Due to their immunomodulatory and regenerative capacity, human bone marrow-derived mesenchymal stromal cells (hBMSCs) are promising in the treatment of polytrauma patients. However, few studies evaluated the effects of sera from polytraumatized patients on hBMSCs. The aim of this study was to explore changes in hBMSCs exposed to serum from polytrauma patients from different time points after trauma.

Sera from 84 patients on day 1 (D1), 5 (D5) and 10 (D10) after polytrauma (ISS ≥ 16) were pooled respectively to test the differential influence on hBMSC. As a control, sera from three healthy age- and gender-matched donors (HS) were collected. The pooled sera were analyzed by Multicytokine Array for pro-/anti-inflammatory cytokines. For the cell culture experiments, hBMSCs from four healthy donors were used. The influence of the different sera on hBMSC regarding cell proliferation, colony forming unit-fibroblast (CFU-F) assay, cell viability and toxicity, cell migration, as well as osteogenic and chondrogenic differentiation was analyzed. One-Way-ANOVA and LSD-test were used for the parametric, Kruskal-Wallis-test for non-parametric data. p≤0.05 was considered as statistically significant.

The results showed that D5 serum reduced hBMSCs cell proliferation capacity by 41.26% (p=0.000) compared with HS and increased the proportion of dead cells by 3.19% (p=0.008) and 2.25% (p=0.020) compared with D1 and D10. The frequency of CFU-F was reduced by 49.08% (p=0.041) in D5 and 53.99% (p=0.027) in D10 compared with HS, whereas the other parameters were not influenced.

The serological effect of polytrauma on hBMSCs was related to the time after trauma. It is disadvantageous to use BMSCs in polytraumatized patients five days after the incidence as obvious cytological changes could be found at that time point. However, it is promising to use hBMSCs to treat polytrauma after 10 days, combined with the concept of “Damage Control Orthopaedics” (DCO).

Introduction and Objective

In multiple trauma patients, as well as in the healing of isolated fractures (Fx) with heavy bleeding (trauma haemorrhage, TH), complications occur very often. This is particularly evident in elderly patients over 65 years of age. Since these accompanying circumstances strongly influence the clinical course of treatment, the influence of age on bone regeneration after femoral fracture and severe blood loss was investigated in this study.

Aims

This study aimed to analyze the correlation between transverse process (TP) fractures of the fourth (L4) and fifth (L5) lumbar vertebrae and biomechanical and haemodynamic stability in patients with a pelvic ring injury, since previous data are inconsistent.

Purpose

In patients with multiple trauma delayed fracture healing is often diagnosed, but the pathomechanisms are not well known yet. The purpose of the study is to evaluate the effect of a severe hemorrhagic shock on fracture healing in a murine model.

Introduction

Human bone marrow-derived mesenchymal stem cells (hBMSCs) can adopt either an immune suppressive or stimulative phenotype in response to cytokines and pathogen-associated molecular patterns (PAMPs). It is known that the glycoprotein CD24 allows for the discrimination between PAMPs and DAMPs in dendritic cells. We were able to show previously that CD24 is expressed by hBMSCs and found that its overexpression leads to the downregulation of NF-kB-regulated genes, as well as induction of the anti-inflammatory TGF beta.

In the present study the influence of various PAMPs and cytokines on the expression of CD24 in hBMSCs was analysed. Furthermore, it was tested whether in vivo-CD24-positive (CD24+) and in vivo-CD24-negative (CD24-) hBMSCs differ in regard to classical hBMSC or immune-associated surface antigens.

Objectives

The aims of this study were to determine whether the administration of anti-inflammatory and antifibrotic agents affect the proliferation, viability, and expression of markers involved in the fibrotic development of the fibroblasts obtained from arthrofibrotic tissue in vitro, and to evaluate the effect of the agents on arthrofibrosis prevention in vivo.

INTRODUCTION

To test whether there are differences in postoperative mechanical and component alignment, and in functional results, between conventional, navigated and patient-specific total knee arthroplasties in a low-volume centre?

Introduction

High tibial osteotomy (HTO) is a commonly used surgical technique for treating moderate osteoarthritis (OA) of the medial compartment of the knee by shifting the center of force towards the lateral compartment. The amount of alignment correction to be performed is usually calculated prior to surgery and it's based on the patient's lower limb alignment using long-leg radiographs. While the procedure is generally effective at relieving symptoms, an accurate estimation of change in intraarticular contact pressures and contact surface area has not been developed. Using electromyography (EMG), Meyer et al. attempted to predict intraarticular contact pressures during gait patterns in a patient who had received a cruciate retaining force-measuring tibial prosthesis. Lundberg et al. used data from the Third Grand Challenge Competition to improve contact force predictions in total knee replacement. Mina et al. performed high tibial osteotomy on eight human cadaveric knees with osteochondral defects in the medial compartment. They determined that complete unloading of the medial compartment occurred at between 6° and 10° of valgus, and that contact pressure was similarly distributed between the medial and lateral compartments at alignments of 0° to 4° of valgus. In the current study, we hypothesised that it would be possible to predict the change in intra-articular pressures based on extra-articular data acquisition.

