For clinical movement analysis, optical marker-based motion capture is the gold standard.

With the advancement of AI-driven computer vision, markerless motion capture (MMC) has emerged. Validity against the marker-based standard has only been examined for lightly-dressed subjects as required for marker placement. This pilot study investigates how different clothing affects the measurement of typical gait metrics.

Gait tests at self-selected speed (4 km/h) were performed on a treadmill (Motek Grail), captured by 9 cameras (Qualisys Miqus, 720p, f=100Hz) and analyzed by a leading MMC application (Theia, Canada). A healthy subject (female, h=164cm, m=54kg) donned clothes between trials starting from lightly dressed (LD: bicycle tight, short-sleeved shirt), adding a short skirt (SS: hip occlusion) or a midi-skirt (MS: partial knee occlusion) or street wear (SW: jeans covering ankle, long-sleeved blouse), the lattern combined with a short jacket (SWJ) or a long coat (SWC). Gait parameters (mean±SD, t=10s) calculated (left leg, mid-stance) were ankle pronation (AP-M), knee flexion (KF-M), pelvic obliquity (PO-M) and trunk lateral lean (TL-M) representing clinically common metrics, different joints and anatomic planes. Four repetitions of the base style (LD) were compared to states of increased garment coverage using the t-test (Bonferroni correction).

For most gait metrics, differences between the light dress (LD) and various clothing styles were absent (p>0.0175), small (< 2SD) or below the minimal clinically important differences (MCID). For instance, KF-M was for LD=10.5°±1.7 versus MD=12.0°±0.5 (p=0.07) despite partial knee cover. AP-M measured for LD=5.2°±0.6 versus SW=4.1°±0.7 (p<0.01) despite ankle cover-up. The difference for KF-M between LD=10.5°±1.7 versus SWL=6.0°±0.9, SW and SWJ (7.6°±1.5, p<0.01) indicates more intra-subject gait variability than clothing effect.

This study suggests that typical clothings styles only have a small clinically possibly negligible effect on common gait parameters measured with MMC. Thus, patients may not need to change clothes or be instructed to wear specific garments. In addition to avoiding marker placement, this further increases speed, ease and economy of clinical gait analysis with MMC facilitating high volume or routine application.

Introduction and Objective

An important subset of patients is dissatisfied after total joint arthroplasty (TJA) due to residual functional impairment. This study investigated the assessment of objectively measured step-up performance following TJA, to identify patients with poor functional improvement after surgery, and to predict residual functional impairment during early postoperative rehabilitation. Secondary, longitudinal changes of block step-up (BS) transfers were compared with functional changes of subjective patient reported outcome measures (PROMs) following TJA.

Hip resurfacing arthroplasty (HRA) became a popular procedure in the early 90s because of the improved wear characteristic, preserving nature of the procedure and the optimal stability and range of motion. Concerns raised since 2004 when metal ions were seen in blood and urine of patients with a MoM implant. Design of the prosthesis, acetabular component malpositioning, contact-patch-to-rim distance (CPR) and a reduced joint size all seem to play a role in elevated metal ion concentrations. Little is known about the influence of physical activity (PA) on metal ion concentrations. Implant wear is thought to be a function of use and thus of patient activity levels. Wear of polyethylene acetabular bearings was positively correlated with patient's activity in previous studies. It is hypothesized that daily habitual physical activity of patients with a unilateral resurfacing prosthesis, measured by an activity monitor, is associated with habitual physical activity.

A prospective, explorative study was conducted. Only patients with a unilateral hip resurfacing prosthesis and a follow-up of 10 ± 1 years were included. Metal ion concentrations were determined using ICP-MS. Habitual physical activity of subjects was measured in daily living using an acceleration-based activity monitor. Outcome consisted of quantitative and qualitative activity parameters.

In total, 16 patients were included. 12 males (75%) and 4 females (25%) with a median age at surgery of 55.5 ± 9.7 years [43.0 – 67.9] and median follow-up of 9.9 ± 1.0 years [9.1 – 10.9]. The median cobalt and chromium ion concentrations were 25 ± 13 and 38 ± 28 nmol/L. A significant relationship, when adjusting for age at surgery, BMI, cup size and cup inclination, between sit-stand transfers (p = .034) and high intensity peaks (p = .001) with cobalt ion concentrations were found (linear regression analysis).

This study showed that a high number of sit-stand transfers and a high number of high intensity peaks is significantly correlated with high metal ion concentrations, but results should be interpreted with care. For patients it seems save to engage in activities with low intensity peaks like walking or cycling without triggering critical wear or metal ions being able to achieve important general health benefits and quality of life, although the quality (high intensity peaks) of physical activity and behaviour of patients (sit-stand-transfers) seem to influence metal ion concentrations.

An increase in metal ion levels is seen after implantation of all MoM hip prosthesis due to release from the surface directly, more so during articulation and corrosion of the bearing surfaces. The bearing surfaces in MoM prosthesis consist of cobalt, chromium and molybdenum. Several case-reports of cobalt toxicity due to a MoM prosthesis have been published in the last decade. Cobalt intoxication may lead to a variety of symptoms: neuro-ocular toxicity (tinnitus, vertigo, deafness, blindness, convulsions, headaches and peripheral neuropathy), cardiotoxicity and thyroid toxicity. Nausea, anorexia and unexplained weight loss have been described. Systemic effects from metal ions even with well functioning implants or with ion concentrations lower than those associated with known adverse effects may exist and warrant investigation. The aim of this study is to investigate self-reported systemic complaints in association with cobalt ion concentrations in patients with any type of MoM hip prosthesis. A cohort study was conducted. Patients with both unilateral and bilateral, resurfacing and large head metal on metal total hip arthroplasties were included for the current study. Blood metal ion concentrations (cobalt and chromium) were measured by inductively coupled plasma mass spectrometry (ICP-MS). Based on the known cobalt toxicity symptoms of case-reports and toxicology reports a new non-validated questionnaire was developed. questions were subdivided in general questions/symptoms, vestibular symptoms, neurological symptoms, emotional health and cardio- and thyroid toxicity symptoms. Independent samples T test, Fishers Exact Test and Pearsons (R) correlation were used. Analysis was performed on two groups; a low cobalt ion concentration group and a high cobalt ion concentration group A total of 62 patients, 36 (58%) men and 26 (42%) women, were included with a mean age at surgery of 60.8 ± 9.3 years (41.6 – 78.1) and a mean follow up of 6.3 ± 1.4years (3.7 – 9.6). In these patients a total of 71 prosthesis were implanted: 53 unilateral and 9 bilateral. Of these, 44 were resurfacing and 27 large head metal on metal (LHMoM) total hip arthroplasties. Mean cobalt and chromium ion concentrations were 104 ± 141 nmol/L (9 – 833) and 95 ± 130nmol/L (6 – 592), respectively. Based on the different thresholds (120 – 170 or 220 nmol/L) the low cobalt ion concentration group consisted of 44 (71%), 51 (82%) or 55 (89%) subjects respectively. No differences were found in general characteristics, independently of the threshold. The composite score of vestibular symptoms (vision, hearing, tinnitus, dizziness) was significantly higher (p < .050) in all high cobalt ion concentrations groups, independent of the threshold value This study aimed to detect a trend in self-reported systemic complaints in patients with metal-on-metal hip arthroplasty due to raised cobalt ion concentrations. Vestibular symptoms were more common in high cobalt ion concentration groups independent of the three threshold levels tested. The upper limit of acceptable cobalt ion concentrations remains uncertain. With regards to proactively inquired, self-reported symptoms the threshold where effects may be present could be lower than values currently applied in clinical follow-up. It is unknown what exposure to elevated metal ion concentrations for a longer period of time causes with aging subjects. Further research with a larger cohort and a more standardized questionnaire is necessary to detect previously undiscovered or under-reported effects.

Lower limb fractures are commonly treated with cast immobilization, and as a main consequence of strict immobilization this typically leads to loss in muscle mass, decrease of bone density and decline in functional abilities. Body-worn sensors are increasingly used to assess outcome in clinical trials by providing objective mobility parameters in a real-world environment. The aim of this study is to investigate the usability aspects and potential changes in mobility parameters in partial-immobilization patients in real-world conditions. Six healthy young males (age 22.2 ± 1.2 years; weight 76.5 ± 6.7 kg, height 185.8 ± 6.1 cm. Mean ± standard deviation) wore a leg cylinder cast with walker boot to immobilize their dominant leg for two consecutive weeks. Subjects were asked to continuously wear a tri-axial accelerometer on the waist (actibelt) during waking hours for 6 weeks including 2 weeks before, during and after cast immobilisation. The total amount of days of continuous recording was 339 days with a total wearing time of 120 days. Software packages which allow to detect steps and to estimate real-world walking speed were used to analyse the accelerometry data. It was suspected that knee immobilization would affect strongly the wave form of the signal with an impact on the accuracy of the speed algorithm, whereas the step detection should be more robust. This effect was confirmed in a preliminary study performed to quantify the accuracy under immobilization conditions. On the other hand, step numbers are known to be sensitive to fluctuations in wearing time which was not uniform throughout the entire study. We concluded that in this setting step frequency is the most reliable parameter. Step frequency showed a systematic decrease in the values during the immobilization period which recovered to pre-immobilisation values after cast removal. This confirms the usability of accelerometry and sensitivity of its mobility parameters for clinical outcome assessment.

