Aims

The diversity of femoral morphology renders femoral component sizing in total hip arthroplasty (THA) challenging. We aimed to determine whether femoral morphology and femoral component filling influence early clinical and radiological outcomes following THA using fully hydroxyapatite (HA)-coated femoral components.

Introduction

Locking nail have considerably improved the treatment of long weight bearing bones. However, distal locking needs experience and may expose to radiations. Many methods have been proposed to facilitate distal locking and improve safety. Recently, an external distal targeting device adapted to the ancillary of the Long Gamma Nail has been proposed. We report our experience with this device through a comparative series of distal lockings. Aim of this work was to assess feasibility and advantages brought about with this targeting device when considering time or dose of irradiation.

Purpose of the study: Computed tomography is recommended for the preoperative work-up of joint fractures as it allows an optimisation of the access as a function of the injury. During the operation, 2D radiographic or fluoroscopic controls are still widely used. After one year’s experience, we evaluated the potential pertinence of using 3D reconstructions intraoperatively with a mobile isocentric fluoroscope (iso-C-3D).

Material and methods: All operations for which the amplifier was used were collected prospectively. The type of fixation as well as the details of the installation and measures taken intraoperatively were noted.

Results: At one year, intraoperative 3D reconstructions were made during 48 operations in 47 patients: fracture of the calcaneum (n=13), thoracolumbar spin (n=12), acetabulum (n=11), tibial condyles (n=9), odontoid (n=2), pelvis (n=1). The installation was habitual for the calcaneum and odontoid fractures. For the other localizations, use of a carbon plateau table facilitated good quality imaging for spinal and tibial condyle fractures; a carbon orthopaedic table was useful for acetabulum and pelvis fractures. With the intraoperative 3D reconstruction the surgeon was able to check the freedom of the canal after reduction and fixation. For the calcaneum fractures, reduction of the thalamic fragment was revised in one patient; in another, an intra-articular screw was replaced. One intra-articular screw stabilizing the posterior wall was also changed during an acetabulum fixation.

Discussion: During our first year of use, 3D reconstruction intraoperatively has allowed us to avoid three early reoperations (for two calcaneums and one acetabulum). Classical 2D imaging of these two localizations is difficult to interpret because of the spherical form of the hip joint and, for the calcaneum, the difficulty in obtaining quality retrotibial images. Quality images requires specific installation, limiting interference with metallic supports.

Conclusion: The results we have obtained in our first year of use of the ISO-C-3D amplifier has led us to generalise its use for percutaneous fixation procedures involving the acetabulum and the calcaneum.

Purpose of the study: We report a prospective consecutive series of femoral fractures on prosthesis. The goal was to evaluate mid-term outcome of treatment with a locking plate.

Material and methods: From June 2002 to December 2007, we treated 35 patients (1 bilateral), 28 female and 7 male, with a fracture around their total hip arthroplasty (n=21), total knee arthroplasty n=7), unicompartmental knee prosthesis (n=1), between a THA and a TKA (n=2), or between a trochanteric osteosynthesis and a TKA (n=5). Mean age was 76 years (39–93). For the majority, osteosynthesis was achieved via a mini-invasive incision, using a locking plat (Synthes^®) bridging the implant in situ. The rehabilitation protocol consisted in immediate weight-bearing for most of the cases.

Results: At revision, one patient was lost to follow-up, one was an early failure, and seven patients had died, including four which were retained for the analysis because data was available for 24, 40, 43 and 67 months respectively. The analysis thus included 30 patients with 31 fractures and mean 26 months follow-up (range 6 – 67 months). The following results were obtained for the initial series: mini-invasive surgery (n=26), access to fracture focus (n=10), total postoperative weight bearing (n=20), partial weight bearing at 20 kg (n=3), no weight-bearing for six weeks (n=13). Complications were: infection (n=2), general (n=2), disassembly (n=3, one femoral stem replacement and two revision ostheosynthesis). Bone healing was obtained in all cases except one. There was a misalignment > 5 in five cases. At review, there was no implant loosening.

Discussion: This work shows that locking compression plates inserted via a mini-invasive approach followed by weight-bearing is a feasible option. This technique combines the principles of closed osteosynthesis with preservation of the haematoma and stability of osteosynthesis material. The rehabilitation protocol was developed in consideration of the nature of the material. The locked plate acts like an internal fixator, allowing increased implant stability. Screw hold appeared to be sufficient to allow early weight-bearing.