Aims

To analyse the influence of upper extremity trauma on the long-term outcome of polytraumatised patients.

Unstable pelvic injuries in young children with an immature pelvis have different modes of failure from those in adolescents and adults. We describe the pathoanatomy of unstable pelvic injuries in these children, and the incidence of associated avulsion of the iliac apophysis and fracture of the ipsilateral fifth lumbar transverse process (L5-TP). We retrospectively reviewed the medical records of 33 children with Tile types B and C pelvic injuries admitted between 2007 and 2014; their mean age was 12.6 years (2 to 18) and 12 had an immature pelvis. Those with an immature pelvis commonly sustained symphyseal injuries anteriorly with diastasis, rather than the fractures of the pubic rami seen in adolescents. Posteriorly, transsacral fractures were more commonly encountered in mature children, whereas sacroiliac dislocations and fracture-dislocations were seen in both age groups. Avulsion of the iliac apophysis was identified in eight children, all of whom had an immature pelvis with an intact ipsilateral L5-TP. Young children with an immature pelvis are more susceptible to pubic symphysis and sacroiliac diastasis, whereas bony failures are more common in adolescents. Unstable pelvic injuries in young children are commonly associated with avulsion of the iliac apophysis, particularly with displaced SI joint dislocation and an intact ipsilateral L5-TP.

Cite this article: Bone Joint J 2015; 97-B:696–704.

The aim of this study was to assess the role of synovial C-reactive protein (CRP) in the diagnosis of chronic periprosthetic hip infection. We prospectively collected synovial fluid from 89 patients undergoing revision hip arthroplasty and measured synovial CRP, serum CRP, erythrocyte sedimentation rate (ESR), synovial white blood cell (WBC) count and synovial percentages of polymorphonuclear neutrophils (PMN). Patients were classified as septic or aseptic by means of clinical, microbiological, serum and synovial fluid findings. The high viscosity of the synovial fluid precluded the analyses in nine patients permitting the results in 80 patients to be studied. There was a significant difference in synovial CRP levels between the septic (n = 21) and the aseptic (n = 59) cohort. According to the receiver operating characteristic curve, a synovial CRP threshold of 2.5 mg/l had a sensitivity of 95.5% and specificity of 93.3%. The area under the curve was 0.96. Compared with serum CRP and ESR, synovial CRP showed a high diagnostic value. According to these preliminary results, synovial CRP may be a useful parameter in diagnosing chronic periprosthetic hip infection.

Cite this article: Bone Joint J 2015; 97-B:173–6.

Purpose

The timing of definitive fixation for major fractures in polytrauma patients is controversial. To clarify this aspect of trauma management, we randomised patients with blunt multiple injuries to either initial definitive stabilisation of the femur shaft with an intramedullary nail or an external fixator which was converted to an intramedullary nail at a secondary procedure and documented the post-operative clinical condition.

We aimed to investigate the treatment and outcome of patients over 65 years of age with tibial Pilon fracture. Patients were treated by primary open reduction and internal fixation or external fixation (EF) as determined by local soft tissue conditions. Patient course, incidence of radiological osteoarthritis and functional outcome using the SF-36 questionnaire were recorded. All patients were evaluated serially until discharge from final follow-up. The mean follow-up time was 28 months (12-45). Statistical analysis was performed using Analyse-it(tm) software for Excel.

In total 25 patients were studied. Two patients died before completion of treatment and were excluded from the final analysis. Therefore, 23 patients (10 male) were included with a mean age of 70.9 years (range 66-89) and a mean ISS of 10.25 (range 9-22). There were 4 grade IIIb open injuries.

Three patients suffered superficial tibial wound infection. Two patients underwent early secondary amputation due to deep bone sepsis within 8 weeks of injury. One patient in the ORIF group underwent primary arthrodesis, which was subsequently revised due to non-union. 3 patients underwent secondary bone grafting to enhance healing, performed at 2, 6 and 9 weeks. 2 patients with metal work failure underwent subsequent revision of ORIF and progressed to union; the mean time to union was 33.8 weeks. At final follow-up 7 (28%) patients had radiological features of osteoarthritis but none had symptoms severe enough to warrant ankle arthrodesis. There were significant differences from the USA norm in physical function score, role physical score, and physical component score, (p< 0.01).

Introduction: Various variants of the extensor indicis (EI) have be described in the literature. We wanted to detect whether there exist any variants of the EI that may cause restricted mobility of the thumb following EI transposition to the extensor pollicis longus (EPL).

Patients & method: Intraoperatively the function of the extensor tendons of 168 hands (98 right / 70 left) of 159 patients (96 female / 63 male) were examined. The function of the muscles was simulated using a tendon-hook. For ethical reasons the approach was not extended for the study.

Results: In 34 of 168 hands 39 accessory tendons were found: 8 were localized between EPL and EI (1 from the EPL to the index; 3 extensor pollicis et indicis; 1 from the EI-muscle to the thumb; 3 to the radial extensor hood of the index). 31 accessory tendon were found ulnar to the EI (2 to the ulnar extensor hood of the index; 25 to the middle finger; 3 to the ring finger; 1 to the little finger). The EI was missing in only one hand, were a strong extensor anularis-tendon was found, which would have been suitable for EPL-reconstruction. 8 of these variants would hinder the thumb from isolated extension following EPL-reconstruction with the EI-tendon.

