Aims

Thresholds of acceptable early migration of the components in total knee arthroplasty (TKA) have traditionally ignored the effects of patient and implant factors that may influence migration. The aim of this study was to determine which of these factors are associated with overall longitudinal migration of well-fixed tibial components following TKA.

Aims

In countries with social healthcare systems, such as Canada, patients may experience long wait times and a decline in their health status prior to their operation. The aim of this study is to explore the association between long preoperative wait times (WT) and acute hospital length of stay (LoS) for primary arthroplasty of the knee and hip.

Currently 180 days is the target maximum wait time set by all Canadian provinces for elective joint replacement surgery. In Nova Scotia however, only 34% of Total Knee Arthroplasties (TKA) and 51% of Total Hip Arthroplasties (THA) met this benchmark in 2017. Surgery performed later in the natural history of disease is shown to have significant impact on pain, function and Health related Quality of Life at the time of surgery and potentially affect post-operative outcomes. The aim of this study is to describe the association between wait time and acute hospital Length of Stay (LOS) during elective hip and knee arthroplasty in province of Nova Scotia. Secondarily we aim to describe risk factors associated with variations in LOS.

Data from Patient Access Registry Nova Scotia (PAR-NS) was linked to the hospital Discharge Access Database (DAD) for primary hip and knee arthroplasty spanning 2009 to 2017. There were 23,727 DAD observations and 21,329 PARNS observations identified. Observations were excluded based on missing variables, missing linkages, revision status and emergency cases. Percentage difference in LOS, risk factors and outcomes were analyzed using Poisson regression for those waiting more than 180 days compared to those waiting equal or less than 180 days.

For primary TKA, 11,833 observations were identified with mean age of 66 years, mean wait time of 348 days and mean LOS of 3.6 days. After adjusting for controls, patients waiting more than 180 days for elective TKA have a 2.5% longer acute care LOS (p < 0.028). Risk factors identified for prolonged LOS are advanced age, female gender, higher surgical priority indicator, required blood transfusion, dementia, peptic ulcer disease, cerebrovascular disease, heart failure, chronic kidney disease, malignancy, ischemic heart disease and diabetes. Factors associated with decreased LOS are surgical year, use of local anesthetic, peripheral location of hospital and admission to hospital from home.

For primary THA, 6626 observations were identified with mean age of 66 years, mean wait time of 267 days and mean LOS of 4 days. Patients waiting more than 180 days for THA did not show a statistically significant association with LOS. Risk factors and protective factors are the same with exception of CVD and use of local anesthetic.

Our findings suggest a positive and statistically significant association for patients waiting more than 180 days for TKA and longer acute care LOS. Longer LOS may be due to deteriorating health status while placed on a surgical waitlist and may represent a delayed and indirect cost to the patient and the healthcare system. Ultimately with projected increase in demand for elective joint replacement surgeries, our findings are aimed to inform physicians and policy makers in management of surgical waitlist efficiency and cost effectiveness.

For any reader inquiries, please contact shahriar-s@hotmail.com

The dual mobility design concept for acetabular components is intended to reduce the risk of dislocation and increase range of motion, but the wear pattern of this design is unclear and may have implications in implant fixation. Additionally, the solid back cups do not have the option for supplementary screw fixation, providing an additional smooth articulating surface for the liner to move against. The objective of this study was to assess cup fixation by measuring implant migration as well as proximal femoral head penetration to evaluate wear performance.

Thirty subjects were recruited in a consecutive series prospective study and received dual mobility uncemented acetabular components with mobile bearing polyethylene liners through a direct lateral approach. Femoral stems were cemented or uncemented. All subjects had 28 mm femoral heads. The femur, acetabulum, and non-articulating surface of the mobile polyethylene liner were marked with tantalum beads. Radiostereometric analysis (RSA) exams were performed post-operatively and at 6 weeks, 3 months, 6 months, 1 year, 2 years, and 3 years. Oxford 12 Hip and Satisfaction questionnaire responses were recorded. Mobile bearing motion was assessed under fluoroscopy for a single case under loaded and unloaded conditions.

Twenty-nine subjects (17 female) proceeded to surgery. Subjects were 63±11 years of age with BMIs of 28±4.7 kg/m2. Cup migration reached 0.16 ± 0.31 mm of proximal translation and 0.29±1.03 degrees of sagittal rotation at three years. A single individual had more than 3 degrees of cup rotation, occurring by 6 months and not substantially increasing after this time. Proximal translation was low for this subject. Wear of the highly cross-linked mobile bearings was 0.18 ± 0.30 mm of proximal femoral head penetration from 0 to 3 years. The mean wear rate from 1 to 3 years was 0.02 mm/year. One subject was an outlier for wear, with more than 1 mm of femoral head penetration at 1 year. However, wear did not increase after 1 year for this subject and cup migrations were below average for this individual. Similarly, the outlier for cup rotation had below average wear. Satisfaction (out of 100%) improved from 25±27% to 96±7% pre-operatively to 3 years post-operatively. Oxford 12 scores (best possible score of 48) improved from 21±7 to 43±7 over the same period. The fluoroscopic case study demonstrated visible motion of the mobile bearing during hip rotation tasks.

The overall migration of the cup was low and demonstrated favorable patterns suggesting low risk of aseptic loosening. Wear rates are also within the expected range of 0 to 0.06 mm/year for highly cross-linked polyethylene. The combination of low subsidence and low sagittal rotations of the cup, and low wear of the polyethylene are favorable predictors of good long-term performance.

Revision is a key negative outcome of joint replacements. The purpose of this abstract is to present revision risk curves for hip and knee replacements based on the most recently available national data sources. Having a better understanding of determinants of revision risk can help inform clinical and health care system improvements.

We explored revision risk of primary joint replacement stratified by key clinical, prosthesis, and surgeon-level factors using data from three databases managed by CIHI: the Canadian Joint Replacement Registry (CJRR), the Discharge Abstract Database, and the National Ambulatory Care Reporting System. To investigate early revisions, we used Kaplan-Meier analysis stratified by demographic factors to determine the risk of revision within up to five years of primary surgery. This analysis identified the primary cohort from the CJRR from April 1, 2012 to March 31, 2017 and was limited to mandatory reporting provinces (British Columbia, Manitoba and Ontario) to ensure maximal coverage of prosthesis information. Bearing surface was obtained from the International Prosthesis Library maintained by the International Consortium of Orthopaedic Registries (ICOR) and the International Society of Arthroplasty Registers (ISAR).