The relevance of physical activity (PA) for general health and the value of assessing PA in the free-living environment especially for assessing orthopaedic conditions and outcome are discussed. Available methods for assessing PA such as self-reports, trackers, phone apps and clinical grade monitors are introduced. An overview of devices such as accelerometers for research quality assessments is given and aspects for choosing them such as wear location, usability or study population are reviewed. Basic principles to derive mobility parameters from the PA related sensor signals are presented. The symposium explains mobility parameters, their types, definitions, validity, analysis and those with particular relevance to assess orthopaedic conditions. The application of activity monitors is orthopaedic patient studies is demonstrated in various examples such as knee and hop osteoarthritis and total joint arthroplasty, in frail elderly subjects at fall risk or patients with shoulder pathologies.

Restoring native hip anatomy and biomechanics is important to create a well-functioning total hip arthroplasty (THA). Hip offset and leg length are regarded as the most important biomechanical characteristics. This study investigated their association with clinical outcomes including patient reported outcome measures (PROMs) and functional tests. This prospective cohort study was conducted in 77 patients undergoing primary THA (age=65±11 years). Hip offset and leg length were measured on anteroposterior radiographs of the hip pre- and postoperatively. Participants completed the Western Ontario & McMaster Universities Osteoarthritis Index (WOMAC) and performed functional tests (i.e. gait, single leg stance, sit-to-stand, block step-up) preoperatively, and 3 and 12 months postoperatively. A wearable motion sensor was used to derive biomechanical parameters. Associations between radiographic and functional outcomes were investigated with the Spearman's rho correlation coefficient. Subgroup comparisons were conducted for patients with more than 15% decreased or increased femoral offset after THA. Differences in postoperative offset and leg length had little impact on clinical outcomes. Femoral offset subgroups demonstrated no significantly different WOMAC function scores. In functional tests, patients with >15% decreased femoral offset after THA demonstrated more sagittal plane motion during block step-up (14.43° versus 10.66°; p=0.04) while patients with >15% increased femoral after THA demonstrated more asymmetry of frontal plane motion during block step-up (34.05% versus 14.18%; p=0.03). To create a well-functioning THA, there seems to be a reasonable safe zone regarding the reconstruction of offset and leg length.

3D measurement of joint angles so far has only been possible using marker-based movement analysis, and therefore has not been applied in (larger scale) clinical practice (performance test) and even less so in the free field (activity monitoring). 3D joint angles could provide useful additional information in assessing the risk of anterior cruciate ligament injury using a vertical drop jump or in assessing knee range of motion after total knee arthroplasty. We developed a tool to measure dynamic 3D joint angles using 6 inertial sensors, attached to left and right shank, thigh and pelvis. The same sensors have been used for activity identification in a previous study. To validate the setup in a pilot study, we measured 3D knee and hip angles using the sensors and a Vicon movement lab simultaneously in 3 subjects. Subjects performed drop jumps, squats and ran on the spot. The mean error between Vicon and sensor measurement for the maximum joint angles was 3, 7 and 8 degrees for knee flexion, ad/abduction and rotation respectively, and 9, 7 and 10 degrees for hip flexion, ad/abduction and rotation respectively. No calibration movements were required. A major part of the inaccuracy was caused by soft tissue effects and can partly be resolved by improved sensor attachment. These pilot results show that it is feasible to measure 3D joint angles continuously using unobtrusive light-weight sensors. No movement lab is necessary and therefore the measurements can be done in a free field setting, e.g. at home or during training at a sport club. A more extensive validation study will be performed in the near future.

Introduction

Knee osteoarthritis (KOA) causes impairment through pain, stiffness and malalignment and knee joint replacement (KJR) may be necessary to alleviate such symptoms. There is disagreement whether patients with KJR increases their level of physical activity after surgery. The aim of this study is to investigate whether patients with KJR have a higher level of physical activity than patients with KOA, as measured by accelerometer-based method. Furthermore, to investigate whether patients achieve the same level of activity as healthy subjects five years post TJR.

Introduction

Following primary total knee arthroplasty (TKA), patients experience pain relief and report improved physical function and activity. However, there is paucity of evidence that patients are truly more active in daily life after TKA. The aims of this study were: 1) to prospectively measure physical activity with a wearable motion sensor before and after TKA; 2) to compare patient-reported levels of physical activity with objectively assessed levels of physical activity before and after TKA; 3) to investigate whether differences in physical activity after TKA are related to levels of physical function.

Introduction

Limited physical activity (PA) is one indication for orthopaedic intervention and restoration of PA a treatment goal. However, the objective assessment of PA is not routinely performed and in particular the effect of spinal pathology on PA is hardly known. It is the purpose of this study using wearable accelerometers to measure if, by how much and in what manner spinal stenosis affects PA compared to age-matched healthy controls.

Background

Shoulder pain limits range of motion (ROM) and reduces performing activities of daily living (ADL). Objective assessment of shoulder function could be of interest for diagnosing shoulder pathology or functional assessment of the shoulder after therapy.

The feasibility of 2 wearable inertial sensors for functional assessment to differentiate between healthy subjects and patients with unilateral shoulder pathology is investigated using parameters as asymmetry.

The significance of physical activity (PA) assessment is widely acknowledged as it can aid in the understanding of pathologies. PA of knee osteoarthritis (KOA) patients has been assessed with varying methods, as it is a disease that is known to impair physical function and activity during daily life. Differences between methods have been described for general outcomes (sport participation or sedentary time), yet failed to describe common activities such as stair locomotion or sit-to-stand (STS) transfers. This study therefore aimed to determine the comparability of various methods to assess daily-life activities in KOA patients.

Sixty-one clinically diagnosed KOA patients wore a tri-axial accelerometer (AX3, Axivity, UK) for one week during waking hours. Furthermore, they performed three physical function tests: a 40-m fast-paced walk test (WT), a timed up-and-go test (TUGT) and a 15 stair-climb test (SCT). Patients were also asked to fill out the Knee Osteoarthritis Outcome Score (KOOS), a KOA-specific questionnaire.

Patients were slightly overweight (average BMI: 27.3±4.8 kg/m2), 60 (±10) years old and predominantly female (53%). The amount of daily level walking bouts was only weakly correlated with the WT performance, representing patients” walking capacity, (ρ=−0.33, p=0.01). Similarly, level-walking bouts during daily life correlated weakly with self-perceived walking capacity addressed by the KOOS (ρ=−0.36, p=0.01). For stair locomotion, a slightly different trend was seen. A moderate correlation was found (ρ=0.65, p<0.001), between the amount of ascending bouts and the objective functional test performance (SCT). However, the subjective assessment of stair ascending limitations (via the KOOS) correlated only weakly with both the functional test performance and the measured level of activity (ρ=−0.30 and −0.35, resp.). Comparable results were found for descending motions. STS transfers during daily life correlated moderately at best with the time to complete the TUGT (ρ=−0.43, p<0.01) and only weakly with the self-perceived effort of STS transfers (ρ=−0.26, p=0.04).

Only weak correlations existed between subjective measures and objective parameters (for both functional tests and daily living activities), indicating that they assess different domains (e.g. self-perceived function vs. actual physical function). Furthermore, when comparing the two objective measures, correlation coefficients increased compared to the subjective methods, yet did not reach strong agreement. These findings suggest that addressing common activities of daily life either subjectively or objectively will result in different patient-related outcomes of a study. Assessment methods should therefore be chosen with caution and compared carefully with other studies.

Background

Complete and reliable outcome assessment is important for clinical quality control and research evidence. Online questionnaires offer the opportunity to perform follow-up at distance and desired frequency saving efforts and cost to patients and hospitals increasingly not reimbursed for this service. Patients in this unique study have been invited by mail (not at visit or by phone) and were asked to complete both methods (online, paper) instead of only one option. For the first time, response, completion and reliability of the HOOS, KOOS-PS and New-KSS, popular patient-reported outcomes (PROM's) in TJA were measured.

Background

The goal of total hip arthroplasty (THA) is to reduce pain, restore function but also activity levels for general health benefits or social participation. Thus evaluating THA patient activity can be important for diagnosis, indication, outcome assessment or biofeedback.

Background

In total knee arthroplasty (TKA), patient reported outcome on pain, function or satisfaction fails to differentiate treatment options. Activity, a consequence of pain-free, well functioning TKA and a satisfied patient, may be a discriminative surrogate metric, especially when objectively measured.

Background

To complement subjective patient-reported outcome measures, objective assessments are needed. Activity is an objective clinical outcome which can be measured with wearable activity monitors (AM). AM's have been validated and used in joint arthroplasty patients to count postures, walking or transfers. However, for demanding patients such as after sports injury, running is an important activity to quantify. A new AM algorithm to distinguish walking from running is trialed in this validation study.

Background

Metal-on-metal hip implants can produce adverse tissue reactions to wear debris. Increased metal ion concentrations in the blood are measured as a proxy to wear and the complications it can trigger. Many studies have examined various factors influencing the metal ion concentrations. This is the first study to investigate the effect of physical activity level, as objectively measured in daily life, on blood ion levels, expecting higher concentrations for higher patient activity.

Background

The second generation metal-on-metal (MoM) prosthesis of the hip became a worldwide success in the 90s. However, after the placement of a MoM prosthesis the cobalt ion concentrations raise significantly. This may lead to systemic complaints and even cobalt toxicity.

Background

Assessment of functional outcome after total hip arthroplasty (THA) often involves subjective patient-reported outcome measures (PROMs) whereas analysis of gait allows more objective assessment. The aims of the study were to compare longitudinal changes of WOMAC function score and ambulatory gait analysis after THA, between patients with low and high self-reported levels of physical function.