Conclusion: The extensor tendons should be inspected carefully through EI-transposition for reconstruction of EPL to ensure a free function of the thumb postoperatively. Small accessory tendons that may cause trouble should be cut, strong tendons should be transposed together with the EI-tendon.

Patients with bilateral femur shaft fractures are known to have a higher rate of complications when compared with those who have unilateral fractures. Many contributing factors have been considered responsible, however due to the heterogeneity of the studied populations solid conclusions cannot be substantiated. Patients included in our study were separated according to the presence of a unilateral (group USF) (n=146) versus bilateral femur shaft fracture (group BSF) (n=19)Endpoints of the study included the incidence of systemic (SIRS, Sepsis, Acute Lung Injuries) complications. The perioperative assessment included documentation of clinical and laboratory data assessing blood loss, coagulopathy, wound infection, and pneumonia. Local (wound infection, compartment syndrome etc.) and systemic complications (ALI, MOF, Sepsis) were documented. Statistical analyses were conducted to examine the relation between the occurrence of unilateral versus bilateral femoral fractures and variables indexing patient demographic characteristics and other indicators of initial injury severity. Independent sample t-tests were used to examine treatment group differences for variables that approximated a Gaussian distribution. For non-normal indicators of injury severity Mann-Whitney tests were performed. Pearson chi-square tests were performed for binary indicators of injury severity, except when expected cell counts did not exceed 5 participants. When this occurred, the Fisher exact test was used Evidence indicated that patients who suffered a bilateral femoral fracture were significantly more likely to have hemothorax and receive a blood transfusion upon admission to the hospital in comparison to patients who suffered a unilateral femoral fracture. Bivariate analyses also indicated that patients with bilateral femoral fractures exhibited a longer clinical recovery time and were more likely to experience clinical complications in comparison to those with unilateral fractures. However, there were no significant differences between the fracture groups in terms of the number of hours spent on a ventilator or the occurrence of pneumonia, acute lung injury, acute respiratory distress, sepsis, and multiple organ failure following surgery. Patients in borderline condition spent significantly more time in the ICU in comparison to those in stable condition. The high incidence of posttraumatic complications in poly-trauma patients with bilateral femur shaft fractures is caused by the accompanying injuries rather than by the additional femur fracture itself. It also documents that a thorough preoperative assessment can help differentiate those who have a high like hood of developing systemic complications from those who do not.

Introduction: Intraoperative visualisation of anatomic joint line reduction and hardware placement is techniqually demanding, twodimensional c-arm imaging do not always allow acute decision making about remaining articular steps and hardware misplacement. Postoperatively identification of these failures may need extensive revison surgery and is costly. The new mobile Iso-C3D imaging device provides intraoperative multiplanar reconstructions, consequently immediate decision making becomes possible.

Materials and Methods: 250 different joint fractures were intraoperatively scanned with the Iso-C3D (ankle fractures; forefoot, calcaneus; pilon tibiale; tibia plateaus; wrists; spine; pelvic fractures). Multiplanar reconstructions were obtained from 100 fluoroscopic images the Iso-C-3D provides during one automatic scan protocol. Decisions about remaining articular steps and implant misplacements were compared with the knowledge of conventional c-arm images which were done before. If necessary directly intraoperative corrections were performed.

Results: In 43 clinical cases (17%) a direct intraoperative correction resulted in implant change (8%) or correction of reduction (9%), caused by articular steps > 2mm, screw or k-wire misplacement. In all those cases conventional c-arm images did not reveal the significant step or misplacement, correction decision were all based on the Iso-C3D imaging in those cases. In other (9%) significant steps or misplacements were identified in c-arm images and confirmed with the Iso-C3D images.

Discussion: With the new intraoperative three dimensional imaging device a direct introperative idenfication of remaining intraarticular steps and implant misplacements becomes possible. Missed steps and misplacements can be avoided and reduction of operative revison rates might result.

Introduction: Image based navigation is able to increase precision and reduce intraoperative radiation time in drilling procedures in orthopeadic trauma indications. Due to specific anatomic conditions and necessary adequate fluoroscopic visualizing, specific indications need intraoperative 3-D fluoroscopy based navigation modalities. This kind of navigation has already been successfully used in several orthopaedic interventions. The complex anatomic structure of the scaphoid, the suggested minimal invasiveness and misplacement rates of the screws make 2-D based fluoroscopic navigation impossible. Missing options for a stable reference marker fixation at the scaphoid or carpus did not allow an intraoperative registration for the navigation. We report about the development of an adequate non invasive fixation technique of the reference marker for navigated interventions and the first implementation of 3-D fluoroscopy based scaphoid screws.

Materials and method: Fixation of the reference marker was achieved by immobilisation of the complete hand and forearm in maximum dorsal extension of the wrist. We used a completely new developed radiolucent hand fixation device (HFD) fixed nonivasively to the carpus and a conventional navigation system (Brainlab, Germany) in combination with 3-D fluoroscopic imaging (Iso-C, Siemens, Germany).

