION(tm) cruciate retaining (CR) OxZr femoral components, 7.5-XLPE tibial inserts were tested on an AMTI knee simulator under displacement control at 1 Hz frequency as described previously.² The tibial inserts were manufactured from compression molded GUR 1020 UHMWPE, radiation crosslinked to 7.5 Mrad dose, remelted to extinguish free radicals, and sterilized by EtO. The wear test was conducted for 45 Mcycle, which was considered to be a conservative estimate for the amount of cycles that would occur during 30 years of typical in-vivo use based on the relationship between patient age and the number of loading cycles as reported in the literature.^6-8

Introduction

Large diameter femoral heads offer increased range of motion and reduced risk of dislocation. However, their use in total hip arthroplasty has historically been limited by their correlation with increased polyethylene wear. The improved wear resistance of highly crosslinked UHWMPE has led a number of clinicians to transition from implanting traditionally popular sizes (28mm and 32 mm) to implanting 36 mm heads. Desire to further increase stability and range of motion has spurred interest in even larger sizes (> 36 mm). While the long-term clinical ramifications are unknown, in-vivo measurements of highly crosslinked UHMWPE liners indicate increases in head diameter are associated with increased volumetric wear [1]. The goal of this study was to determine if this increase in wear could be negated by using femoral heads with a ceramic surface, such as oxidized Zr-2.5Nb (OxZr), rather than CoCrMo (CoCr). Specifically, wear of 10 Mrad crosslinked UHMWPE (XLPE) against 36 mm CoCr and 44 mm OxZr heads was compared.

Materials and Methods

Ram-extruded GUR 1050 UHMWPE was crosslinked by gamma irradiation to 10 Mrad, remelted, and machined into acetabular liners. Liners were sterilized using vaporized hydrogen peroxide and tested against either 36 mm CoCr or 44 mm OxZr (OXINIUM(tm)) heads (n=3). All implants were manufactured by Smith & Nephew (Memphis, TN).

Testing was conducted on a hip simulator (AMTI, Watertown, MA) as previously described [2]. The 4000N peak load (4 time body weight for a 102 kg/225 lb patient) and 1.15 Hz frequency used are based upon data obtained from an instrumented implant during fast walking/jogging and have previously been shown to generate measurable XLPE wear [2,3]. Lubricant was a serum (Alpha Calf Fraction, HyClone Laboratories, Logan, UT) solution that was replaced once per week [2]. Liners were weighed at least once every million cycles (Mcycle) over the duration of testing (∼ 5 Mcycle). Loaded soak controls were used to correct for fluid absorption. Single factor ANOVA was used to compare groups (a = 0.05).

Background

Performing total knee replacement needs both bony & soft tissue consideration. Late John Insall advocating spacer blocks with concept of balanced & equal flexion – extension Gap. Although we usually excise both ACL & PCL, still it is possible to retain more soft tissue. Both PCL retaining & sacrificing Require intact collaterals for stability. Superficial MCL & LCL should be preserved, if possible. after PCL removal the following advantages could obtain: More correction of fixed varus or valgus deformity, More surgical exposure. but there are no proved disadvantages like; increasing in stress & loosening of bone-cement-prosthesis interface, specific clinical difference in ROM, forward lean during stepping up, proprioception inferiority. in other hand Over tight PCL cause excessive rollback of tibia & knee hinges open, preventing flexion (booking), and Severe posteromedial poly wear in poor balance PCL might be happened.

Mid range laxity when Post. Capsule is tight, even with correct tensioning in full extension & 90 degree flexion, may occur (and secondary collateral ligaments imbalance throughout ROM). There is a major effect of capsular contracture in coronal mal alignment with flexion contracture. Full MCL releases not only correct fixed varus but also open the medial space in flexion. MCL & post. Capsule has combined valgus resistant effect in extension. PCL release increase flexion gap more, May be necessary to release something that affect extension gap as compensated balancing (Post.medial capsule). Any flexion contracture need to posterior capsulotomy & post. Condyle osteophyte removal before femoral recut.

So it is possible to perform posteromedial capsulotomy prior to superficial MCL release.

Method

From May to Dec. 2009, 22 patients (23 knees) with primary DJD and varus deformity of knees were operated by myself with joint replacement. most patients had some degree of varus correction in flexion, passively. the varus angle was less than 25∗, means mild to severe but not decompensated. For soft tissue balancing during Total knee arthroplasty I consider the following steps;

Medial capsule & deep MCL release, PCL release, Posteromedial capsulotomy, semimembranous release, Superficial MCL release, Pes anserinous release. Post. medial capsulotomy was done in all cases.