The total revision risk cohort contained 283,620 primary surgeries, of which 5,765 (2%) had at least one revision. For total hip arthroplasties, revision risk at the end of the follow-up period did not differ by age, by sex or across bearing surface (metal on cross-linked polyethylene [XLPE], ceramic on XLPE, ceramic on ceramic, metal on non-cross-linked polyethylene). For hemiarthroplasties in hip fracture patients, cement fixation was significantly associated with decreased revision risk. Surgeon volume had a positive effect on survivorship with cementless fixation (2.7% at one year [95% CI 2.3%, 3.1%] for high-volume vs 3.2% [2.7%, 3.7%] for low-volume). However, surgeon volume did not have an effect on survivorship with cemented fixation (2% at one year [95% CI 1.3%, 2.6%] for high-volume vs. 2% [1.4%, 2.6%] for low-volume). For total knee replacements, revision risk increased with decreasing age and male sex. For patients aged 75 and older, four-year revision risks were 1.5% (95% CI 1.3%, 1.7%) for women and 2.0% (1.7%, 2.3%) for men, but for patients under 55 years old, they were 4.3% (3.7%, 5%) for women and 5.9% (4.9%, 6.9%) for men. Additional results from the upcoming 2019 CJRR annual report, including data up to March 31, 2018, will be presented.

Revisions represent a key failure of the primary replacement, they are costly to the health care system and negatively affect patients' quality of life. CJRR's coverage is currently 72%, increased coverage and follow-up time will allow increasingly comprehensive reporting on hip and knee prostheses in Canada. Future work in this area involves exploring additional prosthesis attributes for stratification of revision risk curves and calculation of hazards ratios adjusted by age and sex.

Radiostereometric analysis (RSA) allows for precise measurement of interbody distances on X-ray images, such as movement between a joint replacement implant and the bone. The low radiation biplanar EOS imager (EOS imaging, France) scans patients in a weight-bearing position, provides calibrated three-dimensional information on bony anatomy, and could limit the radiation during serial RSA studies. Following the ISO-16087 standard, 15 double exams were conducted to determine the RSA precision of total knee arthroplasty (TKA) patients in the EOS imager, compared to the standard instantaneous, cone-beam, uniplanar digital X-ray set-up.

At a mean of 5 years post-surgery, 15 TKA participants (mean 67 years, 12 female, 3 male) were imaged twice in the biplanar imager. To reduce motion during the scan, a support for the foot was added and the scan speed was increased. The voltage was also increased compared to standard settings for better marker visibility over the implant. A small calibration object was included to remove any remaining sway in post-processing.

The 95% confidence interval precision was 0.11, 0.04, and 0.15 mm in the x, y, and z planes, respectively and 0.15, 0.20, and 0.14° in Rx, Ry, and Rz. Two participants had motion artifacts successfully removed during post-processing using the small calibration object.

With faster speeds and stabilization support, this study found an in vivo RSA precision of ≤ 0.15 mm and ≤ 0.20° for TKA exams, which is within published uniplanar values for arthroplasty RSA. The biplanar imager also adds the benefits of weight bearing imaging, 3D alignment measurements, a lower radiation dose, and does not require a reference object due to known system geometry and automatic image registration.

Identifying knee osteoarthritis (OA) patient phenotypes is relevant to assessing treatment efficacy, yet biomechanical variability has not been applied to phenotyping. This study aimed to identify demographic and gait related groups (clusters) among total knee arthroplasty (TKA) candidates, and examine inter-cluster differences in gait feature improvement post-TKA.

Knee OA patients scheduled for TKA underwent three-dimensional gait analysis one-week pre and one-year post-TKA, capturing lower-limb external ground reaction forces and kinematics using a force platform and optoelectronic motion capture. Principal component analysis was applied to frontal and sagittal knee angle and moment waveforms (n=135 pre-TKA, n=106 post-TKA), resulting in a new uncorrelated dataset of subject PCscores and PC vectors, describing major modes of variability throughout one gait cycle (0–100%). Demographics (age, gender, body mass index (BMI), gait speed), and gait angle and moment PCscores were standardized and assessed for outliers. One patient exceeding Tukey's outer (3IQR) fence was removed. Two-dimensional multidimensional scaling followed by k-medoids clustering was applied to scaled demographics and pre-TKA PCscores [134×15]. Number of clusters (k=2:10) were assessed by silhouette coefficients, s, and stability by Adjusted Rand Indices (ARI) of 100 data subsets. Clusters were validated by examining inter-cluster differences at baseline, and inter-cluster gait changes (PostPCscore–PrePCscore, n=105) by k-way ANOVA and Tukey's honestly significant difference (HSD) criterion.

Four (k=4) TKA candidate groups yielded optimum clustering metrics (s = 0.4, ARI=0.75). Cluster 1 was all-males (male:female=19:0) who walked with faster gait speeds (1>2,3), larger flexion angle magnitudes and stance-phase angle range (PC1 & PC4 1>2,3,4), and more flexion (PC2 1>2,3,4) and adduction moment (PC2 & PC3 1>2,3) range patterns. Cluster 1 had the most dynamic kinematics and kinetic loading/unloading range amongst the clusters, representing a higher-functioning (less “stiff”) male subset. Cluster 2 captured older (2>1,3) males (31:1) with slower gait speeds (2 4), and lower flexion angle magnitude (PC1 3 2,3) and less stiff kinematic and kinetic patterns relative to Clusters 2 and 3, representing a higher-functioning female subset. Radiographic severity did not differ between clusters (Kellgren-Lawrence Grade, p=0.9, n=102), and after removing demographics and re-clustering, gender differences remained (p < 0 .04). Pre-TKA, higher-functioning clusters (1&4) had more dynamic loading/un-loading kinetic patterns. Post-TKA, high-functioning clusters experienced less gait improvement (flexion angle PC2, 1,4 < 3, p≥0.004, flexion moment PC2, 4 < 2,3), with some sagittal range patterns decreasing postoperatively.