Conclusion: Use of locking compression plates for femoral fractures on osteosynthesis implants is effective. The stability of the assembly allow, despite the age of the patients, early weight-bearing and walking, with a stable outcome over time.

Purpose of the study: Revision total knee arthroplasty (rTKA) is becoming a routine procedure. The technical problems are greater than with a first-intention implantation because of the potential malposition of the initial implants, loss of bone stock, and prior ligament injury. It could be hypothesised that as for implantation of a primary TKA, navigation might improve the quality of the implantation.

Material and methods: We used the Orthopilot™ (Aesculap, RFA) navigation system for first-intention TKA. The standard software was used for revisions. The acquisition of the anatomic and kinematic data was performed while the initial implants in situ. The implants were then removed. Any bone recuts required were done under navigation control. The size of the implants and their thickness were determined after digital simulation of residual laxity; ligament balance was adapted from this data. The system does not allow navigation for centromedullary stem extensions nor for filling potential bone defects. Sixty patients underwent the procedure. There was a comparative series of 30 patients who underwent manual conventional revision using an instrumentation guided by the centromedullary femoral and tibial stems. The quality of the implantation was determined by measuring the alignment of the limb and the orientation of the implants on the postoperative x-rays. Outcome was analysed with Student’s t test and the chi-square test with p< 0.05 taken as significant.

Results: There was a significant improvement in quality of the implantation for all radiographic criteria in the navigation group. Limb alignment was restored in 88% of the navigated cases and 73% of the conventional cases. Similar differences were observed for femoral and tibial implant position on the lateral and AP views.

Discussion: The objectives set for implant orientation and ligament balance can be met with the navigation system for the majority of knees, with a rate similar to that achieved with primary implantation. The navigation system is an appreciable aid for these often difficult procedures where visual information can be misleading.

Conclusion: The navigation system used here facilitated revision TKA.

Introduction: Preoperative use of tomodensitometry is a common practice when assessing fractures with intraarticular involvement, helping to determine the most appropriate surgical approach according to the lesions observed. To date, during the surgical procedure itself, radiographical or fluoroscopic controls still largely rely on two dimensions X rays. We assessed the possible benefits of intraoperative tridimensional reconstructions using mobile isocentric fluoroscopy (iso-C-3D) after one year of use.

Material and Methods: All the procedures where intra-operative tridimensional fluoroscopy was used were assessed prospectively for one year. The type of osteosynthesis as well as specific modalities of installation and therapeutic measures driven from analysis of the images were analyzed.

Results: During the first year of use, intraoperative tridimensional reconstruction had been carried out in 48 procedures in 47 patients. The region involved was calcaneus 13 times, thoracolumbar spine 12 times, acetabulum 11 times, tibial condyles 9 times, axis 2 times and pelvis one time. Installation was the same than usually performed in the cases of calcaneus and axis osteosynthesis. For the other localisations, obtention of good quality images was facilitated through the use of a carbon table for spine and osteosynthesis of the tibial condyles, and through the use of a carbon traction table for acetabular or pelvic fractures. Intraoperative tridimensional reconstruction allowed to check for freedom of the vertebral canal after reduction and osteosynthesis of the spine. in the cases of fracture of the calcaneus, reduction of one thalamic fragment was improved in one case and one intraarticular screw could be changed in another case. In the case of acetabular surgery, one screw stabilizing the posterior wall was found intraarticular on tridimensional reconstruction and could be changed before closure.

Discussion: Intraoperative tridimensional reconstruction, during its first year of use, allowed to avoid 3 early reinterventions (for 2 calcaneus and one acetabulum). Accurate interpretation of standard plain X ray in these two localizations is difficult because of the spherical shape of the hip joint and because good quality imaging, especially the retrotibial view, is hardly obtained intraoperatively in fractures of the cacaneus. When using tridemensional reconstructions, acquisition of good quality images has to be anticipated during the installation of the patient, limiting any interfereces with metallic supports to a minimum.

Conclusion: the results obtained over the first year of use of intraoperative tridimensional reconstructions with the ISO-C-3D encouraged the authors to generalize its use when performing osteosynthesis of the acetabulum or calcaneus as well as percutaneus osteosynthesis of articular fractures.