Tests were done on 10 intact specimen and the process included the initial drilling and final placement of an osteosynthetic screw. Postoperative placement was controlled with a 3-D scan. Results concerning a defined optimal screw positioning and drill failures attempts were done by another independent surgeon.

Results: All 3-D scans were done without complications. The multiplanar reconstructions allowed a proper visualisation of the scaphoid in all cases. No additional movement of the fixed extremity occurred during the operation. No registration failures were detected. An optimally defined screw placement in the scaphoid was achieved in 9 cases. Two repeated drill attempts were necessary in one case, another case needed three drill attempts. The scaphoid was never perforated.

Discussion: Our development of a new immobilizing device for the complete hand and forearm allows proper use of 3-D fluoroscopy based navigation at the scaphoid including a placement of an osteosynthetic screw. Further movements of the hand or fingers are intraoperatively only possible after the definite drill placement has been performed.

The 3-D imaging modality allows a direct control of the reduction and screw placement intraoperatively. Our tests did not include simulated fracture conditions, a general use of our new technique can now only be implemented to non displaced fracture types, while clinical and further laboratory tests have to improve our findings for all types of scaphoid fractures.

Introduction: The main purpose of this study was to analyze the accuracy of conventional versus navigated open wedge corrective osteotomies of the proximal tibia. Furthermore, the intraoperative radiation dosage and the time of the operative procedure of both groups were compared.

Methods: 20 legs of 11 fresh cadaver (9 male, 2 female, age 35–71 years) were randomly assigned to conventional open wedge high tibial osteotomy (HTO) (n=10) or navigated open wedge HTO (n=10). Two legs had to be excluded because of pre-existing knee injuries. The aim of all corrective operations was to align the mechanical axis to pass through 80% of the tibial plateau (80% Fujisawa line), regardless of the preexisting alignment. The intraoperative mechanical axis was evaluated either by the cable technique for conventional HTO, or by a navigation module for navigated HTO (Medivision, Oberdorf/Switzerland). An angle fixed implant with interlocking screws (Tomofix, Mathys, Bettlach/Switzerland) was used to minimize postoperative loss of correction. Postoperatively, CT-scans were performed and the Fujisawaline and MPTA measured with a computer software for deformity analysis (Med-iCAD) The main outcome parameter was the accuracy of the correction, which was measured by the Fujisawa line. Secondary outcome parameters were the intraoperative radiation measured by the dose area product and the time of the operative procedure. For statistical analysis the standard deviation (S.D.) was calculated and the paired t-test applied.

Results: After conventional HTO, the mechanical axis was intersecting the Fujisawa line at 72.1% of the tibial plateau (range 60.4–82.4%, S.D. 7.2%). In contrast, after navigated HTO the tibia plateau was passed through 79.7% (range 75.5–85.8%, S.D. 3.3%). Thus, the accuracy of the correction was significantly higher after navigated HTO (p=0.020). In addition, the standard deviation of the corrections was significantly lower after navigated HTO (p=0.012). The medial proximal tibia angle (MPTA) increased 7.9° (range: 4.7–12.1°) after conventional HTO and 9.1° (range: 4.6–12.6°) after navigated HTO. The average dose area products of the conventional HTO (49.5 cGy/cm2, range 36.0–81.2 cGy/cm2) and navigated HTO (42.8 cGy/cm2, range 28.3–58.1 cGy/cm2) were comparable (p=0.231). However, navigated HTO elongated the operation time significantly (navigated HTO: 82 min, range 55–98 min; conventional HTO: 59 min, range 47–73 min) (p< 0.001).

Conclusion: Continuous three-dimensional imaging of the axis and of intraoperative tools with the a navigation module significantly improves the accuracy of open wedge osteotomies of the proximal tibia. Prospective clinical studies will show whether the results of this cadaver study can be transferred to the regular clinical use.

Introduction: Movement of the limb during computer aided arthroplasty may cause soft tissue impingement on the reference marker(RM) and consequently alter the spatial relationship between RM and bone with resulting inaccuracies in navigation. The purpose of this study was to investigate the effect of different degrees of soft tissue dissection on the stability of reference markers during limb movement.

Methods: The stability of both one- and two-pin RM systems inserted using three different levels of soft-tissue dissection was analysed in relation to a super-stable RM in fresh cadaver lower limbs. The spatial relationship of the two RMs was analysed using the VectorVision^® system (BrainLAB, Germany) during multiple repetitions of four predefined limb movements. All tests were done with RMs inserted in both the distal-anterior femur and distal-lateral femur.

Results: Analysis of movements of the test RM in relation to the super-stable RM showed that rotations of less than 0.15^o and translations of less than 0.4mm occurred in most test combinations. The combination that showed the greatest instability was when a stab incision was used to insert a pin in the distal/lateral femur (translation 0.73mm+/−0.05, rotation 0.25^o+/− 0.05)(p< 0.001). This instability occurred in both single and double pin RMs(p=0.21).

Conclusions: RM pins can be placed in the anterior distal femur through simple stab incisions without resulting in significant soft tissue impingement during limb movement. If pins are placed in the lateral distal femur through stab incisions, impingement may occur from the fascia lata. Release of the fascia lata 1cm either side of the pin prevents significant impingement. Wide skin incision is unnecessary in any location.

