Introduction

During development the central disc contains large, vacuolated notochordal (NC) cells which in humans are replaced by mature nucleus pulposus (NP) cells during aging, but are maintained in certain breeds of dogs. During degeneration the disc becomes less hydrated which affects its normal function. Aquaporins (AQP) are a family of 13 transmembrane channel proteins that allow passage of water and are responsible for maintaining water homeostasis. AQP1, 2, 3 and 5 have been identified in the intervertebral disc (IVD). Here, expression of AQPs in human and canine IVDs to determine expression in NC v/s NP cells and whether expression changes during degeneration.

Introduction

The intervertebral disc (IVD) is a highly hydrated tissue which is reduced during degeneration leading to loss of function. Aquaporins (AQP) are a family of 13 (AQP0-12) transmembrane channel proteins that selectively allow the passage of water and other small molecules in and out of cells and are responsible for maintaining water homeostasis. AQP1, 2, 3 and 5 have been identified in the IVD. Here gene and protein expression of all 13 AQPs was investigated in a large cohort of human IVDs to investigate expression during IVD degeneration.

Periprosthetic femoral fractures are a challenging problem to manage. In the literature various constructs have been designed and tested, most requiring cables for proximal fixation. The Synthes Locking Attachment Plate (LAP) has been designed to achieve proximal fixation without the use of cables.

The aim of this study was to biomechanically evaluate the LAP construct in comparison to a Cable plate construct, for the fixation of periprosthetic femoral fractures after cemented total hip arthroplasty (THA).

Twelve synthetic femora were tested in axial compression, lateral bending and torsion to determine initial stiffness, and stiffness following fixation of a simulated midshaft fracture with and without a bone gap. Two different fracture fixation constructs (six per group) were assessed. Each construct incorporated a broad curved LCP with bi-cortical locking screws for distal fixation. In the Cable construct, 2 cables and 2 uni-cortical locking screws were used for proximal fixation. In the LAP construct, the cables were replaced by a LAP with 4 bicortical locking screws. Axial, lateral bending and torsional stiffness were assessed using intact specimen values as a baseline. Axial load to failure was also measured. The LAP construct was significantly stiffer than the cable construct under axial load with a bone gap (simulating a comminuted fracture) (p=0.01). There were no significant differences between the two constructs in any of the other modalities tested. Loading to failure resulted in no significant differences between constructs, in either initial stiffness or peak load.

In conclusion the LAP construct enables bi-cortical screw fixation around a prosthesis. Compared to cables, this was stiffer when there was a bone gap and thus should offer improved proximal fixation of Vancouver B1 proximal femoral fractures in cemented THA.

Objectives

The most concerning infection of allografts and operative procedures is methicillin resistant Staphylococcus aureus (MRSA) and no current iontophoresed antibiotics effectively combat this microbe. It was initially hypothesised that iontophoresis of vancomycin through bone would not be effective due to its large molecular size and lack of charge. The aim of this study was to determine whether this was a viable procedure and to find the optimum conditions for its use.

Introduction

Periprosthetic femur fractures are a serious complication after hip replacement surgery. In an aging population these fractures are becoming more and more common. Open reduction and plate osteosynthesis is one of the available treatment options.

Aim: In order to avoid complications of hip arthroplasty such as dislocation, impingement and eccentric liner wear accurate acetabular orientation is essential. The three-dimensional assessment of acetabular cup orientation using two-dimensional plain radiographs is inaccurate. The aim of this study was to develop a CT-based protocol to accurately measure postoperative acetabular cup inclination and anteversion establishing which bony reference points facilitate the most accurate estimation of these variables.

Methods: An all-polyethylene acetabular liner was implanted into a cadaveric acetabulum. A conventional pelvic CT scan was performed and reformatted images created in both functional and anterior pelvic planes. CT images were transferred to a Freedom-Plus Graphics software package enabling an identical, virtual, three dimensional model of the cadaveric pelvis to be created. Using a computer interface this model could be ‘palpated’, bony landmarks accurately identified and definitive acetabular cup orientation established. Using original CT scans, acetabular cup inclination and anteversion were measured on five occasions by eight radiographers using differing predetermined bony landmarks as reference points. The intra- and inter-observer variation in measurement of acetabular cup orientation using varying bony reference points was assessed in comparison to the previously elucidated definitive cup position. Statistical analysis using appropriate ANOVA models was performed in order to assess the significance of the results obtained.