TKA candidates can be characterized by four clusters, differing by demographics and biomechanical severity features. Post-TKA, functional gains were cluster-specific, stiff-gait clusters experienced more improvement, while higher-functioning clusters experienced less gain and showed some decline. Results suggest the presence of cohorts who may not benefit functionally from TKA. Cluster profiling may support triaging and developing targeted OA treatment strategies, meeting individual function needs.

Up to 20 percent of patients remain dissatisfied after primary total knee arthroplasty (TKA) surgery. Understanding the reasons for dissatisfaction post TKA may allow for better patient selection and optimized treatment for those who remain dissatisfied. The association between function, mobility and satisfaction are not well understood. The purpose of this study was to investigate the association between post-TKA satisfaction and i) pre-operative, ii) post-operative, and iii) change in knee joint function during gait.

Thirty-one patients scheduled to receive primary TKA for knee osteoarthritis (OA) diagnosis were recruited and visited the Dynamics of Human Motion laboratory for instrumented walking gait analysis (using a synchronized NDI Optotrak motion capture system and AMTI force platforms in the walkway) at two time points, first within the week prior to their surgery, and second at approximately one year after surgery. At their post-operative visit, patients were asked to indicate their satisfaction with their knee prosthesis on a scale from zero to 100, with zero being totally unsatisfied and 100 being completely satisfied. Knee joint mechanics during gait at both time points were characterized by discriminant scores, the projection of their three-dimensional knee angles and moments during gait onto an existing discriminant model that was created to optimize separation of severe knee OA and healthy asymptomatic gait patterns. This discriminant model was created using data from 73 healthy participants and 73 with severe knee OA, and includes the magnitude and pattern features (captured with principal component analysis) of the knee adduction and flexion moment, and the magnitude of the knee flexion angle during gait. Larger discriminant scores indicate improved function toward healthy patterns, and smaller scores indicate more severe function. Associations between post-operative satisfaction and pre, post and change in discriminant scores were examined using Pearson correlation analyses. We also examined associations between satisfaction and pre-operative BMI, EQ5D and Oxford 12 scores, as well as changes in these scores from pre to post-TKA.

Discriminant scores representing knee joint function during gait significantly improved on average after surgery (P =0.05).

While overall knee joint function improved after primary TKA surgery, the amount of improvement in function was not reflected in post-operative patient satisfaction. However, the pre-operative function of the patient was negatively associated with satisfaction, indicating that patients with higher pre-operative function are overall less satisfied with their TKA surgery, regardless of any functional improvement due to the surgery. Interestingly, the only significant association with post-operative satisfaction was knee joint function, and the relationship between function and patient satisfaction following TKA appears to relate only to the baseline functional state of the patient, and not with functional improvement. This suggests that dissatisfaction post-surgery is more likely reflecting the unmet expectations of a higher functioning patient, and has implications for the need for improved understanding of pre-operative patient functional variability in TKA triage and expectation management.

The purpose of this study was to examine the influence of weight-bearing on the measurement of in vivo wear of total knee replacements using model-based RSA at 1 and 2 years following surgery.

Model-based RSA radiographs were collected for 106 patients who underwent primary TKR at a single institution. Supine RSA radiographs were obtained post-operatively and at 6-, 12-, and 24-months. Standing (weight-bearing) RSA radiographs were obtained at 12-months (n=45) and 24-months (n=48). All patients received the same knee design with a fixed, conventional PE insert of either a cruciate retaining or posterior stabilized design. Ethics approval for this study was obtained.

In order to assess in vivo wear, a highly accurate 3-dimensional virtual model of each in vivo TKA was developed. Coordinate data from RSA radiographs (mbRSA v3.41, RSACore) were applied to digital implant models to reconstruct each patient's replaced knee joint in a virtual environment (Geomagic Studio, 3D Systems). Wear was assessed volumetrically (digital model overlap) on medial and lateral condyles separately, across each follow-up. Annual rate of wear was calculated for each patient as the slope of the linear best fit between wear and time-point. The influence of weight-bearing was assessed as the difference in annual wear rate between standing and supine exams. Age, BMI, and Oxford-12 knee improvement were measured against wear rates to determine correlations.

Weight bearing wear measurement was most consistent and prevalent in the medial condyle with 35% negative wear rates for the lateral condyle. For the medial condyle, standing exams revealed higher mean wear rates at 1 and 2 years, supine, 16.3 mm3/yr (SD: 27.8) and 11.2 mm3/yr (SD: 18.5) versus standing, 51.3 mm3/yr (SD: 55.9) and 32.7 mm3/yr (SD: 31.7). The addition of weight-bearing increased the measured volume of wear for 78% of patients at 1 year (Avg: 32.4 mm3/yr) and 71% of patients at 2 years (Avg: 48.9 mm3/yr). There were no significant (95% CI) correlations between patient demographics and wear rates.

Volumetric, weight-bearing wear measurement of TKR using model-based RSA determined an average of 33 mm3/yr at 2 years post-surgery for a modern, non-cross-linked polyethylene bearing. This value is comparable to wear rates obtained from retrieved TKRs. Weight-bearing exams produced better wear data with fewer negative wear rates and reduced variance. Limitations of this study include: supine patient imaging performed at post-op, no knee flexion performed, unknown patient activity level, and inability to distinguish wear from plastic creep or deformation under load. Strengths of this study include: large sample size of a single TKR system, linear regression of wear measurements and no requirement for implanted RSA beads with this method. Based on these results, in vivo volumetric wear of total knee replacement polyethylene can be reliably measured using model-based RSA and weight-bearing examinations in the short- to mid–term. Further work is needed to validate the accuracy of the measurements in vivo.

Introduction

Identifying knee osteoarthritis patient phenotypes is relevant to assessing treatment efficacy. Biomechanical variability has not been applied to phenotyping, yet features may be related to outcomes of total knee arthroplasty (TKA), an inherently mechanical surgery. This study aimed to i) identify biomechanical phenotypes among TKA candidates based on demographic and gait mechanic similarities, and ii) compare objective gait improvements between phenotypes post-TKA.