Objective: This study compares the results obtained from arthrolysis of the elbow performed arthroscopically with those done open.

Material and Methods: 139 patients from 3 hospitals, who had undergone an arthrolysis of their elbow, were studied retrospectively. 58 had an arthroscopic arthrolysis and 81 were open. The patients included were aged between 18 and 65, had a loss of passive range of motion, due to either osteoarthritis or post trauma. Patients with previous extra articular osteotomy, septic or inflammatory synovitis were excluded. The clinical evaluation comprised measuring their: range of motion, pain, level of activities, presence of effusion or locking. The images obtained were standard radiographs, CT scan and bone scans to allow us to accurately determine the presence of loose bodies, fibrous tissue in the fossae, the presence of osteophytes or arthritis. All data was recorded in preoperative, postoperative and final assessment.

This study also discusses various issues regarding operative techniques (surgical approaches, debridement of joint and capsular releases).

Results: The two groups were similar on all points with the exception of their aetiologies. There was no clinical difference preoperatively. The arthroscopy was performed through 4 portals in 94% of cases; in the open cases the most common approach was lateral (53%). Intra operatively the significant differences were the removal of posterior osteophytes and capsular releases (p< 0.001) were performed more frequently in the open procedure. At the end of the procedure, the flexion and the gain in flexion-extension range was greater in the arthrotomy group; however the arthroscopic group lost less motion from end of procedure to the final result (8 versus 17 degrees). At the last review, the gain in range of motion remained greater in the group with the open arthrotomy. The number of complications in the 2 groups was identical, though the location of any nerve injury was different. The method of rehabilitation was the same; however this was continued for longer in the arthroscopic group. Final radiographic assessment showed that a less extensive debridement of bone was achieved arthroscopically.

Conclusion: A more extensive release and an easier intra operative evaluation resulting in a better improvement in range of motion at the end of procedure are achieved with arthrotomy. The subsequent loss of motion is more significant in this group however the final outcome showed the gain in range of motion remained greater. It was noted however, that even with less improvement in mobility, with either technique, the patients were equally satisfied.

Purpose of the study: This retrospective study was conducted to analyze the mid-term effect of damage to the anteroinferior rim of the glenoid cavity in failed arthroscopic stabilization of the shoulder.

Material and methods: From 1999 to 2001, 54 patients underwent surgery performed by the same operator. Full data were available for analysis for 46 patients. Mean age was 28 years and mean follow-up four years. A pre-operative scan was available for all patients to analyze the bone lesions. The same technique was used for all shoulders: three or four suture points using resorbable thread attached to a Panolok anchor with a north-south retension effect. The Duplay score was noted at last follow-up. Experimental work by Gerber, which demonstrated that the anti-dislocation resistance decreased as a function of the ratio (x) between the length of the anteroinferior glenoid defect and its maximal antero-posterior diameter, was used to assess resistance to dislocation. This resistance decreased 30% when x=0.5 and 50% when x=0.75.

Results: The Duplay score at 47 months was 83.3. The rate of recurrence was 13% (n=6). Age, sex, and number of episodes of instability had little effect on outcome. The rate of recurrence (38%) in patients with a significant damage (x> 0.5) was much higher than in patients with minimal damage (x< 0.5) (2.2%). The difference was statistically significant (p< 0.01). The Duplay score (63.8 points) in patients with significant damage (x> 0.5) was significantly lower (p=0.01) than in patients (91 points) with minimal damage (x< 0.05).

Discussion: The presence of bony lesions of the anterior glenoid rim appears to be one of the most important prognostic factors of recurrence. Considering the high frequency of these lesions in our series (54%), this element deserves careful analysis which would require computed tomographic reconstruction in the sagittal plane to obtain a precise assessment of the loss of articular surface. The statistical analysis demonstrated that patients with important loss of articular surface (x> 0.5) had a significantly higher risk of recurrent instability (p< 0.01).

Conclusion: Arthroscopic stabilization of the shoulder joint yields results similar to those obtained with more conventional techniques. Our study confirmed this notion showing a rate of recurrence of 13% which could be reduced to less than 3% with careful preoperative assessment of glenoid articular surface loss on the preoperative scan.