The Average Age was 64.74 years, 19 patients were female (83%) and one of them had bilateral TKA simultaneously. Lt Knee was operated in 14 cases (70% of 24). Spinal anesthesia was applied in 82%. 10 patients were operated with MIS technique and 13 patients with Standard medial parapatellar incision. Semi membranous release was necessary in 4 cases (preop varus 17,20,24,25∗). MCL release was mandatory in 2 cases (preop varus 17, 24 ∗ & No Flexibility in 30∗ flexion).for checking balanced medial and lateral subtle laxity (playing), I have used simple blade with 1 & 2 mm thickness in each ends for younger patients, and the other one with 3&4 mm thickness in elder cases.

Background

There are many difficulties during performing total hip replacement in high riding DDH. These difficulties include:

In Acetabular part: bony defect in antero lateral acetabular wall/finding true centre of rotation/shallowness of true acetabulum/hypertrophied and thick capsular obstacle between true and false acetabulum

The purpose of this lecture is how to manage above problems with using reinforcement ring (ARR) for reconstruction of true acetabulum and step cut L fashion proximal femoral neck shortening osteotomy in a single stage operation

Method

23 surgeries in 19 patients, including 18 female and one male were performed by me from Jan. 1997 till Dec. 2009. Six patients had bilateral hip dislocation, but till now only four of them had bilateral stepped operation. Left hip was involved in 15 cases (65.2%). The average age was 40 years old. All hips were high riding DDH according to both hartofillokides and crowe classification. Reconstruction of true acetabulum was performed with aid of reinforcement ring and bone graft from femoral head in all cases. Trochantric osteotomy was done in all, followed by fixation with wire in 22 cases which needed two revisions due to symptomatic non union (9%). Hooked plate was use in one case for trochantric fixation. Due to high riding femur, it was necessary to performed femoral shortening in neck area as a step cut L fashion.

In two patient, one with bilateral involvement, after excessive limb lengthening following trial reduction, it was necessary to performed concomitant supracondylar femoral shortening. (3 cases = 13%)

22 mm cup & miniature muller DDH stem were used in 18 cases (78.26%). In 5 cases, one bilaterally, non cemented stem and 28 mm cemented cup in ring were used.

Primary adductor tenotomy was performed in 9 cases. Secondary adductor tenotomy needed in 2 cases (totally = 47.82%). Repair of iatrogenic femoral artery tear after traction injury with retractor, occurred in 2 cases (8.69%).

All patients evaluate retrospectively. Average follow up month is 68.7.

Material and methods

From juli 2005 to march 2009 a total of 113 (70 males,53 female) uncemented Nanos-short-stem prothesis were implanted in 111 patients. The patiens average age was 53 years (33-73). The indication for this procedure was predominantly coxarthrosis. In all cases a minimal invasive posterior approach was used. The mean follow up period was 2,5 years (range 6 months- 4,5 years). The patients were assessed using Harris Hip Score and radiologically to detect any bone changes, the stand of the prothesis and peri-articular ossifications

Results

The perioperative Harris Hip Score was 53 (28-77), postoperative was 94 (86-100). Untill now we have not discovered any prothesis specific complications. Radiological follow up examinations showed the development of increasing trabecular reinforciment of the femoral neck and pertrachanteric regions. There is no evidence of any loosing or migration of the prothesis. No luxation. Calcification was noted in 8 cases (Grad 1), 4 cases(Grad 2), 1 case (Grad 3). In 3 cases we have to change the cup because of malposition

Background

Bouchard -arthrose is often familial and affect predominantly females. It starts as acute inflammation of the soft tissue and with time may progress to severe deformity and limitation of movement. In the early phases one of the most commen operation in the management is the synovialectomy. In late stages with severe destruction and deformity of the joint arthrodesis can be carried out. However, arthrodesis may lead to severe loss of function. One of the most commonly and world wide used prothesis to maintain movement is the Swanson –spacer.

Material and Methods

20 Swanson-implants in 14 patients (12 female,2 male) were evaluated subjectively and objectively using PIJA-score (Interphalangeal-joint –score) and Dash –score. The follow period was 4.6 years (range 1-11 years).

Background

The trapeziometacorpal joint (TMJ) of the thumb is a common site of primary osteoarthritis. Pain, crepitis and instability secondary to subluxation are common symptoms associated with TMJ arthritis. Conservative therapy help to control symptoms however with time, many patients progress with pain, deformity and functional limitation. The goals of operative intervention are to restore stability and strength, decrease pain and to provide a functional range of motion. Francobal-prosthesis may fulfil these criterions.