Aims

Patient-specific instrumentation of total knee arthroplasty (TKA) is a technique permitting the targeting of individual kinematic alignment, but deviation from a neutral mechanical axis may have implications on implant fixation and therefore survivorship. The primary objective of this randomized controlled study was to compare the fixation of tibial components implanted with patient-specific instrumentation targeting kinematic alignment (KA+PSI) versus components placed using computer-assisted surgery targeting neutral mechanical alignment (MA+CAS). Tibial component migration measured by radiostereometric analysis was the primary outcome measure (compared longitudinally between groups and to published acceptable thresholds). Secondary outcome measures were inducible displacement after one year and patient-reported outcome measures (PROMS) over two years. The secondary objective was to assess the relationship between alignment and both tibial component migration and inducible displacement.

Aims

Early implant migration measured with radiostereometric analysis (RSA) has been proposed as a useful predictor of long-term fixation of tibial components in total knee arthroplasty. Evaluation of actual long-term fixation is of interest for cemented components, as well as for cementless fixation, which may offer long-term advantages once osseointegration has occurred. The objective of this study was to compare the long-term migration with one- and two-year migration to evaluate the predictive ability of short-term migration data and to compare migration and inducible displacement between cemented and cementless (porous metal monoblock) components at least ten years postoperatively.

Aims

The introduction of a novel design of total knee arthroplasty (TKA) must achieve outcomes at least as good as existing designs. A novel design of TKA with a reducing radius of the femoral component and a modified cam-post articulation has been released and requires assessment of the fixation to bone. Radiostereometric analysis (RSA) of the components within the first two postoperative years has been shown to be predictive of medium- to long-term fixation. The aim of this study was to assess the stability of the tibial component of this system during this period of time using RSA.

Introduction

Cementless fixation in total knee arthroplasty has been proposed to offer advantages long-term once osteointegration has occurred as there is no substrate between the implant and the bone to fail. Radiostereometric analysis (RSA) is a useful tool to study fixation, but typically focused on early migration in the first two post-operative years. Few studies have looked at 10-year RSA migration in cementless fixation and those that have contain small numbers of subjects. The objective of this study was to compare implant migration and inducible displacement between cemented and cementless TKA at 10 years and to compare the 10-year migration to the 2-year data in an effort to validate the predictive modelling of RSA.

Aims

Hydroxyapatite coatings for uncemented fixation in total knee arthroplasty can theoretically provide a long-lasting biological interface with the host bone. The objective of this study was to test this hypothesis with propriety hydroxyapatite, peri-apatite, coated tibial components using component migration measured with radiostereometric analysis over two years as an indicator of long-term fixation.

Metal-on-metal resurfacing of the hip (MoMHR) has enjoyed a resurgence in the last decade, but is now again in question as a routine option for osteoarthritis of the hip. Proponents of hip resurfacing suggest that its survival is superior to that of conventional hip replacement (THR), and that hip resurfacing is less invasive, is easier to revise than THR, and provides superior functional outcomes. Our argument serves to illustrate that none of these proposed advantages have been realised and new and unanticipated serious complications, such as pseudotumors, have been associated with the procedure. As such, we feel that the routine use of MoMHR is not justified.

Cite this article: Bone Joint J 2014;96-B(11 Suppl A):17–21.

Satisfaction is increasingly employed as an outcome measure for a successful total knee replacement (TKR). Satisfaction as an outcome measure encompasses many different intrinsic and extrinsic factors related to a person’s experience before and after TKR. The Swedish Knee Arthroplasty Registry has previously demonstrated on a large population study that 17% of TKR recipients are not satisfied with their TKR outcome. This finding has been replicated in other countries. Similar significant factors emerged from these registry studies that are related to satisfaction. It would appear that satisfaction is better after more chronic diseases and whether the TKR results in pain relief or improved function. Importantly, unmet pre-operative expectations are a significant predictor for dissatisfaction following a TKR. It may be possible to improve rates by addressing the issues surrounding pain, function and expectation before embarking on surgery.

Cite this article: Bone Joint J 2013;95-B, Supple A:148–52.

Purpose

To determine if minimally invasive surgery (MIS) for primary hip replacement surgery increases the risk of long term aseptic loosening as predicted by implant micromotion measured with radiostereometric analysis (RSA).

Purpose

The purpose of this study was to assess the clinical outcomes over two years for total ankle arthroplasty (TAA) using Short Form-36, Foot Function Index and Ankle Osteoarthritis Scores, and to compare these with radiostereometric analysis longitudinal migration and inducible displacement results.

Purpose

The purpose of this study was to assess the biomechanical stability of the a total ankle arthroplasty system using longitudinal migration (LM) and inducible displacement (ID) measures. This study is the first study of its kind to assess total ankle arthroplasty (TAA) implant micromotion using model-based radiostereometric analysis (MBRSA).

Purpose

To characterize the knee kinematic profiles of total knee arthroplasty patient knees intraoperatively, before implant insertion, using principal component analysis.

Purpose

Aseptic loosening of the tibial component of total knee prosthesis is a common cause of revision surgery. While micromotion at the bone-implant interface can now be accurately measured with Radiostereometric Analysis (RSA), mechanisms responsible for loosening remain poorly understood. The purpose of this study was to investigate the association between bone density in the proximal tibia and post-operative knee implant migration.

Purpose

To compare Radiostereometric Analysis (RSA) and subjective outcomes of Total Knee Arthroplasty (TKA) and Total Ankle Arthroplasty (TAA).

Purpose

The foam metal backed Advance BioFoam Knee Arthroplasty components utilize a porous titanium coating on the underside of the tibial baseplate, intended to promote bone in-growth and provide a more robust bone-implant interface without cement. There is also a version of the Biofoam Advance that incorporates screwed fixation that allows for augmented fixation with up to four titanium screws; however, it is not clear that this augmentation is necessary. The purpose of this study was to employ radiostereometric analysis (RSA) to compare implant migration in a randomized controlled trial of this implant design with or without screw fixation.

Purpose

To evaluate the five year Radiostereometric Analysis (RSA) results of the NexGen LPS Trabecular Metal Tibial Monoblock component (TM) and the NexGen Option Stemmed cemented component (Cemented), (Zimmer, Warsaw IN).

Purpose: To determine if MIS for primary hip replacement surgery increases the risk of long term aseptic loosening as predicted by implant micromotion measured with radiostereometric analysis (RSA).