Aims

Our aim was to prepare a systematic review and meta-analysis to compare the outcomes of cemented and cementless hemiarthroplasty of the hip, in elderly patients with a fracture of the femoral neck, to investigate the mortality, complications, length of stay in hospital, blood loss, operating time and functional results.

Falls and fall-related injuries can have devastating health consequences and form a growing economic burden for the healthcare system. To identify individuals at risk for preventive measures and therapies, fall risk assessment scores have been developed. However, they are costly in terms of time and effort and rely on the subjective interpretation of a skilled professional making them less suitable for frequent assessment or in a screening situation.

Small wearable sensors as activity monitor can objectively provide movement information during daily-life tasks. It is the aim of this study is to evaluate whether the activity parameters from wearable monitors correlate with fall risk scores and may predict conventional assessment scores.

Physical activity data were collected from nineteen home-dwelling frail elderly (n=19, female=10; age=81±5.6 years, GFI=5.4±1.9, MMSE=27.4±1.5) during waking hours of 4 consecutive days, wearing a wearable 9-axis activity monitor (56×40×15mm, 25g) on the lateral side of the right thigh. The signal was analysed using self-developed, previously validated algorithms (Matlab) producing the following parameters: time spent walking, step count, sit-stand-transfer counts, mean cadence (steps/min), count of stair uses and intensity counts >1.5G.

Conventional fall risk assessment was performed using the Tinetti sore (range: 0–28=best), a widely used tool directly determining the likelihood of falls and the Short Physical Performance Battery (SPPB, range: 0–12=best) which measures lower extremity performance as a validated proxy of fall risk. The anxiety to fall during activities of daily living was assessed using the self-reported Short Falls Efficacy Scale-International (FES-I, range: 7–28=worst).

Correlations between activity parameters and conventional scores were tested using Pearson's r.

The activity parameters (daily means) for the 19 participants were 70.8min (SD=28.7; min-max= 22.8–126.6) of walking, 4427 steps (SD=2344; min-max= 1391–8269) with a cadence 79.3 steps per minute (SD=17.1; min-max=52.8–103.9) and 33.3 sit-stand transfers (SD=9.7; min-max=8.8–48.0).

The average Tinetti score was 21.2 (SD=5.1; min-max=10.0–27.0), with SPPB scoring 7.8 (SD=2.4; min-max=3.0–12.0), and FES-I 4.6 (SD=5.1; min-max=7.0–23.0).

Strong (r≥0.6) and significant correlations existed between the walking cadence and the Tinetti (r=.60, p=<.01) and SPPB (r=.71, p=<.01) scores. No other correlations were found between the activity parameters and the Tinetti, SPPB and none with the psychological FES-I questionnaire.

Conventional fall risk scores and activity data are comparable to literature values and thus representative of home-dwelling frail elderly including a wide range covered for both dimensions.

No quantitative activity measure had a predictive value for fall risk assessment. Strongly correlated with Tinetti and SPPB, objectively measured cadence as a qualitative parameter seems a useful parameter for remotely identifying fall risk in frail elderly. The perceived anxiety to falls was not correlated to quantitative and qualitative activity parameters suggesting that this psychological aspect hardly affects activity.

Wearable activity monitors seem a valid tool to assess fall risk remotely and thus allow low cost, frequent and large group screening of frail elderly towards a health economically viable tool for a growing societal need. The predictive quality of activity monitored data may be increased by deriving additional qualitative measures from the activity data.

Besides eliminating pain, restoring activity is a major goal in orthopaedic interventions including joint replacement or trauma surgery following falls in frail elderly, both treatments of highest socio-economic impact.

In joint replacement and even more so in frail elderly at risk of falling, turns are assessed in clinical tests such as the TUG (Timed Get-up-and-Go), Tinetti, or SPPB so that classifying turning movements in the free field with wearable activity monitors promises clinically valuable objective diagnostic or outcome parameters.

It is the aim of this study to validate a computationally simple turn detection algorithm for a leg-worn activity monitor comprising 3D gyroscopes.

A previously developed and validated activity classification algorithm for thigh-worn accelerometers was extended by adding a turn detection algorithm to its decision tree structure and using the 3D gyroscope of a new 9-axis IMU (56×40×15mm, 25g, f=50Hz,).

Based on published principles (El-Gohary et al. Sensors 2014), the turn detection algorithm filters the x-axis (thigh) for noise and walking (Butterworth low-pass, 2^ndorder with a cut-off at 4Hz and 4^thorder with a cut-off at 0.3Hz) before using a rotational speed threshold of 15deg/s to identify a turn and taking the bi-lateral zero-crossings as start and stop markers to integrate the turning angle.

For validation, a test subject wore an activity monitor on both thighs and performed a total of 57 turns of various types (walking, on-the-spot, fast/slow), ranges (45 to 360deg) and directions (left/right) in free order while being video-taped. An independent observer annotated the video so that the algorithmic counts could be compared to n=114 turns. Video-observation was compared to the algorithmic classification in a confusion matrix and the detection accuracy (true positives) was calculated.

In addition, 4-day continuous activity measures from 4 test subjects (2 healthy, 2 frail elderly) were compared.

Overall, only 5/114 turns were undetected producing a 96% detection accuracy. No false positives were classified. However, when detection accuracy was calculated for turning angle intervals (45°: 30–67.5°; 90°: 67.5–135°; 180°: 135–270°; 360°: 270–450°), accuracy for all interval classifications combined dropped to 83.3% with equal values for left and right turns. For the 180° and 360°, accuracy was 100% while for the shorter 45° and 90° turns accuracy was 75% and 71% only, mainly because subsequent turns were not separated.

Healthy subjects performed between 470 (office worker) and 823 (house wife) turns/day while frail elderly scored 128 (high fall risk) to 487 turns/day (low fall risk). Turns/day and steps/day were not correlated. In healthy subjects ca. 50% of turns were in the 45° category compared to only ca. 35% in frail elderly.

Turn detection for a thigh-worn IMU activity monitor using a computationally simple algorithm is feasible with high general detection accuracy. The classification and separation of subsequent short turns can be further improved.

In multi-day measurement, turns/day and the distribution of short and long turns seem to be a largely independent activity parameter compared to step counts and may improve objective assessment of fall risk or arthroplasty outcome.

Eliminating pain and restoring physical activity are the main goals of total hip arthroplasty (THA). Despite the high relevance of activity as a rehabilitation goal of and criterion for discharge, in-hospital activity between operation and discharge has hardly been investigated in orthopaedic patients.

Therefore, the aim of this study was to a) measure for reference the level of in-hospital physical activity in patient undergoing a current rapid discharge protocol, b) compare these values to a conventional discharge protocol and c) test correlations with pre-operative activities and self-reported outcomes for possible predictors for rapid recovery and discharge.

Patients (n=19, M:F: 5:14, age 65 ±5.7 years) with osteoarthritis treated with an elective primary THA underwent a rapid recovery protocol with discharge on day 3 after surgery (day 0). Physical activity was measured using a 3D accelerometer (64×25×13mm, 18g) worn on laterally on the unaffected upper leg. The signal was analysed using self-developed, validated algorithms (Matlab) calculating: Time on Feet (ToF), steps, sit-stand-transfers (SST), mean cadence (steps/min), walking bouts, longest walk (steps).

For the in-hospital period (am: ca. 8–13h; pm: ca. 13–20h) activity was calculated for day 1 (D1) and 2 (D2). Pre-operative activity at home was reported as the daily averages of a 4-day period. Patient self-report included the HOOS, SQUASH (activity) and Forgotten Joint Score (FJS) questionnaires.

In-hospital activity of this protocol was compared to previously collected data of an older (2011), standard conventional discharge protocol (day 4/5, n=40, age 71 ±7 years, M:F 16:24).

All activity parameters increased continuously between in-hospital days and subsequent am and pm periods. E.g. Time-on-feet increased most steeply and tripled from 21.6 ±14.4min at D1am to 62.6 ±33.4min at D2pm. Mean Steps increased almost as steep from 252 to 655 respectively. SST doubled from 4.9 to 10.5. All these values were sign. higher (+63 to 649%) than the conventional protocol data.

Cadence as a qualitative measure only increased slowly (+22%) (34.8 to 42.3steps/min) equalling conventional protocol values. The longest walking bout did not increase during the in-hospital period. Gender, age and BMI had no influence on in-hospital activity.

High pre-op activity (ToF, steps) was a predictor for high in-hospital activity for steps and SST's at D2pm (R=0.508 to R=0.723). Pre-op self-report was no predictor for any activity parameter.

In-hospital recovery of activity is steep following a cascade of easy (ToF) to demanding (SST) tasks to quality (cadence). High standard deviations show that recovering activity is highly individual possibly demanding personalised support or goals (feedback).

Quantitative parameters were all higher in the rapid versus the conventional discharge protocol indicating that fast activation is possible and safe. Equal cadence for both protocols shows that functional capacity cannot be easily accelerated.

Pre-op activity is only a weak predictor of in-hospital recovery, indicating that surgical trauma affects patients similarly, but subjects may be identified for personalized physiotherapy or faster discharge.

Reference values and correlations from this study can be used to optimize or shorten in-hospital rehabilitation via personalization, pre-hab, fast-track surgery or biofeedback.

Introduction: Physical activity is a major outcome in total hip arthroplasty (THA) and discharge criterion. Increasing immediate post-op activity may accelerate discharge, enable fast track surgery and improve general rehabilitation. Preliminary evidence (O'Halloran P.D. et al. 2015) shows that feedback via motivational interviewing can result in clinically meaningful improvements of physical activity. It was the aim of this study to use wearable sensor activity monitors to provide and study the effect of biofeedback on THA patients' activity levels. It was hypothesized that biofeedback would increase in-hospital and post-discharge activity versus controls.