Technique

We implanted the prosthesis through a dorso-radial straight longitudinal or slightly curved skin incision. A dorsal capsulotomy is performed and at this step adduction deformity should be addressed. An osteotomy of the proximal surface of the first metacarpal is made perpendicular to the long axis of the medullary cavity followed by reaming of the medullary cavity and then a trial fit. This is followed by preparation of the trapezium including removing any osteophytes, drilling of a cavity. Dental burs may be used at this step to deepen the cavity. The process of cementation started by cementation of the cup with its opening neutral to the joint surface, and if there is any muscle tension, bone is removed from the metacarpal before the metacarpal component is cemented. Reduction is achieved by snapping. The capsule and wound are closed and the thumb is immobilised in an adduction splint for ten days.

Introduction

The use of less invasive techniques for total hip arthroplasty (THA) has remained controversial with some studies showing a higher incidence of complications. The technique of performing total hip arthroplasty through a superior capsulotomy was developed to maximally preserve the soft tissue envelope surrounding the hip. The current study assesses the recovery and complications of hips replaced using conventional and tissue preserving techniques.

Methods

206 hips in 191 patients with a mean follow-up of 4.3 ± 1.0 (range, 3.2 – 5.9) years underwent total hip arthroplasty using the superior capsulotomy technique. The mean age at operation was 55.7 ± 12.9 (19 – 85) years and the operation was performed for 106 hips (51%) in men. The surgical technique involves exposing the superior hip joint capsule posterior to the medius and minimus, and anterior to the short external rotators. The femur is prepared with the femoral head in place and then the femoral head is excised without dislocation. These 206 hips were compared to a cohort of 279 hips replaced using the transgluteal exposure (control group). These 2 series were controlled for complexity and demographic factors. Recovery was evaluated using the Merle d'Aubigné score at 6 and 12 weeks postoperatively.

Introduction

The initial mechanical stability of cementless femoral stems in total hip arthroplasty is an important factor for stable biological fixation. Conversely, insufficient initial stability can lead to stem subsidence, and excessive subsidence can result in periprosthetic femoral fracture due to hoop stress. The surface roughness of stems with a surface coating theoretically contributes to initial mechanical stability by increasing friction against the bone, however, no reports have shown the effect of surface roughness on stability. The purpose of this study was to evaluate the effect of differences in surface roughness due to different surface treatments with the same stem design on the initial stability.

Materials and Methods

Proximally titanium plasma-sprayed femoral stems (PS stem) and proximally grit-blasted stems (GB stem) were compared. The stem design was identical with an anatomic short tapered shape for proximal fixation. The optimum size of PS stem based on 3D templating was implanted in one side of 11 pairs of human cadaveric femora and the same size of GB stems was implanted in the other side. After implantation, the specimens were fixed to the jig of a universal testing machine in 25cm of entire length so that the long axis of the femur was positioned at 15-degrees adduction to the vertical. Vertical load tests were conducted under 1 mm/minute of displacement-controlled conditions. After 200 N of preload to eliminate the variance in the magnitude of press-fit by manual implantation, load was applied until periprosthetic fracture occurred.

Introduction

Current standard cups of metal on metal resurfacing hip arthroplasty (RHA) have no dome holes and it is very difficult for surgeons to confirm full seating of these cups. This sometimes results in gap formation between the cup and acetabular floor. Although the incidence of initial gaps using modular press-fit cups with dome screw holes has been reported to range from 20 to 35%, few studies have reported the incidence of gap formation with monoblock metal cups and its clinical consequences in RHA. The purpose of this study was to investigate retrospectively the incidence of initial gap formation and whether the initial gap influences the clinical results in RHA.

Material and Method

RHA was performed on 166 hips of 146 patients using the Birmingham Hip Resurfacing (BHR) (MMT, UK) between 1998 and 2007. Mean age at operation was 48.7 years (range, 19-85 years). Mean duration of follow-up was 6.9 years (2.0-10.6). Acetabular reaming was performed with the use of hemispherical reamers and the reamer size was increased up to an odd number diameter which provided tight rim fit in the antero-posterior direction. The same size hemispherical provisional cup with dome holes and slits was used to check the cavity for complete seating. If the provisional cup could not be seated on the floor, reaming was repeated with the same reamer to remove the rim bump until full seating was achieved. Acetabular cups of 1mm larger diameter were impacted into the acetabulum by a press-fit technique. After press-fit fixation, the stability of the cups was confirmed with a synchronized movement of the pelvis and the cup inserter by applying a gentle torque. Clinical evaluation was performed using WOMAC at the latest follow-up. Radiographic assessments were performed using radiographs immediately after the surgery, at 3 weeks, 3 months, 1 year, and then annually thereafter. We evaluated the height of the gap between the cup and acetabular surface, cup inclination angle, cup migration and the time to gap filling. To investigate the relationship between the magnitude of the gap and the radiographic results, the patients were divided into two groups according to the height of the initial gap; the cases with a gap of less than 3 mm on the initial radiograph were grouped into a small gap group, the cases with a gap of 3mm or more were grouped into a large gap group. We compared the changes in the height of the gap, in the cup inclination angle and the cup migration between the groups.