Purpose: We compared three fixation systems for proximal fractures of the humerus to elaborate a rigid extra-medullary implant: the basket plate. This novel implant allows fixation of the tubercles with a claw system associated or not with a central cephalic locking screw. The objectives of this study were: check the resistance of the prototype, evaluate the contributions of the claws, and the usefulness of locking.

Material and methods: This was a prototype experimental study comparing a commonly used implant (Maconor2 plate) with the new implant using two series of static mechanical tests (Instrum). The tests were performed on 20 DMO-frozen anatomic specimens using the four-fragment fracture model. An implant was assigned to five groups of randomly selected specimens. The first tests (three groups) were axial compression tests mimicking abduction in the plane of the scaphoid. We analysed the overall mechanical behaviour of the implant and evaluated the locking system. The second tests (two groups) were traction tests. We analysed the behaviour of the fixed tuberosities. The mechanical resistance of the assemblies was noted as the limit load on the force: deformation curve and as the rigidity of the slope.

Results: The first tests showed that the implant was improved by the locking system and had better overall mechanical characteristics than the compared implant, although the difference was not statistically significant. The better hold in the tubercles provided by the claws was expected after the first tests and confirmed by the second tests, but the difference was not significant.

Discussion: The prototype improved with the locking system presented mechanical resistance equivalent to the compared model. The usefulness of locking could not be demonstrated but was considered to improve tolerance to loading by better force distribution. The contribution of the claws was not demonstrated statistically although the results are in line with early hopes. The present findings and data in the literature on shoulder biomechanics suggest that the tests should be conducted on a larger number of specimens to demonstrate a statistically significant difference. The tested series was too small.

Conclusion: Comparison of mechanical resistance with theoretical data on forces applied to the proximal humerus show that the prototype is well adapted, allowing immediate postoperative motion. A prospective study is currently being conducted in our unit.

Purpose: Femoral revision can be difficult when associated with important loss of bone stock and femoral deformation, particularly when the deformation prevents using a long prosthesis despite major loss where it would be useful. We describe a novel technique allowing a simultaneous solution to these two problems and report preliminary results in five patients.

Material and methods: The technique was applied in five patients. Briefly, one or several osteotomies at different levels were performed to correct the deformation in one or more planes, and fixed with a locked femoral implant. Femorotomy was associated in four patients to facilitate removal of prior implants and constituted one of the correction osteotomies. In one patient, non-union of the greater trochanter was treated with a plated autograft. The series included three men and one woman, mean age 72 years (65–83). According to the SOFCOT score, femoral bone loss was grade II in four patients and grade III in one. All femurs had varus deformation (mean 21°, range 16°–40°), and two femurs exhibited permanent flexion (40° and 45°). One shaft osteotomy was used in four patients and two osteotomies in one. The locked femoral implant measured 250 mm in three and 300 mm in two.

Results: Mean follow-up was 3.5 years (0.5–5). One patient committed suicide at six months. The mean Postel Merle d’Aubigné score improved from 9.4 (7–11) to 16.4 (15–18). The trochanter non-union and all osteotomies head at three to four months except one case of shaft non-union which was well tolerated (PMA=16, in a patient without femorotomy who did not require recalibration of the proximal femur). In these healed cases, remodelling and/or spontaneous reconstruction of the femur was observed without grafting for the shaft. There was no stress shielding aspect in the patients with the longest follow-up although they had non-cemented stems with distal locking and no surface treatment.

Conclusion: The technique proposed for this specific indication enables resolution of the double problem of fixation and correction of deformation while allowing spontaneous reconstruction around the non-cemented locked implant. Use of femorotomy is recommended to allow recalibration and stabilisation of the proximal femur around the stem. Longer follow-up is needed to ascertain longevity of the spontaneous reconstruction. Nevertheless, these non-reintegrated implants behave like locked centromedullary nailing.

Purpose: Suture anchors used for reinserting soft tissue on bony structures have been studied with the purpose of evaluating hold in bone. There has not however been any work on the influence of the eye design on suture resistance. The purpose of this work was to examine this aspect of the question.

