header advert
Results 1 - 7 of 7
Results per page:

Aims

The aim of this study was to assess and compare active rotation of the forearm in normal subjects after the application of a short-arm cast (SAC) in the semisupination position and a long-arm cast (LAC) in the neutral position. A clinical study was also conducted to compare the functional outcomes of using a SAC in the semisupination position with those of using a LAC in the neutral position in patients who underwent arthroscopic triangular fibrocartilage complex (TFCC) foveal repair.

Methods

A total of 40 healthy right-handed volunteers were recruited. Active pronation and supination of the forearm were measured in each subject using a goniometer. In the retrospective clinical study, 40 patients who underwent arthroscopic foveal repair were included. The wrist was immobilized postoperatively using a SAC in the semisupination position (approximately 45°) in 16 patients and a LAC in 24. Clinical outcomes were assessed using grip strength and patient-reported outcomes. The degree of disability caused by cast immobilization was also evaluated when the cast was removed.


The Bone & Joint Journal
Vol. 102-B, Issue 6 | Pages 749 - 754
1 Jun 2020
Jung H Park MJ Won Y Lee GY Kim S Lee JS

Aims

The aim of this study was to analyze the association between the shape of the distal radius sigmoid notch and triangular fibrocartilage complex (TFCC) foveal tear.

Methods

Between 2013 and 2018, patients were retrospectively recruited in two different groups. The patient group comprised individuals who underwent arthroscopic transosseous TFCC foveal repair for foveal tear of the wrist. The control group comprised individuals presenting with various diseases around wrist not affecting the TFCC. The study recruited 176 patients (58 patients, 118 controls). The sigmoid notch shape was classified into four types (flat-face, C-, S-, and ski-slope types) and three radiological parameters related to the sigmoid notch (namely, the radius curvature, depth, and version angle) were measured. The association of radiological parameters and sigmoid notch types with the TFCC foveal tear was investigated in univariate and multivariate analyses. Receiver operating characteristic curves were used to estimate a cut-off for any statistically significant variables.


Orthopaedic Proceedings
Vol. 100-B, Issue SUPP_5 | Pages 49 - 49
1 Apr 2018
Yoo J Jung H Kim S
Full Access

Injection before total knee arthroplasty(TKA) is the one of the postoprative risk factors after TKA and Infection after TKA can result in disastrous consequences. When the duration between injection and TKA is longer than 6 months, the risk is no longer elevated. Evaluation of synovial WBC number in frozen section slide is needed to check the presence of infection in revision total knee arthroplasty. Currently many patients have a history of multiple intraarticular injection before the primary TKA. Purpose of this study is to evaluate the synovial WBC findings in primary TKA and compare between injection group and no injection group. Materials and Methods. The synovial specimen(suprapatella pouch and posterior capsule) of 68 primary total knee arthroplasty were evaluated by the pathologist and reported the number of the WBC in frozen section /5 separate high power fields(HPF) (500x).. Injection group were 37 cases and non -injection group were 31 cases. Preoperative CRP and ESR were recorded and followe-up duration was more than 2 years. Joint fluid was sent to be cultured and analysed. Results. WBC count in frozen section shoed was average 4 WBCs/HPF (range < 0∼ 25) in both specimen and the suprapatella specimen was 3 WBCs/HPW (range 0∼25) and posterior capsule specimen was 1 WBCs/HPF(range 0∼14). The WBC count of injection group was 8 (range, 0∼25) and that of no injection group was 1.2 cells (range 0∼12) (p<0.05). The WBC counts in joint fluid was average 240 cells/ml (range. 1∼300) in non injection group and 643 cells/ml(range, 50∼1000) (p<0.05). The duration from the intraarticular injection to index surgery was 9 months(range, 6 weeks∼ 7 momths). The number of injection and duration bwtween injection and operationto has no significant correlation with the WBC counts. Eight percentage of specimen showed more than 10 WBCs in injection group and these patients have been not infected after more than 24 moths after TKA. Conclusion. The WBC count of the synovium in priamry TKA with injection history for degenerative osteoarthritis is variable and we could not recommend the routine frozen section analysis in primary TKA who have a history of intraarticualr injection..


Orthopaedic Proceedings
Vol. 100-B, Issue SUPP_5 | Pages 8 - 8
1 Apr 2018
Jung H Lee D Sun M Kang H
Full Access

Background

Total ankle arthroplasty (TAA) with the use of third generation implants has demonstrated favorable clinical results and improved survival. However, few studies have compared the different types of implants. The purpose of this study was to perform a retrospective evaluation of patient outcomes and complications by comparing TAA procedures performed with HINTEGRA versus MOBILITY systems.

