Abstract
Purpose: Radiostereometric Analysis (RSA) is used to measure migration and inducible displacement (ID) of orthopedic implant devices to allow early prediction of implant failure (eg. Aseptic loosening). Total Ankle Arthroplasty (TAA) is used for the treatment of end-stage ankle arthritis. First generation TAA implant have meet with widespread failures while some second generation TAA implants are showing improved results. In this study RSA is used to evaluate the biomechanical properties of a new third generation TAA implant in an attempt to set a standard for the biomechanical evaluation on TAA implants in-vivo.
Method: Patients undergoing TAA were enrolled consecutively (n=12; 7 males; mean age=59 years; mean BMI=29) and had 8 markers (0.08mm) inserted in both the tibia and talus during surgery. Standing, weight-bearing RSA exams were performed at 3 and 6 months and compared to concurrent supine exams to determine component ID.
Results: For tibial components: at six months the components had translated posteriorly (0.3mm±0.5) and proximally (0.5mm±0.2), tilted into varus (0.5°±1.3), and tilted posteriorly (0.4°±0.8). The magnitudes of ID for the tibial components were moderate (mean < 0.2mm and 0.5°, standard deviation < 0.3mm and 2.2° in each direction). For talar components: at six months the components had translated distally (0.28mm±0.35), rotated internally (0.21°±1.32) and tilted posteriorly (0.15°±0.90). There was varus/valgus tilt measured in the talar components but there was no consistent direction of migration (0.03°±1.4). At six months the magnitudes of ID for the talar components were small (mean < 0.1mm and 0.25°, standard deviation < 0.2mm and 0.6° in each direction).
Conclusion: An RSA methodology has been established to predict stability.
Correspondence should be addressed to CEO Doug C. Thomson. Email: doug@canorth.org