Methods: In this pilot study, 18 patients with osteoarthritis receiving elective primary THA followed by a rapid recovery protocol with discharge on day 3 after surgery (day 0) were randomized to the feedback group (n=9, M/F: 4:5, age 63.3 ± 5.9 years, BMI 26.9 ± 5.1) or a non-feedback control group (n=9, M/F: 0:9, age 66.9 ± 5.1 years, BMI 27.1 ± 4.0). Physical activity was measured using a wearable sensor and parameters (Time-on-Feet (ToF), steps, sit-stand-transfers (SST), mean cadence (steps/min)) were calculated using a previously validated algorithms (Matlab). For the in-hospital period data was calculated twice daily (am, ca. 8–13:00h and pm, ca. 13–20:00h) of day 1 (D1) and 2 (D2). The feedback group had parameters reported back twice (morning, lunch) using bar charts comparing visually and numerically their values (without motivational instructions) to a previously measured reference group (n=40, age 71 ±7 years, M:F 16:24) of a conventional discharge protocol (day 4/5). Activity measures continued from discharge (D3) until day 5 (D5) at home.

Results: Randomization resulted in matched groups regarding age and BMI, but not gender. The first post-op activity assessment (D1am) was identical between groups. Also thereafter similar values with no significant differences in any parameter were seen, e.g. the time-on-feet at D2PM was 59.2 ±31.7min (feedback) versus 62.9 ±39.2min (controls). Also on the day of discharge and beyond, no effect from the in-hospital feedback was measured. For both groups the course of activity recovery showed a distinct drop on day 4 following a highly active day of discharge (D3). On day 5, activity levels only recovered partially. For both groups, all quantitative activity parameters were significantly higher than the reference values used for feedback. Only cadence as a qualitative measure was the same like reference values.

Discussion: Biofeedback using activity values from a body-worn monitor did not increase in-hospital or immediate post-op home activity levels compared to a control group when using the investigated feedback protocol. In general, while the day of discharge steeply boosts patient activity, the day after at home results in an activity drop to near in-patient levels before discharge. In a fast track surgery protocol, it may be of value to avoid this drop via patient education or home physiotherapy. Biofeedback using activity monitors to increase immediate post-op activity for fast track surgery or improved recovery may only be effective when feedback goals are set higher, are personalised or have additional motivational context.

Introduction

The goal of total hip arthroplasty (THA) is to reduce pain, restore function but also activity levels for general health benefits or social participation. Thus evaluating THA patient activity can be important for diagnosis, indication, outcome assessment or biofeedback.

Introduction

Unicompartmental knee arthroplasty is in particular promoted for knee OA patients with high demands on function and activity. This study used wearable inertial sensors to objectively assess function during specific motion tasks and to monitor activities of daily living to verify if UKA permits better function or more activity in particular with demanding tasks.

Summary

Physical activity monitoring using a single accelerometer works reliably in clinical practice and is of added value as clinical outcome tool, as it provides objective and more precise information about a patient's activity compared to currently used questionnaires.

Summary

Upper extremity activity was similar in patients and healthy subjects, showing no significant asymmetry between arms within subjects. Further improvements (e.g. thresholds, filters, inclinometer function) are needed to show the clinical value of AM for patients suffering shoulder complaints.

Summary

Movement analysis (IMA) and activity monitoring (AM) using a body-fixed inertia-sensor can discriminate patients with ankle injuries from controls and between patients of different pathology or post-injury time. Weak correlations with PROMs show its added value in objectifying outcome assessment.

Summary

A single 3D accelerometer is accurate in measuring upper-extremity activity durations, rest periods and intensities, suggesting its feasibility for daily life measurements with patients. Further enhancements are feasible to reduce residual false classifications of intensity from certain activities.

Introduction

The human body is a complex and continually adapting organism. It is theorised that the morphology of the proximal femur is closely related to that of the distal femur. Patients that have abnormal anatomy in the proximal femur, such as a high femoral neck anteversion angle, may have abnormal anatomy in the distal femur to overcome proximal differences. This phenomenon is of key interest when performing Total Hip Replacement (THR) or Total Knee Replacement (TKR) surgery. The current design and placement of existing hip and knee implants does not account for any correlation between the anatomical parameters of the proximal and distal femur, where bone anatomy may have adapted to compromise for abnormalities.

A preliminary study of 21 patients has been carried out to assess the relationship between the proximal and distal femur. The difficulties in defining and measuring key anatomical parameters on the femur have been widely discussed in the literature [1] due to its complex three dimensional geometry. Using CT scans of healthy octogenarians, it was possible to mark key anatomical landmarks which could be used to define various anatomical axes throughout the femur. Correlation analyses could then be carried out on these parameters to assess the relationship between proximal and distal femur morphology.

Accelerometer based gait analysis (AGA) is a potential alternative to the more commonly used skin marker based optical motion analysis system(OMAS). The use of gyroscopes in conjunction with accelerometers (i.e. inertial sensors), enables the assessment of position and angular movements of body segments and provides ambulatory kinematic characterisation of gait.

We investigated commonly used gait parameters and also a novel parameter, Pelvic obliquity (PO) and whether they can be used as a parameter of physical function and correlate with classic clinical outcome scores

Gait was studied in healthy subjects (n=20), in patients with end stage hip OA (n=20) and in patients with end stage knee OA (n=20). Subjects walked 20 metres in an indoor environment along a straight flat corridor at their own preferred speed. A 3D inertial sensor was positioned centrally between the posterior superior iliac spines (PSIS) overlying S1.

Comparing gait parameters of end stage hip OA patients with an age and gender matched healthy control group, significantly lower walking speed, longer step duration and shorter step length was observed. After correcting for walking speed between groups, significantly less average range of motion of PO (RoM_po) was observed for patients with end stage hip OA compared to healthy subjects and patients with end stage knee OA.

IGA allows objective assessment of physical function for everyday clinical practice and allows assessment of functional parameters beyond time only. IGA measures another dimension of physical function and could be used supplementary to monitor recovery of OA patients after TJR.

Introduction

In orthopaedics, clinical outcome assessment (COA) is still mostly performed by questionnaires which suffer from subjectivity, a ceiling effect and pain dominance. Real life activity monitoring (AM) holds the promise to become the new standard in COA with small light weight and easy to use accelerometers. More and more activities can be identified by algorithms based on accelerometry. The identification of stair climbing for instance is important to assess the participation of patients in normal life after an orthopaedic procedure. In this study we validated a custom made algorithm to distinguish normal gait, ascending and descending stairs on a step by step basis.

Introduction

Patient satisfaction becomes an important aspect in clinical practice causing a shift from clinician-administered scales (CAS) towards patient-administered measurement outcomes (PROMs). Besides, clinical outcome can objectively be evaluated using inertia-based motion analysis (IMA). This study evaluates different outcome measures by investigating the 1) effect of replacing CAS by PROMS on outcome assessment, 2) redundancy between scales, 3) additional value of IMA in outcome scoring.

Introduction

Our classic outcome scores increasingly fail to distinguish interventions or to reflect rising patient demands. Scores are subjective, have a low ceiling and score pain rather than function. Objective functional assessment tools for routine clinical use are required. This study validates inertial sensor motion analysis (IMA) by differentiating patients with knee versus hip osteoarthritis in a block-step test.

Introduction

Increasing numbers and incidence rates of noisy (squeaking, scratching or clicking) ceramic-on-ceramic (CoC) total hip arthroplasties (THA) are being reported. The etiology seems to always involve stripe wear producing a stick-slip effect in the bearing which excites vibrations. As stripe wear is also found in silent CoC bearings, a theory has been developed that the vibrations become audible only via amplification through the vibrating stem. This was supported by showing that the excitation frequency and the resonance frequency of the plain stem are similar [1]. However, stem resonance in-vivo would be influenced by the periprosthetic bone damping and transmitting stem vibrations. Thus, if stem resonance is conditional for noisy COC hips, these should show periprosthetic bone different to silent hips.

This study compares stem fit&fill and periprosthetic bone between noisy and silent CoC hips.

Introduction

In orthopaedics, clinical outcome assessment (COA) is mostly performed by questionnaires which suffer from subjectivity, a ceiling effect and pain dominance. Real life activity monitoring (AM) can objectively assess function and becomes now feasible as technology has become smaller, lighter, cheaper and easier to use. In this study we validated a custom made algorithm based on accelerometry using different orthopaedic patients with the aim to use AM in orthopaedic COA.

Introduction

Large wear rate reductions have been shown for crosslinked PE in simulators and short- to mid-term clinical wear studies. However, concerns persist about long-term in-vivo oxidation (especially with annealed PE), late accelerating wear and the possibly higher osteolytic potential of crosslinked PE particle debris. This is the first long-term study comparing conventional to crosslinked PE investigating whether the wear reduction is maintained in the long-term and if reduced osteolysis becomes evident.