Material and methods: The following anchors were tested: Statak 4 (Zimmer, Warsaw, IN, USA), Corkscrew 3.5, Fastak 2.4 (Arthrex, Naples, FL, USA), PeBA C 6.5 (OBL, Scottsdale, AZ, USA), Mitek GII 5Mitek, Norwood, MA, USA), Harpoon 2 (Arthrotek, Warsaw, IN? USA), Ultrafix (Linvatec, Largo, FL, USA), Vitis 3.5 AND 5 (Tornier, St Isnier, France). The following suture threads were used: Vicryl dec 5, Flexidene dec 5, PDS dec 4. Three types of tests were performed on an Instron 8500+. To study loading at thread rupture, a loop with a constant length was placed under traction in the axis of the anchor until thread rupture. Two measurement modalities were used. For the first, static tension was applied to increase the linear load at the rate of 1.25 mm/s. In the second, cyclic traction applied tension five times at a frequency of 1 Hz with 10N loading increments. To study thread weakening in relation to each anchor, we imposed a back and forth movement on the strand running through the eye using a sinusoidal 10 mm movement at a frequency of 0.03 Hz, one end of the thread being fixed and the other supporting a constant 20 N load. Each thread was tested in each anchor and each type of test was run three times.

Results: Load at rupture of each thread was not affected significantly by the design of the anchor eyes. Rupture generally occurred at the knot level, sometimes at the eye (Harpoon, Fastak, Vitis) for the Flexidene dec 5 thread. Conversely, there were important differences in the thread weakness tests: a knitted thread such as Vicryl was much stronger than the two other threads tested, irrespective of the anchor. Furthermore, resistance for the dynamic test was very variable for the different anchors: 100±20 cycles for corkscrew 3.5 and 3±1 cycles for Vitis 3.5 with Vicryl or 6+/1 cycles for Harpoon 2 with Flexidene.

Conclusion: The design and finishing of each eye had an effect on the resistance of thread moving through the eye. For anchors which weakened thread after a few back and forth movements, it can be assumed that simple knotting damages the thread to a point where early failure occurs at reinsertion. The best results were obtained when the anchor eye had a bevelled groove.

Purpose: Removal of intra-articular foreign bodies (FB) constitues a major indication for elbow arthroscopy. The purpose of our study was to evalute our experience with arthroscopic treatment of elbow osteochondromatosis.

Material and methods: Between September 1988 and June 2001 we performed elbow arthroscopy in 25 active patients (15 manual workers, 8 athletes including 2 high-level) who presented intra-articular FB osteochon-dromatosis of the elbow. Male gender predominated (n=22). Mean age at intervention was 42 years (17–68). The right (n=21) and dominant (n=24) side predominated. The mean clinical course before arthroscopy was two years. Seven patients had had upper limb trauma (five with elbow injury) a mean 60 months (6–144) before arthroscopy. Clinical assessment before arthroscopy and at last follow-up (mean follow-up 60 months, 8–138) included pain score (visual analogue scale), the notion of blocking and joint effusion and joint motion, as well as index of functional impairment during occupational and recreational activities and a subjective satisfaction index. Standard x-rays and arthroscan were obtained before arthroscopy to identify and evaluate intra-articular foreign bodies. Cartilage damage and presence of synovial anomalies were evaluated on the preoperative scan and during the intervention. Arthros-copy was performed according to the same procedure in all cases: lateral decubitus, arm cuff, anterior expoloration (anteromedial and anterolateral access). Standard x-rays were also obtained after arthroscopy and at last follow-up.

Results: FB were found and extracted in all cases. Cartilage injury was associated in 14 cases. Synovectomy was performed systematically in case of synovitis, a macroscopic synovial anomaly, or to extract a FB trapped in the synovial (n=18). Osteophytes were shaved in 12 cases. The post-arthroscopic period was uneventful with no complications (vascular, nervous, infectious). Clinical improvement was significant and sustained and the occupational and recreational function indexes improved. The subjective satisfaction index remained high five years after arthroscopy. We did not have any clinical recurence (blockage) or radiographically detectable anomaly at last follow-up. Less favourable results (persistent pain) were obtained in patients who had cartilage injury.

Discussion: Arthroscopy appears to be a safe treatment with long-term efficacy for osteochondromatosis of the elbow. Long-term prognosis is influenced most by presence of cartilage injury.

Purpose of the study: The aim of this work was to report our experience with arthroscopy for the treatment of acetabular labral lesions and identify prognostic factors determining mid- and long-term outcome.