Introduction

Resistant organisms are difficult to eradicate in infected total knee arthroplasty, and treatment of methicillin-resistant Staphylococcus aureus (MRSA) is especially challenging. Whereas most surgeons use antibiotic-impregnated cement during revision to treat infection, the delivery of the drug in adequate doses is limited in penetration and duration. This study presents the 2- to 8-year prospective results of one-stage revision and intraarticular antibiotic infusion protocol used to treat MRSA.

Methods

Eighteen knees (18 patients) with methicillin-resistant Staphylococcus aureus were treated between January 2001 and January 2007 with one-stage revision protocol that included débridement, uncemented revision of total knee components, and intraarticular infusion of 500 mg vancomycin via Hickman catheter once or twice daily for 6 weeks. (Figure 1) No intravenous antibiotics were used after the first 24 hours. Serum vancomycin levels were monitored to maintain levels between 3 and 10 μg/mL. The mean serum vancomycin peak concentration was 6 ± 2 μg/mL and the mean serum vancomycin trough concentration was 3 ± 1 μg/mL at 2 weeks postoperative.

Introduction

Recent clinical studies found no apparent reduction in wear using yttria-stabilized zirconia (Y-TZP) instead of cobalt chromium alloy femoral heads bearing against cross-linked UHMWPE. The purpose of this study was to compare the surface topography of retrieved Y-TZP and magnesia-stabilized zirconia (Mg-PSZ) femoral heads and evaluate the influence of time in vivo. The increase in average roughness (Ra, Sa) of Y-TZP due to phase transformation in vivo is well documented, while Mg-PSZ does not roughen or undergo phase transformation in vivo. However, the effects of phase transformation on the polarity (skewness, Ssk) of the surface of retrieved ZrO₂ heads has not been reported. We hypothesized that phase transformation associated with the increased roughness of Y-TZP would influence skewness and thus the wear potential of the heads.

Materials and Methods

Y-TZP (n = 18) and Mg-PSZ (n = 17) femoral heads were retrieved from revision THA. Heads were cleaned and scanned by optical profilometry (magnification = 10x) at three locations per specimen. After subtracting the curvature of the heads, roughness statistics (Sa, Ssk) were calculated and averaged for each specimen and then correlated to age in vivo, with p < 0.05 for significance.

Purpose

To review prospectively collected data on patients undergoing primary total hip arthroplasty utilizing two different cementless acetabular components.

Materials & Methods

All patients undergoing primary total hip replacement surgery at our institution are entered prospectively into a database which includes history and physical examination, radiology, WOMAC and SF-36 scores. The patients are re-examined, re-x-rayed and re-scored at 3 months, 6 months and 1 year after surgery and yearly thereafter.

Using this database we are able to identify patients who have undergone total hip replacement using one of two geometric variants of the acetabular component. The first design is hemispherical and the second design has a peripheral rim expansion designed to increase initial press-fit stability.

Aim

This prospective randomised controlled trial aims to compare the clinical and radiological outcomes of ceramic on ceramic, cobalt chrome on ultra-high molecular weight polyethylene, and cobalt chrome on highly cross-linked polyethylene bearing surfaces at a minimum of five years.

Methods

One hundred and two primary total hip replacements were performed in ninety one patients between February 2003 and March 2005. All patients were younger than 65 (mean 52.7, 19-64). They were randomised to receive one of the three bearing surfaces. All patients had 28mm articulations with a Reflection uncemented acetabular component and a Synergy stem (Smith & Nephew, Memphis, Tennessee). Patients were followed up periodically up to at least sixty months following surgery. Outcome measures included WOMAC and SF12 scores. Radiological assessment included implant position, evidence of osteolysis and measurement of linear wear.

Introduction

Femoro-acetabular impingement (FAI) is a common source of impaired motion of the hip, often attributed to the presence of an aspherical femoral head. However, other types of femoral deformity, including posterior slip, retroversion, and neck enlargement, can also limit hip motion. This study was performed to establish whether the “cam” impinging femur has a single deformity of the head/neck junction or multiple abnormalities.

Materials and Methods