Method: Ninety patients undergoing primary THA for osteoarthritis (exclusion criteria: post-traumatic arthritis, rheumatoid arthritis, hip dysplasia, previous hip infection) were randomized to undergo THR surgery utilizing the standard direct lateral approach (n=45; 24 male; age=58 yrs; BMI=27) or MIS via a one-incision direct lateral approach using specific instrumentation (n=45; 23 male; age=55; BMI=29). Uncemented acetabular and femoral (ProfemurZ) components were used with ceramic on ceramic bearings. The femur was marked with 9 tantalum beads placed in the greater trochanter, lesser trochanter, and femoral shaft distal to the tip of the prosthesis. Post-operative care was be standardized according to the care maps at our institution. Primary outcome measure was femoral stem MTPM (maximum total point motion) measured using Model-based RSA. Stereo supine X-rays were taken before weight bearing and 3, 6, and 12 months postoperatively. At the same time intervals Harris Hip Score, Oxford-12, WOMAC, and SF36 questionnaires were administered. Rates of infection, dislocation and revision were recorded.

Results: Eleven patients were lost to follow-up (4 due to missing post-op exams; 5 did not have enough beads placed during surgery; 2 were revised due to failure of the ceramic femoral head). There were five long neck fractures at 17–30 months postop that are reported in detail in a related abstract. There were no differences between groups for all outcome measures. Mean MTPM at 12 months was 2.5mm (SD=1.8mm) for the MIS group and 2.6mm (SD=1.2mm) for the standard group.

Conclusion: No difference between groups at one year indicates MIS for uncemented primary THR through a direct lateral approach does not appear to negatively affect stability of the femoral stem. Although promising, these results require confirmation with 2-year RSA data.

Purpose: The goal of this study was to investigate if musculoskeletal activation patterns measured with electromyography (EMG) are predictive of migration of total knee replacements (TKR) measured with radiostereometric analysis (RSA).

Method: 37 TKR patients who were part of a larger randomized controlled RSA trial were recruited to this study. Study participants had been randomized to receive the Nexgen LPS Trabecular Metal tibial monoblock component (n = 19), or the cemented NexGen Option Stemmed tibial component (n = 18) (Zimmer, Warsaw IN). Ethics approval was received from the institutional review board. In the week prior to their surgery, the patients went to the dynamics of human motion laboratory and underwent EMG data collection. Surface electrodes were placed over the vastus lateralis, vastus medialis, rectus femoris, the lateral and medial hamstrings, and the lateral and medial gastrocnemius using standardized placements (Hubley-Kozey et al., 2006). The variability in subject EMG patterns was captured with a set of discrete scores that represented weightings on objectively-extracted features of the gait waveform data using principal component analysis (PCA). Within four days of surgery and at six months post-operatively, patients had bi-planar knee x-rays taken. RSA analysis was performed with MB-RSA (MEDIS, Leiden). RSA results were reported as maximum total point motion (MTPM), and six degrees of freedom translations and rotations at six months.

Results: A correlation was found between the third principle component of the lateral gastrocnemius muscle (representing high gastrocnemius activation in late stance) and the anterior migration of the component (R2=0.247 P=0.002). A correlation was found between the vastus medialis principle component three (representing low vastus medialis activation in late stance) and the anterior migration of the component (R2= 0.338, P=0.000). A stepwise regression model was developed for anterior migration of the tibial component. To reduce the number of terms in the model only the two EMG variables that were correlated with anterior migration, implant type and BMI were entered leaving four possible terms. The stepwise regression eliminated all variables but the lateral gastrocnemius and the vastus medialis. The regression equation was Anterior-Posterior Migration = 0.01 +0.12*Vastus Medialis PC3 + 0.074*Lateral Gastrocnemius PC3 (R2=0.487, R2 Adj=0.457, P< 0.0001)

Conclusion: It has previously been shown that anterior shear on the tibial component of TKR is temporally localized to the last third of stance phase of gait. Both the gastrocnemius and vastus muscle groups have the ability to produce large anterior posterior shear on an the knee during late stance. This result shows that variables which capture the temporal activation patterns of these muscles preoperatively are related to the migration of the tibial component of TKR postoperatively. This may have implications for rehabilitation of these patients.

Purpose: To report a series of unexpected femoral neck failures in a series total hip replacement surgeries using a modular femoral component.

Method: A series of 443 hip replacement patients received modular necks as part of a non cemented hip replacement with ceramic articulations at the acetabulum and femoral head interface. The first implant of the device was on June 8, 2004 and the last on June 12, 2009. Ninety-one of those patients were enrolled in a RSA study of component stability within the proximal femur.

Results: The index fracture of a femoral neck occurred on March 8, 2009 when the patient (28 months post hip replacement) reported a fall. Subsequently five patients have had a fracture of the modular neck. There were five fractures within the RSA study group and one within the non study group (all occurred 17 months to 30 months post op). All fractures were long necks (10.5 mm). There was no difference in femoral component micromotion as measured with RSA between the fractured group and the unrevised group.

Conclusion: Initial non-destructive testing of one retrieval revealed fatigue failure of the femoral neck. An independent study of all relevant data was implemented which included destructive testing of the implants and clinical data with respect to patient activity. We report the outcome of all those investigations.

Purpose: Component loosening is a leading cause of joint replacement failure. Modifying titanium surfaces with chemically bound functional proteins, such as bone morphogenetic protein (BMP), can efficiently strengthen the interface between prosthesis and bone. A prototype system was developed by using gold nanoparticles (AuNPs) to bridge lysozyme (compositionally similar to BMP) and titanium.

Method: For reference, lysozyme-conjugated gold nanoparticles (Lys-AuNPs) were prepared in solution via two different pathways:

gold compound was reduced in the presence of lysozyme to form Lys-AuNPs or

Both solutions were characterized with transmission electron microscopy, ultraviolet-visible spectroscopy, circular dichroism spectroscopy (CD), and enzymatic assays. Next, AuNPs were prepared on 99.5% titanium foil discs (n=32) through electroless deposition. Deposition parameters were modified to create two groups of discs with different average diameters of AuNPs, measured by scanning electron microscopy. Some discs from both groups also underwent treatment with MPA. All discs were treated with lysozyme and the adsorbed amounts and activities of lysozyme were examined with micro BCA and enzymatic assays.