Introduction: In clinical orthopaedics questionnaire based outcome scores such as the DASH shoulder score suffer from a ceiling effect, subjectivity and the dominance of pain perception over functional capacity. As a result it has becomes increasingly difficult to clinically validate medical innovations in therapy or implants and to account for rising patient demands. Thus, objective functional information needs to be added to routine clinical assessment. Motion analysis with opto-electronic systems, force plates or EMG is a powerful research tool but lab-based, too expensive and time consuming for routine clinical use. Inertia sensor based motion analysis (IMA) can produce objective motion parameters while being faster, cheaper and easier to operate. In this study a simple IMA shoulder test is defined and

its reliability tested,

Methods: An inertia sensor (41x63x24mm3, 39g) comprising a triaxial accelerometer (±5g) and a triaxial gyroscope (±300°/sec) was taped onto the humerus in a standardised position. One-hundred healthy subjects without shoulder complaints (40.6 ±15.7yrs) and 40 patients (55.4 ±12.7yrs) with confirmed unilateral shoulder pathology (29 subacromial impingement, 9 rotator cuff pathology, 2 other) were measured. Two motion tasks (‘hand behind the head’ and ‘hand to the back’) based on the Simple Shoulder Test (SST) were performed on both shoulders (three repetitions at self selected speed). Motion parameters were calculated as the surface area described by combing two angular rate signals of independent axes (ARS) or by combing the angular rate and the acceleration of a single axis (COMP score). The relative asymmetry between two sides was scored.

Results: The test produced high intra-(r2≥0.88) and inter-observer reliability (r2≥0.82). Healthy subjects scored a mean asymmetry of 9.6% (ARS) and 14.6% (Comp). Patients with shoulder complaints showed > 3× higher asymmetry (ARS: 34.1%, Comp: 42.7%) than the healthy controls (p< 0.01). Using thresholds (ARS: 16%, Comp 27%) healthy and pathological subjects could be distinguished with high diagnostic sensitivity (e.g. ARS: 97.5% [CI: 85.3–99.9%]) and specificity (e.g. COMP: 85.5% [CI: 76.1–91.1%]). Both asymmetry scores were strongly intercorrelated (r2=0.76) as were the clinical scores (r2=0.62, DASH-SST). Asymmetry and clinical scores were hardly correlated (r2< 0.14).

Discussion: The IMA shoulder test and asymmetry scores showed high reliability meeting or exceeding common clinical scores. With a fast assessment of a simple ADL tasks (test duration < 60s) it was possible to provide diagnostic power at clinically usable level making routine clinical application feasible even by nonspecialist personnel. Weak correlations with the clinical scores show that the new test adds an objective functional dimension to outcome assessment which may have the potential to differentiate new treatments or implants required to trigger new therapeutic innovation cycles. Similar motion tests and parameters could also serve lower extremity outcome assessment.

Introduction: In total hip arthroplasty (THA) an optimal fit and fill of the stem is essential for stable fixation. Thus femur morphology must be studied during pre-op planning (implant choice, sizing, positioning) or when a new stem is to be designed. Using plain AP x-ray analysis and the definition of a simple two-level parameter (canal flare index, CFI), Noble et al. identified an age related transition of the endosteal canal in AP view from a ‘champagne flute’ to a ‘stove pipe’. This reference data is 2D only, limited to the endosteal geometry and the elderly age range was defined as 60–90yrs so that the number of octogenerians > 80yrs was too low to analyze morphological features of this rapidly growing and critical THA patient population.

In this study the endosteal and periosteal femur morphology of subjects > 80yrs was studied using 3D CT analysis. It was the goal to

describe age related changes of the femur morphology in 3D,

Methods: High-resolution CT-scans (slice thickness 1mm) were made of 170 consenting volunteers (m/ f=101/69). The old group consisted of 119 subjects ≥80yrs (m/f=65/54, mean age: 84.1yrs [80–105]) and the young group of 51 subjects < 80yrs (m/f=36/15, mean age 67.8yrs [39–79]). After thresholding the bone boundaries in Mimics V12 (Materialise, B), the endos-teal and periosteal coordinates were analyzed for width, wall thickness, surface areas and various CFI’s relating dimensions at 20mm above LT and at a distal level (e.g. 60mm below LT, isthmus): Surface CFI (3D-CFI), frontal and lateral CFI based on the AP and ML projections (2D-CFI) and flaring in each of the four directions (1DCFI).

Results: The surface CFI was sign. lower in subjects ≥80yrs (5.08 ±1.23) than in subjects < 80yrs (6.61 ±1.72, p< 0.0001). This difference was sign. larger in females than in males (−32% vs. −17%), an observation valid with reference to any distal level. Equivalent age differences were found in both the frontal and lateral 2D-CFI as well as the medial, lateral and anterior 1D-CFI with changes in the anterior direction (−26.3%) being most dominant. In addition wall thickness was sign. reduced in the very elderly. E.g. at 20mm above LT, the medial wall measured 10.40mm at < 80yrs and 7.61 at ≥80yrs, a reduction of −27% (p< 0.001). In females (−35%) this difference was sign. larger (males: −23%, p< 0.001) even when corrected for height.

Discussion: The age driven transition of proximal femur morphology continues in the octogenarian population. This transition is not limited to two discrete levels in the AP plane as previously reported but it is a continuous 3D phenomenon with high directional asymmetry. In addition, this transition also affects the wall thickness and the periosteal shape. Furthermore a strong gender effect was identified with aging females showing increasingly and asymmetrically less flaring and thinner walls. An age and gender specific THA stem design seems necessary to fit the morphed femur. The asymmetric transition prohibits the effective use of current implant systems with proportionally scaled dimensions but favors a matrix sizing scheme with frontal and lateral dimensions changing independently.

Due to demographic changes patients > 80yrs (octogenarians) are a rapidly growing group in total hip arthroplasty (THA). Stem design, choice, sizing and surgical insertion are more important in these patients as complications such as fractures are critical. Age and gender driven differences regarding canal shape (flare index, CFI), cortical wall thickness (WT) and bone mineral density (BMD) have been studied before only in isolation. Using CT, this study aims to investigate these parameters in combination and in 3D with a focus on the very elderly, identifying the regions critical for THA.

High-resolution CT-scans (1mm slices) of 168 femora (M/F=100/68) were analyzed in 3D (Mimics V12). Flaring indices were based on the dimensions measured 20mm proximal to the lesser trochanter (LT) and 60mm distal to LT: intramedullary surface area (3D-CFI), frontal/lateral planes (2D-CFI) and flaring of the 4 sides medial (med), lateral (lat), anterior (ant), posterior (post) (1D-CFI). WT was calculated subtracting periosteal and endosteal dimensions and BMD was measured in Hounsfield Units (HU). An octogenarian group (80+: n=117, mean age 84yrs [80–105]) was compared to a typical THA age group (80−: n=51, mean age 68yrs [39–79]).

Age and gender had significant effects on several parameters but at different levels, e.g. 2D frontal CFI was more influenced by the small age difference (80+ vs 80−=12%, p< 0.01) than gender (F vs M=2%). However, regarding lateral canal width, gender (F vs M=7%, p< 0.01), was more influential than age (80+ vs 80−=3%). The age-related changes on the shape occurred in 3D (3D-CFI 80+ vs 80−=23%, p< 0.01), but were asymmetrical between the 4 sides (e.g. 1D-CFI 80+ vs 80−: med=11%, p< 0.01) vs ant=27%, p< 0.01). Age and gender did not only effect shape, but also cortical WT, e.g. proximally octogenarian females had 35% less WT than the typical THA age group while males only had 14% lower WT (p< 0.01). Age, gender and shape asymmetry was also reflected in BMD distribution. on the medial side, the BMD gender difference in the octogenarians was small (=1%, p=0.61) but high on the anterior side (12%, p< 0.01). The most critical configurations for the octogenarians were found proximally on the posterior side with the lowest WT, lowest BMD and largest gender difference.

The complex transition of the proximal femur affects shape, WT and BMD, continues in the very elderly and differs between genders. It produces femoral canals and bone stock different from the typical THA patient group. Conventional stems may not fit properly. Surgical implant choice, sizing and templating should consider this asymmetric age plus gender effect on shape, WT and BMD to avoid complications such as periprosthetic fracture, excessive migration or luxation in this vulnerable age group. A major risk zone is the posterior wall where age transition and gender differences are high and WT and BMD low.

Introduction: While conventional acetate x-rays came at a fixed size and magnification, digital x-rays are freely scalable on the screen and thus must be individually calibrated for surgical measurements (templating). The standard technique is calibration by a reference object (ruler, ball, coin) to be placed into the x-ray. In clinical practice, x-rays are often taken without a calibration object, the object may be malpositioned or the bucky system’s objectfilm distance is unknown to scale with a fixed magnification. Thus calibration based on an anatomic dimension would be a useful alternative in clinical practice.

In this study x-ray calibration using the femoral head diameter as derived by an anatomic formula is compared to the standard technique of using a calibration ball and acetate type fixed magnification.

Methods: In a prospective study three calibration Methods: were applied to post-op AP digital x-rays of 42 patients (m/f=12/30, height: 151–185cm) following primary total hip arthroplasty (ABG-II, 28mm heads) using a common templating software (Endomap): M1) 30mm metal ball lateral to the affected side at the height of the trochanter, M2) a fixed magnification of 121% (average of bucky system as derived from a pilot study) and M3) anatomic calibration by assigning to the natural femoral head of the contralateral side its diameter derived by an anatomic formula. The gender specific linear relationship between height (h [cm]) and the bony femoral head diameter (d [mm]) was obtained from a CT study (n=120): Males: d=0.156h+23.941, Females: d=0.154h+20.040). For each method applied by two independent observers, the implant’s metal head was measured and the relative error [%] calculated.

Results: The standard technique, calibration by a reference object produced a relative error (mean +/−SD) of 2.01+/−1.82% (max=7.9%). Fixed magnification had sign. less error at 1.41+/−1.3% (max=6.5%, p< 0.05). Anatomic calibration produced sign. higher errors at 2.77+/−1.96% (max=8.4%, p< 0.05). Inter-rater reliability was highest for the fixed magnification (r=0.93) and less for ball calibration (r=0.67) and anatomic calibration (r=0.52).