Methods

Fifty-two consecutively enrolled patients (28 men and 24 women; mean age 64.8 years) underwent TAA using HINTEGRA (21 ankles) or MOBILITY (33 ankles) between September 2004 and July 2012. Visual analog scale (VAS) pain scores and the American Orthopedic Foot and Ankle Society (AOFAS) ankle-hindfoot scores were determined at each follow-up visit. The radiographs were reviewed to assess component positioning, radiolucency, heterotopic ossification and other factors.


Orthopaedic Proceedings
Vol. 100-B, Issue SUPP_3 | Pages 84 - 84
1 Apr 2018
Moon J Kim J Jung H
Full Access

Introduction

Suture anchor have been used in surgical procedure of tendon or ligament repair. Recently, there has been developed an all suture anchor (soft anchor) which can be used even when the insertion area is narrow. But, the stability of soft anchors due to narrow zone has not been elucidated. This purpose of this study was to investigate stability of soft anchors with respect to their fixation intervals.

Methods

Polyurethane foams with two different bone densities (10 pcf; 0.16g / cm³, 20 pcf; 0.32g / cm) were used. All suture anchors and conventional suture anchors were fixed at 10mm, 5mm, and 2.5mm intervals. The failure load was measured using a mechanical testing machine.


Orthopaedic Proceedings
Vol. 92-B, Issue SUPP_I | Pages 92 - 92
1 Mar 2010
Lee K Lee K Jung H Shim Y Jang J
Full Access

Demineralized Bone Matrix (DBM) is currently used in various types of orthopaedic applications because of osteoconductive and osteoinductive properties. Fibrin glue is also used in cardiovascular and thoracic surgery due to its hemostatic, chemotactic and mitogenic properties. There is some possibility of being good biomaterial and biodegradable scaffold with DBM-fibrin glue mixture for bone void filler. After total hip replacement surgery, it takes long time to complete bone fusion. If patients have excess weight load after surgery, the artificial joint may not be adhered with patients’s bone.

That is why surgeons have to use any effective treatments for bone fusion for patient’s safety. In order to adapt to these surgical sites, DBMs are shaped in blocks or granules and preferable in porous forms. Combining these DBMs with fibrin glue provides a moldable and self-hardening composite biomaterial. This material will be applied to total hip replacement surgery for the effective fusion between bone and artificial joint. The aim of this work is to study the osteogenic properties of this composite material using in vivo and ex vivo. In radiological study, the DBM composite had been absorbed during one week since implantation surgery and after two weeks, some radio-opaque spots were observed in implantation sites. In histology study, Bone tissue had formed exotically in contact with the surface of the appeared well-mineralized, forming trabeculae between the granules, and had characteristics similar to those of cancellous bone. Bone growth in the tissue engineered filled with DBM and fibrin glue materials increased with implantation time.

In summary, these DBM and fibrin glue composites exhibited interesting biological and mechanical properties for filling large bone defect. These composites may be used in total hip replacement surgery for the effective filler between patient’s bone and artificial joint.


Orthopaedic Proceedings
Vol. 92-B, Issue SUPP_I | Pages 128 - 128
1 Mar 2010
Jung Y Jung H Kwak J
Full Access

The aims of this study were to assess the clinical outcomes especially range of motion of the knee after total knee arthroplasty with sigma RP-F versus LCS RP.

110 knees underwent total knee arthroplasty with LCS, and 59 knees with PFC sigma RP-F. We performed a prospective clinical trial. At the time of the one-year follow-up, we compared the clinical outcomes of two groups. In LCS group, LCS AP glide type group was excluded. Range of motion, the knee score, functional score and HSS score etc. were assessed.

91 knees were available. The mean active non-weight-bearing range of motion at one year was 124 (95% confidence interval) in the fifty-six knees that underwent a LCS and 127 (95% confidence interval) in the thirty-six knees that underwent a PFC sigma RP-F (p=0.55). There were no significant differences in the knee score (the mean 94.12 in LCS, 93.54 in RP-F, p=050), functional score(the mean 62.58 in LCS, 65.14 in RP-F, p=0.91) and HSS score (the mean 87.73 in LCS, 87.85 in RP-F, p=0.50).

Although PFC sigma RP-F has the design that is advantageous in knee flexion, we found no significant differences between the groups with regard to range of motion or clinical outcomes.