Results: Lysozyme and AuNPs can be conjugated in solution via two different pathways. CD results showed a significant change in the secondary structure of the lysozyme and decrease in enzymatic activity when directly conjugated to AuNPs; however, little change in secondary structure and enzymatic activity was observed for the lysozyme with MPA functionalized AuNPs. For the AuNPs on the titanium discs, SEM showed that the two groups had significantly different average AuNP diameters. Bioactive lysozyme was immobilized onto the discs and the results suggested that discs with the largest AuNPs treated with MPA had higher adsorption and activity of lysozyme.

Conclusion: A wet-chemical technique may be used to bind lysozyme to titanium via gold nanoparticles. Additionally, it was possible to control the size of the AuNPs on titanium which provides a good platform for further functionalisation with thiol molecules such as MPA. This technique holds promise for binding more functional molecules to surgical implants, hence creating “smart” implants that react to their local environment.

Purpose: Despite their inclusion within clinical practice, standardized radiographs may not accurately project an individual’s level of function and mobility. The purpose of this study is to examine the potential relationship between established radiographic features and lurch; a functional measure of asymmetric gait, in a group of patients who will receive total hip arthroplasty (THA).

Method: Thirty-two patients (16 females, 16 males) identified as hip replacement candidates were recruited, with a mean age of 57.0 years. Lurch was obtained using the Walkabout Portable Gait Monitor (WPGM); a wireless, triaxial accelerometry device. The independent variables were comprised of the Kellgren-Lawrence Scale, and a collection of standard radiographic features, as adopted by the American Academy of Orthopaedic Surgeons (AAOS), the National Institutes of Health (NIH), and the World Health Organization (WHO). Radiographs were blinded, and the surgeon completing the rating scale was unaware of patient’s lurch values. Age-adjusted regression analyses were used to examine the potential association between each radiographic feature and lurch.

Results: Increased amounts of lurch (i.e. functional impairment) were independently associated with higher Kellgren-Lawrence Scale scores (p=.047), increased Joint Space Narrowing in the mid-portion of the joint (zone 2; p=.004), the presence of acetabular wear (p=.045), an increased severity of subchondral femoral head cysts (p=.004), and higher surgeon-rated Visual Analog Scale scores for overall severity of joint degeneration (p=.008). Lurch was not significantly associated with the remaining 10 features which were examined. Further analyses revealed that lurch was not significantly associated with certain demographic factors, including sex, Body Mass Index, and co-morbid health conditions.

Conclusion: Although the Kellgren-Lawrence scale was associated with an objective measure of gait, our results indicate that other radiographic features may provide a more accurate prediction of gait performance among this patient population. As lurch appears to be a robust objective measure of physical impairment, which is unaffected by BMI and co-morbidities, we believe that portable triaxial accelerometers can likely be used to conveniently collect objective gait data. This functional data may be used to supplement clinical efforts to screen and prioritize appropriate hip arthroplasty patients.

Purpose: Radiostereometric Analysis (RSA) is used to measure migration and inducible displacement (ID) of orthopedic implant devices to allow early prediction of implant failure (eg. Aseptic loosening). Total Ankle Arthroplasty (TAA) is used for the treatment of end-stage ankle arthritis. First generation TAA implant have meet with widespread failures while some second generation TAA implants are showing improved results. In this study RSA is used to evaluate the biomechanical properties of a new third generation TAA implant in an attempt to set a standard for the biomechanical evaluation on TAA implants in-vivo.

Method: Patients undergoing TAA were enrolled consecutively (n=12; 7 males; mean age=59 years; mean BMI=29) and had 8 markers (0.08mm) inserted in both the tibia and talus during surgery. Standing, weight-bearing RSA exams were performed at 3 and 6 months and compared to concurrent supine exams to determine component ID.

Results: For tibial components: at six months the components had translated posteriorly (0.3mm±0.5) and proximally (0.5mm±0.2), tilted into varus (0.5°±1.3), and tilted posteriorly (0.4°±0.8). The magnitudes of ID for the tibial components were moderate (mean < 0.2mm and 0.5°, standard deviation < 0.3mm and 2.2° in each direction). For talar components: at six months the components had translated distally (0.28mm±0.35), rotated internally (0.21°±1.32) and tilted posteriorly (0.15°±0.90). There was varus/valgus tilt measured in the talar components but there was no consistent direction of migration (0.03°±1.4). At six months the magnitudes of ID for the talar components were small (mean < 0.1mm and 0.25°, standard deviation < 0.2mm and 0.6° in each direction).

Conclusion: An RSA methodology has been established to predict stability.

Purpose: Resurfacing arthroplasty (RA) is becoming popular as an alternative to total hip arthroplasty (THA). Direct to consumer advertising reports good to excellent outcomes and patients sometimes seek RA on the assumption that it provides increased survivorship over THA. We report the 5 year survivorship of 25 RA procedures done at one institution.

Method: 25 patients were prospectively followed after receiving a Conserve Plus RA through a direct lateral approach between 2002 and 2005. There were 22 males and 3 females with an mean age at surgery of 42 years. The average length of follow-up was 40 months. Failure was defined as revision of the components or a pending revision.

Results: At a mean of 2 years follow-up, 3 patients had been revised and 2 more were scheduled for revision surgery for a failure rate of 20%. Reasons for revision included 1 neck fracture and 2 aseptically loose acetabular components. The 2 patients waiting for revision also had aseptically loose acetabular components. Patients receiving or requiring revision were operated on throughout the series and were not necessarily part of the surgical learning curve.

Conclusion: RA of the hip done through a direct lateral approach in this series had an unacceptably high failure rate for aseptic loosening of the acetabular component.

Purpose: Porous metal technology may have significant impacts on implant fixation and long-term survival due to their high co-efficient of friction and similarity to trabecular bone in morphology and mechanical behaviour. While promising, the in vivo mechanical behaviour and micromotion at the interface has not previously been reported on. We report on the 2-year results of an RCT using radiosterometric analysis (RSA) to asses a porous metal (PM) monoblock tibial component.

Method: Patients undergoing TKA were randomized to receive a either the PM (n=34) or the cemented tibial component (n=33). A standardized protocol was used for intra and post-operative factors. RSA exams were obtained postoperatively within 4 days of surgery and at 6, 12 and 24 months. One patient was excluded due to an intraoperative complication, and four others were lost to follow-up due to poor bead visibility or morbidity. Standard subjective outcome measures were applied.