Discussion: It was shown once more that in THR fixed magnification of digital x-rays is on average more accurate and reliable than using a calibration object such as a ball. The theoretical benefit of individual calibration is lost by the variability in landmark palpation, object placement and patient movement though last can be limited by taping the object (e.g. coin) to the skin. Anatomic calibration based on the current formula cannot replace the use of calibration objects. However its error is within clinically tolerable ranges and it can be used when no calibration object is available or the system’s magnification is unknown. The error may be reduced by more accurate height measurements.

Introduction: Issues regarding total joint replacement (TJR) are perceived differently between patients and doctors and this may lead to patients being unsatisfied about their consultation or even their procedure as questions were not satisfactorily answered. However, even in a research setting, the real patient concerns are difficult to capture as questionnaires bias the answers to the expectations of the researchers and free interviews require too large numbers for monitoring purposes.

Internet keyword search is an indicator of true patient interest as searches are entered in privacy. It is now technologically possible to monitor search term frequency over time, per region and identify the most frequent related searches.

It is the aim of this study to identify the most popular and fastest rising search terms regarding TJR in Europe by studying internet search history.

Methods: Keywords regarding TJR were analysed in Google Insight, a new application which allows the history of search term frequency (relative popularity to a maximum of 100) to be tracked for any time period since 2004. The 10 most frequently searched related terms are evaluated as well as the fastest growing searches regarding the subject in comparison to the previous year. Keywords analysed were: hip replacement and knee replacement (in UK and USA) and their language equivalents in German, French, Spanish, Dutch and Polish to compare national differences.

Results: In the non-English speaking countries, the top 10 search terms are mostly variants of the original keyword (e.g. total hip surgery instead of replacement). The most popular non-synonymous terms relate to the post-op care such as recovery, rehabilitation or physiotherapy. Their prevalence is higher with knee than hip replacement. No top or fastest growing search term referred to pain, complications or longevity. Only rarely implant type related searches are popular in non-English speaking countries (Spain: hip resurfacing, NL: hemi-knee). Also in the UK and USA searches regarding aftercare are most popular but TJR pain is on the rise, especially with knees. In the UK rising search interests includes NHS issues and two product names (Oxford knee, Birmingham hip). In the USA, search focus is even more specific including most major company names plus cost issues.

Discussion: Internet keyword search history seems a promising tool to monitor and analyse public interest in issues of health care provision across nations. In the context of TJR, a dominant and rising interest was found in recovery issues. It appears beneficial to increase the availability and quality of such information (e.g. instructional videos of rehab exercises). Trends towards patient marketing and cost are still weak in Europe. Professional societies or health care providers may try to steer such interest towards objective information sources.

Introduction: Increasing numbers and incidence rates of noisy (squeaking, scratching, clicking) ceramic-on-ceramic (CoC) total hip arthroplasties (THA) are being reported. The etiology seems to always involve stripe wear producing a stick-slip effect in the bearing which excites vibrations. As stripe wear is also found in silent CoC bearings, a theory has been developed that the vibrations become audible only via amplification through the vibrating stem (bell-clapper theory). This was supported by showing that the excitation frequency and the resonance frequency of the plain stem are similar. However, stem resonance in-vivo would be influenced by the periprosthetic bone damping and transmitting stem vibrations. Thus, if the bell-clapper theory were true, noisy CoC hips should show periprosthetic bone different to silent hips.

This study compares stem fit& fill and periprosthetic bone between noisy and silent CoC hips.

Methods: In a consecutive series of 186 primary CoC hips with identical stems, cups (Stryker ABG-II) and femoral heads (Alumina V40, 28mm) a survey identified 38 noisy hips (incidence rate: 20.4%, squeakers: n=23). Stem fit& fill and cortical wall thickness (CWT, medial and lateral) were measured on post-op AP x-rays according to the method of Kim & Kim. Measurements were repeated by a single blinded observer in a control group of silent hips matched for gender, age, stem size and follow-up time (4.6yrs). Fit& fill and CWT were compared between the noisy and silent group at proximal, mid-stem and distal level and on the medial and lateral side.

Results: The endosteal canal width was equal in noisy (N) and silent hips (S) at all levels (e.g. proximal: N=39.7+/−5.5mm, S=41.3+/−5.7mm). On the lateral side also cortical wall thickness (CWT) was the same at all levels (e.g. proximal: N=2.0+/−0.8mm, S=1.9+/−0.9mm). However, on the medial side, noisy hips had higher CWT at proximal (N=4.9+/−2.8mm, S=3.0+/−2.1mm, p< 0.01) and mid-stem level (N=6.2+/−2.1mm, N=4.6+/−1.7mm, p< 0.001). Also Fit& fill was slightly higher (proximal: N=66%, S=62%; mid-stem: N=63%, S=59%, p< 0.05). Differences and significance levels increased when only squeakers were considered.

Discussion: Despite equal endosteal canal widths and lateral cortical wall thickness for noisy and silent hips, noisy hips had sign. thicker medial walls at proximal (+63%) and mid-stem level (+35%) where also fit& fill was higher. This gives evidence that periprosthetic bone (PPB) may play a role in the development of audible noise in CoC hips by providing particular conditions of support, damping and transmission for an oscillating stem which influences noise frequency and intensity. Comparing PPB at different time points indicated that the differences are less due to post-op remodeling but more to pre-op conditions, surgical canal preparation and possibly stem design. The findings shall be verified by a DEXA study.

Introduction: Clinical outcome scores such as the DASH shoulder score suffer from subjectivity, a ceiling effect and pain dominance masking functional changes which shall be assessable to address rising patient demands and improve the clinical validation of modern therapeutic improvements. Lab based motion analysis may provide such data but it is too costly, time consuming and complex for routine clinical follow-up. Inertia sensor based motion analysis (IMA) can produce objective movement parameters while being fast, cheap and easy to operate.

In this study, a simple and clinical feasible inertia sensor based motion analysis (IMA) shoulder test is defined and tested for its

reliability,

Methods: An inertia sensor (41x63x24mm, 39g) comprising 3D accelerometers (±5g) and 3D gyroscopes (±300°/sec) was taped onto the humerus in a standardised position. Healthy subjects (n=100, 40.6 ±15.7yrs) and 50 patients (55.6 ±12.7yrs, m/f 17/33) with confirmed unilateral shoulder pathology (39 subacromial impingement, 11 other) were measured. Two motion tasks (hand-behind-head, hand-to-back) were performed on both shoulders. Using automated algorithms, a simple motion parameter was calculated by adding the peak-to-peak angular rates per axis. The relative asymmetry between both shoulder sides was scored (healthy control within subject). Patients were also assessed using the DASH score and the Simple Shoulder Test (SST).

Results: The test produced high intra- (r2=0.90) and inter-observer reliability (r2=0.83). Asymmetry was > 3 times higher in patients (36.3%) than healthy controls (9.6%, p< 0.001). Using a threshold (> 16% asymmetry) healthy and pathological subjects could be distinguished with high diagnostic sensitivity (98.0%) and specificity (81.0%). The non-affected shoulders of the patient group did not differ from the shoulder of the healthy group (p=0.18). Sub-group analysis comparing the 30 best performing healthy to the 10 highest asymmetry pathological shoulders also revealed sign. lower range of motion, shorter motion path and longer cycle times (p< 0.01). Visual signal analysis exposed specific motion patterns (e.g. healthy: overshooting at point of task achievement, pathological: drift or tremble at rest position). IMA asymmetry was only weakly correlated with DASH or SST (r2< 0.25).

Discussion: The IMA shoulder test and asymmetry score showed high reliability and diagnostic power meeting or exceeding common clinical scores. The fast assessment (t< 60s) of a simple motion tasks makes it suitable for routine clinical follow-up to supplement classic scores. Weak correlations with DASH and SST show that the test adds an objective functional dimension to outcome assessment.

Early prediction of outcome following hip fracture surgery would save valuable time towards arranging post-op rehabilitation benefiting the patient and health economics. The study aim was to develop a prognostic scoring system for elderly hip fracture patients, which on admission is able to predict rehabilitation needs at discharge based on pre-injury factors.

A simple and fast prognostic scoring system was developed based on age, pre-injury level of “independence in activities of daily living” (Katz), medical co-morbidities, cognitive functioning (MMSE) and presence of a caregiver, to predict rehabilitation needs at discharge (0–8 points). Rehabilitation options were direct return to pre-injury living situation (group 1), transfer to an orthopaedic rehabilitation unit for a period shorter than 3 months (group 2), or transfer to a psychogeriatric or orthopaedic rehabilitation unit for a period longer than 3 months (group 3). Rehabilitation needs as predicted and the clinical decision by independent, blinded observers were compared. The score was validated in a prospective study on a consecutive cohort of 77 hip fractured patients.

Overall positive predictive value (PPV) of the prognostic score was 0.87 (CI 0.77–0.93), a marked improvement compared to previously published scoring systems with a PPV of 0.68 (CI 0.55–0.79). PPV per group (0.80, 0.92, 0.87) was highest for the most critical groups 2 and 3. In-hospital mortality was 1.3 percent. The average length of hospital stay (LOS) was 11.4 days.

Using the score fast and reliable prediction of rehabilitation needs could be made already on admission gaining maximum time for the preparation of adequate discharge destinations improving care and reducing costly LOS.