Movement of the limb during computer aided arthroplasty may cause soft tissue impingement on the reference marker(RM) and consequently alter the spatial relationship between RM and bone with resulting inaccuracies in navigation. The purpose of this study was to investigate the effect of different degrees of soft tissue dissection on the stability of reference markers during limb movement.

The stability of both one- and two-pin RM systems inserted using three different levels of soft-tissue dissection was analysed in relation to a super-stable RM in fresh cadaver lower limbs. The spatial relationship of the two RMs was analysed using the VectorVision® system (BrainLAB, Germany) during multiple repetitions of four predefined limb movements. All tests were done with RMs inserted in both the distal-anterior femur and distal-lateral femur.

Analysis of movements of the test RM in relation to the super-stable RM showed that rotations of less than 0.15o and translations of less than 0.4mm occurred in most test combinations. The combination that showed the greatest instability was when a stab incision was used to insert a pin in the distal/lateral femur (translation 0.73mm+/− 0.05, rotation 0.25o+/− 0.05)(p< 0.001). This instability occurred in both single and double pin RMs(p=0.21).

RM pins can be placed in the anterior distal femur through simple stab incisions without resulting in significant soft tissue impingement during limb movement. If pins are placed in the lateral distal femur through stab incisions, impingement may occur from the fascia lata. Release of the fascia lata 1cm either side of the pin prevents significant impingement. Wide skin incision is unnecessary in any location.

In computer assisted orthopaedic surgery, rigid fixation of the Reference Marker (RM) system is essential for reliable computer guidance. A minimum shift of the RM can lead to substantial registration errors and inaccuracies in the navigation process. Various types of RM systems are available but there is little information regarding the relative stabilities of these systems. The aim of this study was to test the rotational stability of three commonly used RM systems.

One hundred and thirty Synbones and 15 cadavers were used to test the rotational stability of three different RM systems (Schanz’ screw, Brain-Lab MIRA and Stryker adjustment system). Using a specially developed testing device, the peak torque sustained by each RM system was assessed in various anatomical sites.

Comparison of means for Synbone showed that the BrainLab MIRATM system was the most stable (mean peak torque 5.60+/− 1.21 Nm) followed by the Stryker systemTM (2.53+/− 0.53 Nm) and the Schanz screw(0.77+/− 0.39 Nm)(p< 0.01). The order of stability in relation to anatomical site was femoral shaft, distal femur, tibial shaft, proximal tibia, anterior superior iliac spine, iliac crest and talus. Results from the cadaver experiments showed similar results. Bi-cortical fixation was superior to mono-cortical fixation in the femur(p< 0.01) but not the tibia(p=0.22).

The RM system is the vital link between bone and computer and as such the stability of the RM is paramount to the accuracy of the navigation process. In choosing RM systems for computer navigated surgery surgeons should be aware of their relative stability. Anatomical site of RM placement also affect the stability. Mono-cortical fixation is generally less stable than bi-cortical.

Introduction: Homogenous cell distribution and suffi-cient initial scaffold stability remain key issues for successful tissue engineered osteochondral constructs. The purpose of this study was to investigate the application of initial compression forces during the first 24 hours of cell culture followed by different stress patterns.

Methods: Bone marrow stromal cells were harvested from the iliac crest during routine trauma surgery. The cells were expanded in a 2-dimensional culture and then seeded into the biologic hybrid scaffold with a concentration of 1x10E6 cells per ml. Pressure and vacuum forces were applied in a specially developed glass kit. The constructs were exposed to two different protocols of compression combined as oteochondral matrices of CaReS (collagen I) and Tutobone (Ars Arthro, Esslingen, Germany and Tutogen Medical GmbH, Neunkirchen a. Br., Germany). Controls were resected osteochondral fragments from patients with articular fractures and uncompressed constructs. These effects were evaluated using light microscopy after standard staining to identify matrix penetration. Biomechanical tests were conducted, too using a modified biomechanical testing machine. The ‘constrained compression’, maximum load to failure, modulus, and strain energy density were determined.

Results: Histology: Penetration and cell distribution was demonstrated homogenous and vital, respectively. Mechanical tests showed a significant enhancement of primary matrix stability. The following stress patterns did not enhance significantly stability over seven days.

Discussion: The aim of this project was to investigate the response and cell distrubution of human bone marrow stromal cells seeded on a 3-dimensional biologic hybrid scaffold using compression and vacuum forces.

The integration of mechanical stimulation in the tissue engineering process may lead to a progress in the structural and biomechanical properties of these tissues and offers new possibilities in the management of bone injuries and degenerative diseases.

The aim of this pilot study was to evaluate the accuracy of two different methods of navigated retrograde drilling of talar lesions. Artificial osteochondral talar lesions were created in 14 cadaver lower limbs. Two methods of navigated drilling were evaluated by one examiner. Navigated Iso-C^3D was used in seven cadavers and 2D fluoroscopy-based navigation in the remaining seven. Of 14 talar lesions, 12 were successfully targeted by navigated drilling. In both cases of inaccurate targeting the 2D fluoroscopy-based navigation was used, missing lesions by 3 mm and 5 mm, respectively. The mean radiation time was increased using Iso-C^3D navigation (23 s; 22 to 24) compared with 2D fluoroscopy-based navigation (14 s, 11 to 17).