Results: Virtually derived definitive acetabular cup orientation was measured showing cup inclination and anteversion as 41.0 and 22.5 degrees respectively. Mean CT-based measurement of cup inclination and anteversion by eight radiographers were 43.1 and 20.8 degrees respectively. No statistically significant difference was found in intra- and inter-observer recorded results. No statistically significant differences were found when using different bony landmarks for the measurement of inclination and anteversion (p= 0.255 and 0.324 respectively).

Conclusions: CT assessment of acetabular component inclination and anteversion is accurate, reliable and reproducible when measured using differing bony landmarks as reference points. We recommend measuring acetabular inclination and anteversion from the inferior acetabular wall/teardrop and posterior ischium respectively. The Perth CT hip protocol is easily reproducible in the clinical setting both in the routine assessment of hip arthroplasty patients and as research tool. In our unit its initial application will be to validate commercially available hip navigation systems.

The aim of this study was to determine the biomechanical behavior of two different implants used in the fixation of proximal humerus fractures. The two implants in this study are specifically designed for the fixation of proximal humerus fractures and both utilize the concept of fixed angle locking screws. Bone densitometry was performed prior to fracture production and fixation. A reproducible three-part fracture was created in paired human cadaveric bone and then fixed using the locking screw implants. Stress/strain curves for the bone-implant construct were created for loads applied in cantilever bending and torsion to determine the relative stiffness below the yield point. Following this each construct was tested to failure with a valgus bending load.

The locking nail implant provided a significantly stiffer construct in torsion, valgus, extension and flexion at loads below failure threshold. The valgus load to failure was significantly higher for the nail. The mode of failure was different between implants.

Introduction: Iontophoresis is a method to introduce antibiotic molecules into allograft bone using an electrical potential; the antibiotics may then be released at therapeutic levels for extended periods of time. This is the first report of iontophoresed allograft implantation into patients.

Method: A method of loading tubular sections of cortical bone was used in theatre prior to implantation. Postoperative serum, drain and allograft antibiotic assays were performed. Patients were followed-up clinically and radiologically. All patients who received a bulk segmental allograft from June 1997 were entered into the trial.

Results: Since June 1997, 35 patients have received 37 allografts. Indications for allograft insertion were limb salvage for tumour (18), and poor bone stock associated with infection (11), periprosthetic fracture (6), aseptic loosening (1) and recurrent dislocation of total hip replacement (1). Mean follow-up is 3.3 years, and no patients have been lost to follow-up. One patient received two allografts in different sites and one had an allograft exchange. There has been one superficial wound infection and one deep infection. The latter patient was revised to another iontophoresed allograft and has had no recurrence at 34 months. One allograft has been revised to a vascularised fibular graft and allograft exchange following fracture of metal fixation. There was one case of persistent non-union in a knee arthrodesis which was treated after 21 months by removal of the intramedullary fixation and use of an Illizarov frame. The allograft was not revised. All other allografts are in situ with no complications related to the allograft. Eleven patients had pre-existing proven infections. None of these patients have been re-infected to date. Therapeutic gentamicin and flucloxacillin levels were detected in drain fluid samples post-operatively.

Conclusions: Iontophoresis is a safe and inexpensive technique that delivers high local dose of antibiotic, which may reduce infection in avascular allograft bone.

Introduction and Aims: Iontophoresis is a method to introduce antibiotic molecules into allograft bone using an electrical potential. In-vitro testing has shown that these antibiotics should be released in their bioactive form at therapeutic levels for extended periods of time. This is the first report of iontophoresed allograft implantation into patients.