Polyethylene (PE) wear particle induced osteolysis remains a major cause of failure in total hip arthroplasty (THA), so that routine clinical measurement of wear stays important. Crosslinked PE promises very low wear rates so that measurement accuracy becomes increasingly important to distinguish alternative materials. The rising use of large femoral heads causes lower linear head penetration also requiring improved accuracy. Digital x-rays and wear measurement software have become standard, but during archiving and exchange of x-rays, image format, resolution or compression are often changed without knowing the effects on wear measurement. This study investigates the effect of digital x-ray resolution and compression on the accuracy of two software programs to measure wear.

The 8-year post-op digital x-rays of 24 THA patients (Stryker ABG-II, 28mm metal femoral head against Duration or conventional PE) were taken from the hospital PACS (Philips Diagnost H, AGFA ADC Solo, Siemens Medview) as DICOM at 5.1 MPix resolution. Images were converted to compression-free TIFF format using Irfanview V4.1. Wear (linear head penetration) was measured using Roman V1.7 and Martell Hip Analysis Suite 7.14. The x-rays were smoothened (Irfanview V4.1, Median Filter: 3) as recommended in literature for compatibility with Martell’s edge detection algorithm. Wear was measured twice by two independent observers at original format and resolution and then once by a single observer at three subsequently halved resolutions (2.6, 1.3, 0.65MPix) and three jpeg compressions (90%, 50%, 20%). Intra- and inter-observer reliability (R) was compared to the reliability of measuring manipulated images (Pearson’s r). The mean absolute wear differences (AD) were calculated versus the original x-ray.

The mean total wear was 0.98+/−0.59mm (0.3–2.4mm) equaling an annual of wear rate of 0.11mm/yr. Using Roman, Intra-R (0.97) and Inter-R (0.96) were high and AD low (0.10 and 0.20mm). Reduced image resolution caused the R to drop only slightly to 0.95 (2.6MPix), 0.92 (1.3MPix) and 0.94 (0.65MPix) while AD remained low (< 0.20mm). Also compression hardly affected R (90%:0.96, 50%: 0.94, 20%:0.93) nor AD (< 0.20mm). Using Martell Intra-R (0.99) and Inter-R (0.87) were also high but dropped with reducing resolution (0.82, 0.72, 0.34, AD: 0.4–1.1mm) but hardly with increased compression (0.95, 0.92, 0.94, AD< 0.20mm).

Low resolution and high compression do not have to be critical for wear measurement accuracy and reliability when edge detection is performed by a trained human eye. This way interpolating the ball and cup perimeters and locating their centers can be performed at accuracy below pixel size (ca. 0.40mm at 0.65MPix). Automatic edge detection is less robust to reducing resolution but performs at high compression. If image size needs to be reduced compression is preferable to reducing resolution.

Modern orthopaedics increasingly demands objective functional outcome assessment beyond classic scores and tests suffering from subjectivity, pain dominance and ceiling effects. Inertia based motion analysis (IMA) is a simple method and validated for gait in knee arthroplasty patients. This study investigates whether IMA assessed stair climbing can distinguish between healthy and pathological subjects and is able to diagnose a meniscal tear (MT).

Following standard physical examination (McMurray, rotation pain), 37 patients (18–72yrs) received arthroscopy suspecting a meniscal tear resulting from trauma, degeneration or both. Arthroscopy identified the presence or absence of MT and the osteoarthritis level (Outerbridge).

Prior to arthroscopy, the ascending and descending five stairs twice at preferred speed and without the use of handrails was measured using a triaxial accelerometer (62×41×18mm; m=53g; f=100Hz) taped to the sacrum. Based on peak detection algorithms, temporal motion parameters were derived such as step time up and down (Tup, Tdown), the difference between step time up and down (Tup-down), step irregularity (step time difference of subsequent steps) and step asymmetry (step time difference between affected and non-affected leg).

Patients were compared to a control group of 100 healthy subjects (17–81yrs) without any known orthopaedic pathology. Using the results of arthroscopy, test sensitivity and specificity for differentiating healthy and pathologic subjects and for diagnosing MT were calculated based on threshold values.

Sensitivity and specificity for detecting pathological motion was 0.68 (CI 0.50–0.81) and 0.92 for the most sensitive parameter (Tdown). Sensitivity and specificity to detect MT was 0.74 and 0.25 percent overall compared to 0.53 and 0.50 for the McMurray. Sensitivity increased to 1.00 when MT was combined with a chondropathy scale III or IV (McMurray 0.33).

IMA assessed stair climbing can distinguish healthy and pathological subjects and detect the presence of MT with better sensitivity than classic scores especially when combined with severe chondropathy. IMA is a simple and fast clinical outcome measure suitable for routine follow-up and may support the diagnosis of meniscal tears prior to arthroscopy.

In orthopaedics new objective functional outcome tools are required to validate the benefits of new surgical techniques or implants for which classic scores such as the KSS, HHS or Womac have been shown not to be discriminative enough. Inertia based motion analysis (IMA) is a cheap, fast and simple technique which requires no gait lab or specialist personnel and thus is suitable for routine clinical outcome assessment. IMA on gait has been validated for total knee replacement (TKR) but normal gait was considered not demanding enough for certain orthopaedic differences. Sit-stand-Sit is a more demanding task of daily activity which can be assessed quickly during consultation. This study investigates whether an IMA assessed sit-stand-sit test can differentiate healthy subjects from pre-op TKR patients.

Rising (sit-to-stand) from a chair and sitting down (stand-to-sit) at comfortable, self-selected speed was measured three time using a triaxial accelerometer (range: +/−2g, f=100Hz, 64×62×13mm, m=54g) taped to the sacrum. The chair (no armrests) was height adjustable (legs at 90deg flexion) to level the effort for different body heights.

70 healthy volunteers (f/m=48/22, age range: 17–81yrs) were compared to a pathological group of 20 patients with knee osteoarthritis indicated for unilateral TKR (Biomet Vanguard) measured at 1–10 days pre-op (f/m=11/9; mean age: 65.6yrs, range: 45–79; KSS: 43.5, range: 5–65). The healthy group was split into two subgroups, an age-matched “Old” group (> 50yrs: n1=28, mean age: 65.2yrs) and a “Young” group (< 50yrs: n2=32, mean age: 28.0yrs).

Motion parameters derived were the time to stand up (Tup), time to sit down (Tdwn), the time difference between rising and sitting down (Tu−d) and the combined time of rising and sitting down (tu+d) as mean values and per individual repetition.

All motion parameters were sign. slower with higher variance for the pre-TKR versus the healthy subjects, even when compared to the age-matched subgroup (except Tu−d). Threshold values could be defined to delineate healthy from pathological performance, e.g. Tup> 220ms (6/70=9% vs 17/20=85%, p< 0.01) or Tdwn> 240ms (4/70=6% vs 18/20=90%, p< 0.01) producing high test sensitivity (90%, C.I. 72–98) and specificity (94%, C.I. 89–97). In some false positives (3/6) originally unknown orthopaedic problems were identified in retrospect.

The simple IMA assessed sit-stand-sit test produced motion parameters comparable to values reported for smaller subject groups using methods unsuitable for routine clinical application (e.g. electrogoniometry). Healthy and pathological motion could be distinguished with high sensitivity and specificity even versus age matched controls supporting the validity to use the IMA assessed sit-stand-sit test to complement classic outcome scores with an objective functional component.

While squeaking ceramic bearings in total hip arthroplasty are increasingly reported in the literature, the etiology remains unclear. Cup inclination and anteversion have been correlated with the phenomenon but even amongst well positioned cups bearing noise is observed. Most studies do not distinguish between different types of noise or incidence rate and do only investigate actively complaining patients. This study analysed the incidence of ceramic bearing noise in a single type of hip implant and investigates correlations with patient, implant and surgery parameters.

In a consecutive series of 145 ceramic-on-ceramic primary hips (Stryker ABG-II, 28mm head) in 132 patients (m/f=72/60, avg. age=54yrs) and an average follow-up of 3.0 (1–7) years, noisy bearings were identified by a patient questionnaires stating the type of noise (squeaking, clicking, scratching, combinations), time of initial incidence, incidence rate (permanent, often, sometimes, rare) and type of movement. Patient demographics (age, gender, height, weight, BMI, side of surgery, leg length difference), implant parameters (cup and stem size, neck length) and surgery parameters (cup and stem position, leg length correction) were recorded and compared between the noisy and silent groups (t-test, Fisher Exact test).

Twenty-eight noisy hips (19.3%) were identified with 14 patients reporting squeaking, 16 clicking and 5 scratching including 7 with a combination of noises. Quasi permanent noises were reported for 7 hips (2 often) but in 17 cases the noise appeared only sometimes (2 rare). The average time of first incidence was 1.74 years port-op with 7 hips reporting noise directly after operation and 15 after 2 years or more. Silent and noisy hips were statistically not different regarding age, gender, follow-up time, side of operation, height, weight, BMI, cup and stem size, leg length difference or stem position. Significant differences were identified with the noise group having a steeper cup inclination (49.9° vs 46.9°, p< 0.05) and less frequent shorter (−2.7mm) necks (0 vs 22%, p< 0.01) but more frequent longer (+4mm) necks (50% vs 37%, p< 0.05). Leg length correction was performed less frequent (31 vs 55%, p< 0.01). In the noise group 5 (17%) and in the silent group only 1 (0.9%) cup revisions was performed (p< 0.01).