Tibial rotation and translation provide important stability parameters after ACL reconstruction. An accurate tool for a combined pre- intra- and postoperative stability measurement is not in clinical use so far. Navigation of the drill canals for the ACL placement and evaluation of possible impingement problems has been introduced for some years already, while measurement of the tibial translation and rotation is only available for a short time and only available for a few navigation modules. Navigation provides an accuracy of 1mm/1°, therefore navigated measurement of tibial rotation and translation were evaluated in this study with a new developed mechanical device and directly compared to conventional measurement techniques.

Accuracy of navigation was compared with the KT1000 for the anterior-posterior (AP) translation and to a new developed goniometer tool concerning the rotational range of motion. Comparative tests included plastic whole leg models and specimens. Tests were repeated with intact and dissected ACL′s. A conventional navigation system (Vector Vision, Brainlab, Germany) was used in all cases. This included software developed for fluoroscopy based navigated ACL reconstruction. The following knee kinematics were detectable with the navigation system: Flexion/Extension degrees of the knee joint (°); AP translation of the tibia in relation to the femur (mm); Axial tibial rotation relative to the femur (°).

Validation of Navigation: first neutral tibial rotation was defined and marked in the knee joint in neutral position. All rotational measurements were done with a new developed goniometer tool and compared to the navigated technique. Then the knee was rotated externally until 45° (maximum) and internally 45° (maximum), by single 2.5° steps. These measurements were repeated in 0°, 30°, 60° and 80° knee flexion. All tests were repeated three times and performed by 3 different observers. A total of 1296 measurements were done. Measurements of the tibial translation were compared with the KT 1000 for the specimen testing.

Results revealed: accurate navigated measurement of tibial rotation in plastic and specimen models; variation of absolute AP translation values between KT1000 and navigation; variation of the AP translation corresponding to the ACL condition; increased range of total tibial rotation after dissecting the ACL compared to the intact ligament.

Restoration of the rotational stability and limiting of the AP translation is necessary to provide normal knee kinematics after ACL reconstructions. Intraoperative measurements of these stability parameters are demanding and so far not established with navigation systems or conventionally. As our results show, navigation offers an accurate technique for measurement of the AP translation and rotation of the knee with intact and dissected ACL’s under laboratory conditions. General use in the evaluation of a successful ACL reconstruction becomes possible intraoperative and might be reproducible for further measurements. Clinical studies are needed to improve our results.

Anatomic reduction and appropriate implant placement is essential for optimal treatment of intraarticular tibial plateau fractures. Standard intraoperative fluoroscopy provides limited visualization of the reduction and hardware placement compared with pre- or postoperative 3-D imaging modalities. As such, post-operative computer tomography (CT) has become a common procedure to evaluate the quality of the reduction and fixation. The Iso-C3D provides 3-D intraoperatively imaging to dynamically assess the surgical reduction and fixation at different anatomic regions. We report on our first 19 clinical tibial plateau fractures scanned intra-operatively with the Iso-C 3D.

Between January and November 2003, 19 intraarticular tibia plateau fractures were scanned intraoperatively with the Iso-C3D (Siemens, Germany). No formal selection criteria were utilised except for the presence of a tibial plateau fracture. Operative procedures included 14 cases of open reduction internal fixation and 5 cases of internal fixation with arthroscopic assisted reduction.

Imaging Technique: All patients were positioned on full-carbon tables for the operative procedure. After initial operative reduction and fixation, conventional two-dimensional fluoroscopic imaging was performed using standard AP and lateral projections. These images were evaluated by the operating surgeon; if the reduction and fixation was judged to be appropriate, Iso-C3D imaging was initiated

In 21% (n=4) of all cases an immediate revision of the operative procedure was performed after Iso-C3D imaging. These revisions were not deemed necessary with conventional fluoroscopy alone. In two cases, significant intra-articular incongruencies (greater than two millimetres) were noted. Additionally, in two cases, implant mal-position was detected. All patients had a postoperative CT scan. All CT scans confirmed the intraoperative Iso-C imaging, no further additional articular incongruencies or malpositioned implants were identified. When compared to conventional C-arm images, the Iso-C 3D scans demonstrated improved ability to identify the articular malreduction and implant mal-position in all cases.

We have demonstrated that the Iso-C3D provides reliable intraoperative evaluation of reduction and hardware placement compared to traditional CT scans for tibial plateau fractures. In addition, clinically relevant intra-operative information was gained with its use in this study. In four (21%) cases, the operative treatment was modified due to the use of the multiplanar imaging modality. On average, 10 minutes of additional operative time was required for the use of Iso-C3D scanning and the evaluation of the images. Further prospective clinical studies are needed to improve our findings.