Method: A method of loading tubular sections of cortical bone was used in theatre prior to implantation. The bone was held vertically in an antibiotic bath with a cylindrical outer electrode and a wire electrode down the centre of the bone. An electrical potential of approximately 90V was applied to drive the antibiotics into the bone. Post-operative serum, drain and allograft antibiotic assays were performed. All patients were followed-up clinically and radiologically. Patients who required a bulk segmental allograft from June 1997 to present were entered into the trial and received iontophoresed bone.

Results: Since June 1997, 35 patients have received 37 iontophoresed allografts. Indications for allograft insertion were limb salvage for tumor (16), poor bone stock associated with infection (12), periprosthetic fracture (seven), aseptic loosening (one) and recurrent dislocation of total hip replacement (one). One patient had acute complications requiring amputation. No patients were lost to follow-up with a mean follow-up of 3.3 years. Two patients required an allograft exchange for fracture and infection. There were two late allograft infections at 10 and 18 months. One patient was revised to another iontophoresed allograft and has had no recurrence at two years. The other infection required above knee amputation. One allograft was revised with allograft exchange and vascularised fibular graft following fracture of metal fixation. There was one case of persistent non-union in a knee fusion, which was treated after 21 months by removal of the intermedullary fixation and allograft and use of an Ilizarov frame. All other allografts are in-situ with no complications related to the allograft. Twelve patients had pre-existing proven infections. None of these patients have been re-infected to date. Therapeutic gentamicin and flucloxacillin levels were detected in drain fluid samples post-operatively, averaging from 39.9 mg/L at two hours to 5.97mg/L at 48 hours for gentamicin and 16.83mg/L at two hours and 2.23 mg/L at 48 hours for flucloxacillin. This was significantly greater than the minimum inhibitory concentration (MIC) against Staphylococcus aureus for gentamicin (0.25mg/L) and flucloxacillin (0.30mg/L). At the same time, blood levels remained in a safe range.

Conclusion: Iontophoresis is a safe and inexpensive method that can be executed in the operating theatre. Iontophoresed bone delivers a high local dose of antibiotic, which may prevent early biofilm formation initiated during allograft handling and exposure to theatre air. With no early infections and no re-infections, further assessment of this technique continues with guarded optimism.

Introduction A procedure of selective musculo-tendinous lengthenings is presented as treatment for chronic lateral elbow pain. The rationale for surgery is to decrease tensile force at the lateral epicondyle and simultaneously reduce posterior interosseous nerve compression in the radial tunnel. This study presents biomechanical and clinical data on this surgical technique.

Methods In a human cadaver study, force transducer measurements were made in the common extensor tendon, and after sequential tensioning of the muscles arising from the lateral epicondyle. In a separate cadaver study, a balloon catheter measured pressure in the radial tunnel after sequential musculo-tendinous lengthening of the forearm extensor muscles. A preliminary clinical study was performed on 12 subjects (13 elbows). All had failed extensive conservative treatment and subsequently underwent combined musculo-tendinous lengthening of ECRB, EDC, and superficial head of supinator (SHS). In the clinical series, 75% of subjects were involved in Work Cover claims. Clinical outcomes in this small series were reviewed.

Results ECRB and EDC tensioning produced the largest force transducer measurements in the common extensor tendon at the lateral epicondyle. SHS increased force transducer measurements moderately, suggesting this muscle may also contribute to the clinical syndrome of lateral epicondylitis. ECRL and ECU tensioning lead to non significant increases in force transducer measurements. Radial tunnel pressure dropped substantially (77%) after musculo-tendinous lengthening of SHS. Lengthening of other forearm extensors had little effect on measured radial tunnel pressure. All subjects recorded improvement in visual analogue pain scores, with post-operative scores between zero and two. Grip strength was preserved or improved. By the criteria of Roles and Maudsley, nine elbows were excellent, two good, one fair and one poor. Overall 11 of the 12 subjects reported they would have the procedure again.

Conclusions This study demonstrates a biomechanical basis for SHS in the aetiology of lateral epicondylitis and radial tunnel syndrome, and supports a combined musculo-tendinous lengthening of ECRB, EDC, and SHS in the treatment of chronic lateral elbow pain. Satisfactory clinical results are reported in this group of patients including those involved in Work Cover claims.