Results: There were no revisions in either group. The PM group exhibited two distinct migration patterns. One group stabilized immediately with similar migration to the cemented cases (0.38 vs. 0.46 p=0.4). A subset of 6 PM cases demonstrated significantly higher initial migration (mean=2.01mm, p< 0.01) but appeared stable at 2 years. In addition, 3 of the 6 high migration cases manifested independent bead subsidence. This was determined to be due to PM plate deformation. Two cemented cases were considered at risk for early failure due to aseptic loosening because of RSA migration pattern. There were no differences between groups in the subjective health outcome measures.

Conclusion: A subset of PM components demonstrated high early migration followed by stabilization. It appears that some of these PM components deformed under load, most often in the posteromedial corner, perhaps as a result of malalignment or ligament imbalance. The implications of this finding are yet to be determined.

Purpose: To meet the increasing demand for arthroplasty in Canada healthcare providers are investigating efficiency improvements to maximize utilization of limited surgical resources. One target is routine annual arthroplasty follow-up for which there are no established guidelines. A previous study by the authors revealed that 52% of arthroplasty patients could be followed with standardized questionnaires and x-rays resulting in a 30% savings to the healthcare system. In this study we report the patient time, travel and financial burdens for annual follow-up at a tertiary care centre versus a hypothetical model using standardized assessment at community hospitals and a web-enabled PACS.

Method: A consecutive sample survey of elective THA and TKA patients (n=158; 99 females; 94 THA; 64 TKA; mean age=69 years) who were at least twelve months postoperative. Patient’s address, work status, mode of travel and times required for travel, physician consult, x-ray, and clinic wait were recorded. A web-based mapping application was used to determine distances from patients’ homes to the tertiary care centre and nearest community hospital. Financial burden was calculated using Statistics Canada figures for average Canadian wage and private vehicle travel costs.

Results: Sixteen patients were working at the time of the study and 149 travelled in a private vehicle. For the tertiary care centre: round-trip distance was 168 km, total time burden was 194 minutes (travel=129 minutes, clinic wait=54 minutes, time with physician=6 minutes, x-ray=5 minutes), and total financial burden per patient was $58. For the community hospital: round-trip distance was 19 km, total time burden was 39 minutes (travel=14 minutes, clinic wait=20 minutes, x-ray=5 minutes), and total financial burden was $7.

Conclusion: Utilizing community hospital resources for arthroplasty follow-up could reduce patients’ travel by 89%, financial burden by 88%, and time burden by 81%. This approach has the potential to enable the focusing of arthroplasty clinic follow-up resources only on patients reporting problems or with symptomatic x-rays thus freeing up surgeon time for surgeries. There are also the broader societal implications of reducing ‘health miles’ and the resulting carbon dioxide emissions related to health care delivery by leveraging new technologies to move information rather than people.

Purpose: To test for a decrease in knee musculature co-activation at one- and two-year post total knee replacement (TKR) compared to pre-TKR values.

Method Thirty men and 35 women with knee osteoarthritis (OA), after providing informed consent, participated in this study. Surface electromyograms (EMG) recorded the activation of seven muscle sites (rectus femoris, vastus lateralis and medialis, lateral and medial hamstrings, lateral and medial gastrocnemius) while subjects ambulated, at a self-selected velocity, along a six-meter walkway; one week prior to TKR surgery, and one- and two-years post-TKR. Linear enveloped EMG waveforms, amplitude normalized to 100%MVIC and time normalized to 100% of the gait cycle, were entered into a principal component analysis model [1]. A two-factor (pre-post, muscle) repeated measures ANOVA was applied to test statistically significant main effects (pre-post, muscle) and interactions (alpha = 0.05).

Results: The mean age, mass and height pre-TKR were 63.4 years, 91.4 kg and 1.69 m, respectively. Forty seven and 25 subjects completed the one- and two-year follow up, respectively. Walking velocity increased from 0.9 m/s pre-TKR to 1.1 m/s for both one- and two-year post TKR. Four principal components explained 89% of the variance in the waveform data. PC1 (60% of the variance), associated with co-activation throughout the entire stance phase, was found to be statistically significant (p< 0.05). The post hoc analysis revealed no significant differences between one- and two-year post-TKR PC1 scores, but the two vasti muscles and lateral hamstring had significantly lower PC1 scores post-TKR compared to pre-TKR values. There were significant differences among muscles with the two vasti muscles higher pre-TKR compared to all other muscles, and lateral hamstring higher pre-TKR than the remaining four muscles.

Conclusion: PC1 captured a co-activation pattern illustrating muscle activation during the majority of the stance phase of gait for the vasti and lateral hamstring muscles. This pattern, previously shown in severe OA gait [1], is considered an adapted response to the pain and joint instability associated with latter stages of OA progression. These findings support that the neuromuscular control strategies are altered within one year with no additional change for the two year post-TKR measures. These results support a more efficient neuromuscular control strategy post-TKR and perhaps an associated decrease in metabolic cost and an improvement in function.

Purpose: To investigate the effect that gender may have on the RSA defined migration pattern of cemented and uncemented tibial components in total knee arthroplasty (TKA).

Method: 70 patients with primary osteoarthritis of the knee were randomized to receive a Nexgen uncemented Trabecular Metal (TM) monoblock tibial component (n=37; 20 female; mean age=66 years; mean BMI=32) or cemented cobalt chrome modular tibial cmponent (n=33; 19 female; mean age=65 years; mean BMI=33). The same design of posterior stabilized tibial component was used in all cases. Four experienced knee surgeons followed a standardized surgical technique (PCL resection, patella resurfacing, RSA bead placement in poly-ethylene and tibia) and post-operative protocol (CPM as tolerated, no drains, WBAT). Within 4 days of surgery and at 6, 12 and 24 months post-operatively patients underwent bi-planar x-rays. RSA analysis was performed with MB-RSA (MEDIS, Leiden). Results were reported as maximum total point motion, and 6 degrees of freedom translations and rotations. A repeated measure ANOVA was used to test for differences and all statistical analysis was performed using Minitab V.14 (Minitab Inc, State College, PA, USA).

Results: Highly significant differences were seen in the migration patterns in females between the TM and cemented tibial components. Females with the TM implant tended to rotate internally (0.29° vs. −0.16°, p< 0.0001), tilt posteriorly (−0.49° vs. 0.01°, p< 0.0001) and subside (−0.357mm vs. 0.00mm, p< 0.0001) compared with the female subjects with the cemented implant. In the male group, only subsidence was different between the TM and cemented groups (−0.344mm vs. −0.01mm, p< 0.0001).