Different calcaneal plates with locked screws were compared in an experimental model of a calcaneal fracture. Four plate models were tested, three with uniaxially-locked screws (Synthes, Newdeal, Darco), and one with polyaxially-locked screws (90° ± 15°) (Rimbus). Synthetic calcanei were osteotomised to create a fracture model and then fixed with the plates and screws. Seven specimens for each plate model were subjected to cyclic loading (preload 20 N, 1000 cycles at 800 N, 0.75 mm/s), and load to failure (0.75 mm/s).

During cyclic loading, the plate with polyaxially-locked screws (Rimbus) showed significantly lower displacement in the primary loading direction than the plates with uniaxially-locked screws (mean values of maximum displacement during cyclic loading: Rimbus, 3.13 mm (sd 0.68); Synthes, 3.46 mm (sd 1.25); Darco, 4.48 mm (sd 3.17); Newdeal, 5.02 mm (sd 3.79); one-way analysis of variance, p < 0.001).

The increased stability of a plate with polyaxially-locked screws demonstrated during cyclic loading compared with plates with uniaxially-locked screws may be beneficial for clinical use.

For femoral shaft fracture, damage control orthopaedics entails primary external fixation and subsequent conversion to an intramedullary device (IMN). Sub-clinical contamination of external fixator pin sites is common and it is argued that such an approach risks subsequent local infective complications. We aimed to determine the rate of wound infection following DCO procedures and primary IMN for femoral fracture stabilisation.

Retrospective analysis of a prospectively assembled adult patient database was carried out. Inclusion criteria were femoral #, New Injury Severity Score (NISS) above 20 and survival more than 2 weeks. Two groups, damage control (DCO) and early total care (ETC) (Primary Nail), were formed. Contamination was positive culture from the wound or fixator pin-sites without clinical infection. Superficial infection was a combination of positive bacterial swabs and local or systemic signs of infection. Deep infection was any case requiring surgical intervention with a sub-group requiring removal of femoral metal work (ROMW) also defined.

173 patients met the criteria for inclusion, with 192 fractures (19 bilateral). The mean follow up was 19 months. Patients in the damage control group were more severely injured than those undergoing primary intramedullary nailing (NISS 36 vs 25, p 0.001). There were also more severe (Grade 3 A,B or C) local soft tissue injuries in this group (p 0.05). 98 of the 111 DCO patients underwent subsequent IMN. Others either died without conversion being appropriate, or it was elected to complete treatment with external fixation. The mean time of exchange an ex/fix to a nail was 14.1 days.

Though contamination rates were higher in the DCO group (12.6% vs 3.7%, p 0.05), there was no excess of infective complications (11.1% vs 10.8%). Contamination increased significantly in patients who underwent conversion to IMN after 14 days. Grade 3 open injury was significantly associated with infection irrespective of treatment.

This study demonstrates that infection rates following DCO for femoral fractures are not significantly different to those observed following primary intramedullary nailing. Whilst the overall risk of deep infection in the DCO group did not show any correlation with the timing of converting the external fixator to a nail, the risk of contamination was higher in patients where the exchange nailing was performed after a period of 2 weeks.

Background /Methods: Abbreviated Injury Scale based systems; the ISS, NISS, and AISmax, are used to assess trauma patients. The merits of each in predicting outcome are controversial. A large prospective database was used to assess their predictive capacity using receiver operator characteristic curves.

Results: 13,301 adult patients met the inclusion criteria. All systems were significant outcome predictors for sepsis, multiple organ failure (MOF), length of hospital stay, length of ICU admission and mortality (p 0.0001). NISS was a significantly better predictor than the ISS for mortality (p 0.0001). NISS was equivalent to the AISmax for mortality prediction and superior in patients with orthopaedic injuries. NISS was significantly better for sepsis, MOF, ICU stay and total hospital stay (p 0.0001). Analysis of the ROC curves revealed that the traditional ISS cut-offs for severity of 16, 25 and 50 should be increased to 20, 30 and 55 to provide patients with equivalent outcome.

Conclusions: NISS is superior or equivalent to the ISS and AISmax for prediction of all investigated outcomes in a population of blunt trauma patients. As NISS is easier to calculate, its use is recommended to stratify patients for clinical and research purposes.

Introduction Correct postoperative leg alignment and stability of total knee prothesis over the full range of movement is one critical factor for successful TKA. This can only be achieved by correct implantation of prothesis and soft tissue handling. Still arthrotomy, surgical approach and handling of patella are discussed controversially.

Materials and Methods In a cadaver specimen study we evaluated the influence of everted or subluxated patella on limb axis during balancing of the knee in three different standard surgical approaches. For each approach we operated five knees. Leg alignment was visualised by Ci CT-free DePuy/BrainLAB navigation system. First, physiological leg alignment was measured. Then the different approaches were performed and a.p. leg axis was first measured and compared as well with everted as with subluxed patella in extension and second in 90 degrees flexion.

Results Eversion of patella leads to an alteration in leg axis compared to subluxed patella of 0.58 degrees (SD: 0.03, range: 0.54–0.6) limb axis in valgus direction in full extension. In 90 degrees flexion we found a mean deviation of leg axis of 0.48 degrees (SD: 0.11, range: 0.38–0.6) with everted patella compared to subluxed patella.

Discussion The surgeon has to be aware of this falsifying influence of everted patella to the a.p. limb axis.