Material and methods: Between August 1991 and December 1997, 12 patients (ten women, two men, mean age 39 years, age range 25–61 years) underwent arthroscopic treatment of an acetabular labrum lesion. All were reviewed at a mean 4 years follow-up (18 months-8 years). Half of the patients (n = 6) had a history of hip surgery: two femoral osteotomies and one acetabular bone block for congenital hip dislocation, two high-energy traumas and one traumatic dislocation. Clinical manifestations including pain (n = 12), a sensation of a snag (n = 10), or blockage (n = 8) had developed over a mean 15 months (2–24 months). Standard x-rays evidenced early signs of degenerative disease in four cases and acetabular dysplasia in four (5° < VCE < 18°), and were normal in four. Arthroscanography was performed in all cases and always evidenced a lesion of the anterior or anterosuperior part of the labrum, generally a fissuration (n = 7). The surgical procedure performed on an orthopedic table with traction on the limb lasted 45 to 75 min for regularization of the degenerated labrum in three patients, resection of the languette in six, the anse de seau in two or the labral notch in one. A short hospitalization (24 to 48 hours) was sufficient with immediate weight bearing with two canes. One patient developed sciatic paresia which regressed in 72 hours with vulvar edema due to excessive peroperative traction.

Results: Besides the labral lesion, the exploration also identified an associated chondral lesion in seven cases (acetabulum in two, femoral head in three, both in two) which had been suspected in six cases from preoperative imaging (osteoarthrosis in four, dysplasia in two) and which affected the final outcome. Four of these patients (osteoarthritis in two and dysplasia in two) worsened clinically and radiographically to the point where a total hip arthroplasty was required in three. Among the three other patients, two had residual pain (osteoarthritis in one and initial x-ray normal in one) with no radiographic deterioration and only one (osteoarthrtis) was totally relieved without any radiographic deterioration at six years follow-up. Among the five patients with no chondral lesions, three (with normal x-rays initially) were pain free at four years follow-up while the two others (dysplasia) had residual pain at two years follow-up with no sign of osteoarthrtis on the latest x-rays.

Discussion: Lesions of the acetabular labrum are uncommon but can be treated arthroscopically. Resection of the labral lesion is immediately effective but does not prevent long-term degradation of the joint if there is an associated chondral lesion.

Purpose: There is still debate on classification, pathogenesis, and treatment of partial non-full thickness tears of the rotator cuff. We assessed mid-term outcome after arthroscopic repair.

Material and methods: Between 1990 and 1998, 208 partial tears of the rotator cuffs were treated in our unit. Eighty patients were reviewed by an examiner different and independent from the surgery team. The review included a physical examination, Constant score and radiography. The series included 42 men and 38 women, mean age 52 years (23–73) who were seen at a mean follow-up of 59 months (17–118). We identified four groups: group 1 included lesions of the deep articular aspect of the supraspinatus: 34 cases; group 2 included tears of the superficial aspect: 27 cases; group 3 included tears involving both the deep and superficial aspect without full-thickness tear on the preoperative arthrogram; and group 4 included lesions involving a partial tear of the supraspinatus associated with another articular lesion. Acromioplasty was performed in all cases associated with section of the acromiocoracoid ligament.

Results: Absolute Constant score progressed from 53 points preoperatively to 80 points at last follow-up. Mean Constant score of the contralateral shoulder was 87 points. There was a significant difference between outcome in the first three groups where the mean age was 50 years and the fourth group (trauma context) where the mean age was 36 years. Constant score was 84.7, 92, 92, and 73 for groups 1, 2, 3 and 4 respectively. There was no statistically significant improvement compared with the preoperative Constant score (67 points). Radiographically, there was no change in the subacromial space. Superficial lesions were more frequently associated with type 3 acromial impingement.

Discussion: Globally, we observed a deterioration of outcome with time compared with the first review, with 76% satisfactory results at five years. The same outcome was obtained with superficial and deep lesions. We are in agreement with others that it is necessary to identify a subgroup of patients under 40 years of age with a partial tear of the rotator cuff in a trauma context. For these patients, arthroscopic acromioplasty is not a satisfactory therapeutic approach. The causal lesion (posterosuperior impingement, rim injury or instability) should be treated.