Conclusion: Uncemented TM implants in females tended to tilt posteriorly, rotate internally and subside. Uncemented implants in males tended only to subside. The increased tilting and rotation detected in females could be due to lower BMD or to mismatching between the shape of the female proximal tibial and the tibial component. These results may have implications for the current use of uncemented implants in females and for future design of uncemented implants for the female population.

Purpose: To investigate the association between pre-operative gait patterns and the RSA defined migration migration pattern of cemented and uncemented tibial components post total knee arthroplasty (TKA).

Method: 43 patients with primary osteoarthritis of the knee underwent Optotrack gait analysis in the week before TKA surgery. Three-dimensional net external knee joint moments and angles were calculated with inverse dynamics. The variability in subject gait patterns was captured with a set of discrete scores that represented weightings on objectively-extracted features of the gait waveform data using principal component analysis. The subjects were randomized to receive the uncemented Nexgen Trabecular metal Monoblock tibial component (n=22; mean age=66 years; mean BMI=32) or the modular cemented cobalt chrome tibial component (n=21; mean age=65 years; mean BMI=33). Both groups were posterior-stabilized and used the same design femoral component. Four experienced surgeons followed a standardized surgical technique and postoperative protocol. Within 4 days of surgery and at 6 months post-operatively, patients had bi-planar knee x-rays taken. RSA analysis was performed with MB-RSA (MEDIS, Leiden). RSA results were reported as maximum total point motion, translations and rotations at 6 months. Spearman’s rank correlations were used to examine the relationship between the first three principle component (PC) scores for each gait variable and the RSA metrics (P< 0.05).

Results: There was a highly significant correlation between MTPM and the first principal component (PC) of the knee adduction moment, which represented the overall magnitude of moment during the stance phase of the gait cycle (r=0.459, P=0.005). Higher preoperative knee adduction moment magnitudes were associated with greater MTPM postoperatively. Internal rotation of the components was correlated with the second PC of internal/external rotation moment at the knee, which represented the magnitude of the moment at load acceptance (r=0.341, P=0.042). Greater knee internal rotation moments at load acceptance preoperatively were associated with higher internal rotation postoperatively.

Conclusion: The amount of postoperative migration of the tibial component in TKA was found to be correlated with preoperative gait patterns, particularly to the magnitude of the knee adduction moment.. These results suggest that surgical success and prosthesis survivorship may be dependent on the preoperative mechanical environment of the knee joint (i.e., gait).

Purpose: The purpose of this study was to determine what differences exist in the knee flexion, rotation and adduction moments and periarticular knee muscle activation patterns between subjects with medial compartment knee osteoarthritis (OA) and those with lateral compartment knee OA.

Method: Forty eight individuals with knee OA were studied. The group was divided into those with predominantly medial compartment involvement (38 subjects, age 63 ± 8 years) and those with lateral involvement (10 subjects, age 63 ± 9 years). Three-dimensional motion (Optotrak) and ground reaction force (AMTI) data were collected while the subjects walked at a self-selected velocity. The knee flexion, rotation and adduction moments, time normalized to the percentage of one gait cycle, were calculated using an inverse dynamics approach. Electromyograms (EMG) were also collected from the rectus femoris, vastus lateralis, vastus medialis, medial and lateral hamstrings, and medial and lateral gastrocnemius and normalized to maximum voluntary isometric contractions. Knee moments and waveforms for each muscle for one complete gait cycle were analyzed for group differences using principal component analysis (PCA) followed by Student’s t-tests (alpha-adj = 0.017) for the PCA scores.

Results: The two groups were statistical similar in terms of age, height, weight, and walking velocity (p> 0.05). PCA analysis revealed statistically significant differences (p< 0.017) in patterns for the knee adduction moment, medial gastrocnemius, and lateral hamstrings between the two groups.

Conclusion: As expected, there was a difference in the knee adduction moment between the two groups. What is novel is that the muscle activation patterns from the lateral site group are consistent with an attempt to unload that compartment. The results of this study provide evidence that biomechanical and neuromuscular differences do exist, depending on the OA site. This could have implications for developing site-specific conservative management approaches

To study the association between hip and ankle biomechanics during gait and moderate knee osteoarthritis (OA).

Gait analysis was performed on a group of forty-four patients clinically diagnosed with moderate knee OA, and on a group of sixty asymptomatic subjects. Three-dimensional net joint angles and net joint reaction moments at the hip, knee and ankle joints were calculated. Peak values were extracted from the gait waveform patterns and compared between the two subject groups with Student’s t-tests.

The peak hip extension moment, the peak hip adduction moment, the peak hip internal and external rotation moments, and the peak ankle dorsiflexion and plantarflexion moments were all reduced in the knee osteoarthritis population compared to the asymptomatic population.

Differences in knee joint loading patterns with moderate knee osteoarthritis have been previously reported, but these data suggest that changes in the mechanical environment of all lower extremity joints are associated with early stages of knee osteoarthritis. Other studies have associated reduced peak hip adduction moments with reduced likelihood of OA progression. These data provide a rationale for hip abductor muscle strengthening as a means to lower knee joint loading.

The Swedish Knee Arthroplasty Registry (SKAR) has recorded knee arthroplasties prospectively in Sweden since 1975. The only outcome measure available to date has been revision status. While questionnaires on health outcome may function as more comprehensive endpoints, it is unclear which are the most appropriate. We tested various outcome questionnaires in order to determine which is the best for patients who have had knee arthroplasty as applied in a cross-sectional, discriminative, postal survey.

Four general health questionnaires (NHP, SF-12, SF-36 and SIP) and three disease/site-specific questionnaires (Lequesne, Oxford-12, and WOMAC) were tested on 3600 patients randomly selected from the SKAR. Differences were found between questionnaires in response rate, time required for completion, the need for assistance, the efficiency of completion, the validity of the content and the reliability. The mean overall ranks for each questionnaire were generated. The SF-12 ranked the best for the general health, and the Oxford-12 for the disease/site-specific questionnaires. These two questionnaires could therefore be recommended as the most appropriate for use with a large knee arthroplasty database in a cross-sectional population.