Purpose: Intravasation of intramedullary contents and immune activation under the stimulus of cytokines and other inflammatory mediators released during canal preparation are presumed to be significant factors in the evolution of acute lung injury following stabilization of femoral shaft fractures with intramedullary nailing.

We aimed to quantify the development of acute endo-thelial permeability changes (within 4hours from canal instrumentation) with the reamed (RFN) and unreamed (UFN) nailing technique and assess the effect of coexisting lung contusion.

Materials and methods: A standardized sheep model (n=8 animals/group) was used. In the control groups, a thoracotomy without lung injury was performed prior to canal instrumentation. In the study groups a lung contusion of the right middle and lower lobe was induced. Osteosynthesis of the femur was carried out by the reamed (group RFN; standard Synthes reamer, old version) and unreamed technique (group UFN). Bronchoalveolar lavage was performed in order to assess the extent of lung parenchymal damage (permeability). The amount of protein leakage (determination of protein (Lowry assay) and urea (biochemical test) in BALF and serum) at different time points was analysed. Polymorphonuclear leukocyte activation was quantified by chemi-luminescence. IL-8 and coagulatory disturbances (Protein C) were also measured. All animals were sacrificed four hours following canal instrumentation and histological analysis was performed.

Results: In the control groups both the reamed and the unreamed nailing techniques were associated with a significant increase in pulmonary permeability compared to baseline values, p< 0.05. The experimental lung contusion induced prior to canal instrumentation caused also a significant increase in pulmonary permeability compared to baseline values. However, the subsequent canal instrumentation amplified further, significantly so, the degree of pulmonary permeability only in the reamed group (RFN).Both the activation of leukocytes and IL-8 release were also significantly raised following lung contusion and reamed femoral nailing compared to the UFN group with lung contusion (data not shown). Histological analysis illustrated the presence of fat globules in the pulmonary vasculature.

Conclusion: In a standardised sheep model without chest injury, instrumentation of the femoral canal with the reamed and the unreamed nailing techniques induced a rise in pulmonary permeability changes. In the presence of lung contusion, reamed intramedullary femoral nailing provoked a further increase in pulmonary permeability damage, IL-8 release and leukocyte activation. The findings of this study support the view that reaming of the femoral canal can act as an additional stimulus for adverse outcome in the presence of co-existing chest trauma.

We describe the results after open reduction and internal fixation of 22 consecutive displaced fractures of the glenoid with a mean follow-up of ten years. A posterior approach was used in 16 patients and an anterior in six, the approach being chosen according to the Ideberg classification of the fractures. The fixation failed in two patients, one of whom required a further operation. There were two cases of deep infection.

At follow-up the median Constant score was 94% (mean 79%, range 17 to 100). The score was less than 50% in four patients, including the two who became infected. A further two had an associated complete palsy of the brachial plexus.

Intramedullary nailing of metaphyseal fractures may be associated with deformity as a result of instability after fixation. Our aim was to evaluate the clinical use of Poller screws (blocking screws) as a supplement to stability after fixation with statically locked intramedullary nails of small diameter.

We studied, prospectively, 21 tibial fractures, 10 in the proximal third and 11 in the distal third in 20 patients after the insertion of Poller screws over a mean period of 18.5 months (12 to 29).

All fractures had united. Healing was evident radiologically at a mean of 5.4 ± 2.1 months (3 to 12) with a mean varus-valgus alignment of −1.0° (−5 to 3) and mean antecurvatum-recurvatum alignment of 1.6° (−6 to 11). The mean loss of reduction between placement of the initial Poller screw and follow-up was 0.5° in the frontal plane and 0.4° in the sagittal plane. There were no complications related to the Poller screw.

The clinical outcome, according to the Karström-Olerud score, was not influenced by previous or concomitant injuries in 18 patients and was judged as excellent in three (17%), good in seven (39%), satisfactory in six (33%), fair in one (6%), and poor in one (6%).

Rotational deformity following intramedullary nailing may cause symptoms and require surgical correction by osteotomy. Reamed, locked intramedullary nailing may be performed, but concern about cortical blood supply and potential pulmonary dysfunction from reaming have led many surgeons to limit this and use smaller diameter nails. Slotted nails are commonly used but are less stiff in torsion than the newer unslotted nails, particularly at the lower diameters.

We report two cased of recurrent femoral rotational deformity after using statically interlocked slotted intramedullary nails to correct existing femoral rotational deformities. These patients show that small diameter statically interlocked femoral nails with diminished bone-nail contact must be stiff enough in rotation to avoid potential recurrence.

The accuracy of templates used for the preoperative planning of the fixation of intramedullary fractures depends on radiological magnification. To study the accuracy of these templates, we randomly selected 100 femoral and 100 tibial radiographs taken after stabilisation by an intramedullary nail using a standard technique. We then compared the known nail length with the corresponding measurements on the radiographs.

The mean magnification factor for the femur was 9% and for the tibia 7%; these differ considerably from the range of magnification of the manufacturers’ templates (femur, 15% to 17%; tibia 10% to 15%). We conclude that templates are unreliable for the selection of implant length and that this should be done by intraoperative measurements.