The incidence of noisy ceramic bearings was higher than usually reported (< 5%) as not only actively complaining subjects but all patients were interviewed. Cup position was confirmed to be a contributing factor but patient weight, height or BMI did not play a role. However, the use of long necks, the absence of short necks and less frequently performed leg length corrections significantly contributed to producing bearing noise. Biomechanical restoration, preoperative planning and soft tissue tension seem to be important factors in bearing noise etiology.

In joint arthroplasty and in knee replacement in particular, the currently used patient assessment scores like KSS, are characterized by subjective ceiling effects. To monitor patients accurately in time, objective function assessment is required which is impossible with the classic scores. A single time point comparison study showed that an acceleration based gait test is reliable to analyze gait and to distinguish between knee pathologies. How-ever the use of an accelerometer to monitor functional changes over time is never reported before and will be investigated in this study. A representative group of 29 TKP patients (11 men, mean age 72yrs, weight 85kg, height 1.68m) operated for osteoarthritis receiving unilateral TKP (Stryker Scorpio) were monitored for 3 months. Classic scores (ROM, KSS, WOMAC, VAS, PDI) and the gait test was performed pre, 2 and 6 weeks and 3 months postoperative. Gait was analyzed using a triaxial accelerometer fixed to the sacrum while walking 6 times 20meters at preferred speed. Movement parameters like step frequency, step time, step length, speed and up/down displacement were calculated based on a peak detection algorithm. The gait test was compared with the classic scores using Pearson correlation. The paired t-test was used to investigate the changes after surgery (p< 0.05). Significant correlations were shown between all classic scores and all movement parameters (except up/down displacement and step length). The function KSS and PDI showed significant correlations with most gait parameters, while all Womac scores did not. Two weeks after surgery, the classic scores reached the preoperative scores. For instance function KSS was 57.21 preoperative and reached a score of 59.75 at 2 weeks postoperative. No significant changes were shown between preoperative and 2 weeks postoperative for the VAS, KSS and PDI. In contrast all gait parameters were significantly impaired at 2 weeks postoperative (step time of 0.63s) compared to preoperative (step time of 0.72s) and reached the preoperative functional abilities only at 6 week follow up or still later (step time of 0.64s). Between the 2nd and 6th week postoperative, significant changes were shown in all classic scores, ROM and in speed, up/down displacement. After 6 weeks postoperative KSS, PDI, ROM and the frequency improved significantly. The correlations between all movement parameters and function KSS and PDI indicates that these scores are more function based due to inclusion of objective function measures like ROM, while the Womac contains only questions about ADLs. According to the classic scales, patients show at 2 weeks similar skills as preoperative, while the gait test shows that patients are performing less at 2 weeks and reach the pre operative ability at 6 weeks. This suggest that the addition of the gait test give more information about the functional changes a patient experiences after surgery.

We have investigated the accuracy of the templating of digital radiographs in planning total hip replacement using two common object-based calibration methods with the ball placed laterally (method 1) or medially (method 2) and compared them with two non-object-based methods. The latter comprised the application of a fixed magnification of 121% (method 3) and calculation of magnification based on the object-film-distance (method 4). We studied the post-operative radiographs of 57 patients (19 men, 38 women, mean age 73 years (53 to 89)) using the measured diameter of the prosthetic femoral head and comparing it with the true value.

Both object-based methods (1 and 2) produced large errors (mean/maximum: 2.55%/17.4% and 2.04%/6.46%, respectively). Method 3 applying a fixed magnification and method 4 (object-film-distance) produced smaller errors (mean/maximum 1.42%/5.22% and 1.57%/4.24%, respectively; p < 0.01). The latter results were clinically relevant and acceptable when planning was allowed to within one implant size. Object-based calibration (methods 1 and 2) has fundamental problems with the correct placement of the calibration ball. The accuracy of the fixed magnification (method 3) matched that of object-film-distance (method 4) and was the most reliable and efficient calibration method in digital templating.

Femoral neck fracture is a serious complication in hip resurfacing arthroplasty and reducing its risk is a major challenge. From a biomechanical point of view changing the geometrical characteristics in surgery could affect the stresses in the femoral neck. We analysed standing AP X-rays of 85 randomly selected patients having pain in the pelvic region in order to gain better understanding of the geometrical influences. Patients were selected on age, weight, pelvis visibility and no deformations of the proximal femur. A variety of geometrical characteristics has been measured and analysed using the two-sided t-test.

A significant difference was found between men and women, which was compared to previous publications in order to verify the measurement method. Statistical indication could not be found for leg-dominancy influencing geometrical dimensions. This is not mentioned in literature, but it is mentioned that the BMC and BMD differs between the legs. Several linear relations have been found between geometrical characteristics and demographics. The average head-neck ratio for both left and right was about 1.4 and the ratio of the abductor moment arm and body moment arm was about 2.1. The linear relation between femoral head diameter and femoral neck diameter indicates that the femoral component should be chosen according to the natural head diameter. The ratio between the abductor arm and body arm in combination with the bodyweight determines the static stresses in the femoral neck and can be changed in surgery by altering the hip axis length and neck shaft angle.

Conclusion: The geometrical characteristics can be changed in surgery and can reduce the stresses in the neck, but in hip resurfacing these changes are relatively small. The question is how much can the geometry be changed and could these changes lead to complications.

To clinically diagnose and postoperatively monitor the younger or more demanding orthopaedic patients it becomes increasingly important to measure function beyond the capacity of classic scores suffering from subjectivity, pain dominance and ceiling effects. This study investigates whether a stair climbing test with accelerometer derived motion parameters in a group of healthy subjects is clinically feasible and valid to distinguish between demographic differences.

The ascending and descending of stairs (preferred speed, no handrails) was measured in 46 healthy subjects (19m/27f, no orthopaedic pathology) using a triaxial accelerometer attached with a belt to the sacrum. The study group was divided in two age groups: young group (15m/16f; age: 25 [21–38]) and old group (4m/11f; age: 67 [54–74]). Motion parameters were derived by acceleration peak detection algorithms based on step times: tup, tdown, tup-tdown,, step irregularity: irrup, irrdown and asymmetry: asymup, asymdown.

Step times were slightly higher ascending (tup=606ms) than descending (tdown=575ms, p< 0.05). The step time difference between ascending and descending (tup-tdown=31ms) showed a significant difference between the young (47ms) and elderly (−7ms). All subjects with descending times ≥20ms slower than ascending (6/46) were elderly. Irregularity and asymmetry were similar between stepping direction and age groups. Asymmetry identified the dominant leg with equal or faster steps than the non-dominant leg in 43/46 cases. Motion parameters were not correlated to gender, height or BMI.

Slower step times down than up seem a promising parameter to detect general or bilateral orthopaedic pathologies. Asymmetry identifying the dominant leg shall detect unilateral pathologies. The accelerometer assessed stair test seems suitable for routine clinical follow-up complementing classic scores.

In joint arthroplasty the currently used patient assessment scores suffer from subjectivity, a low ceiling effect and pain dominance. These effects mask functional differences which are important for today’s demanding patients. Functional assessment tools are needed which can objectively monitor patient outcome. This study investigates whether an acceleration based gait test is able to assess TKR patients.

A cohort of 24 patients (11m, 13f) operated for osteoarthritis receiving unilateral TKR (Stryker Scorpio) were monitored for 3 months post-operative. Classic scores including subscores (KSS, Womac, VAS, PDI) and a gait test were measured pre-operative, at 2 weeks, 6 weeks and 3 months post-operative. Gait was analyzed using a triaxial accelerometer fixed to the sacrum while walking 6 times a 20m distance at preferred speed. Movement parameters like step frequency, step time, step number, vertical displacement, asymmetry and irregularity were calculated based on a peak detection algorithm.

All classic scores were significantly intercorrelated (e.g. KSS and Womac, R=−0.73) indicating a degree of redundancy. Significant correlations were shown between several gait parameters and the KSS, PDI and VAS. Most correlations between gait parameters and a classical score were found for the KSS function subscore indicating it as the most objective functional assessement amongst the classic scores. In contrast Womac did not correlate with any gait parameter. This lack WOMAC capturing objective function was reported before using functional tests.

The classic scales and the gait test cover different dimensions of surgical outcome supporting their combined use to follow up patients The accelerometer based gait test is clinically valid for the follow-up of TKR patients.

Introduction: Simulator wear studies of crosslinked polyethylene (PE) show promising results but long-term clinical investigations addressing concerns about in-vivo aging, PE deterioration, late wear and osteolysis are scarce. This study reports the longest published follow-up comparing conventional to crosslinked PE.

Methods: Crosslinked PE (Stryker Duration: 3MRad gamma irradiation in N2, post-irradiation annealed) was compared to conventional PE (3MRad gamma irradiation in air) in a MTS hip simulator and a prospective randomized clinical study involving 48 THA patients (Stryker ABG-II stem and cup, 28mm ball diameter) with a mean follow-up of 8 (7–9) years. Patients were followed-up annually using the HHS, radiographs and wear measurements applying a digital Livermore method.

Results: Forty patients (23 conventional, 17 Duration) were left for analysis (five premature deaths, 3 loss to follow-up). Both groups were statistically non-different (p> 0.1) regarding age (63.9 years), gender, BMI, stem size, cup size, cup inclination and liner thickness leaving the insert material as the only variable. Pre-op HHS (39.7) and post-op HHS (93.7) were also not different.

At 8-years the wear rate was significantly (p< 0.01) lower for Duration [0.088 ± 0.03 mm/yr (0.02–0.14)] than conventional PE [0.142 ± 0.07 mm/yr (0.05–0.31)]. This reduction (−38%) compared well to the simulator (−45%) and did not change over time (−33% at 5-years). Radiolucencies and signs of osteolysis were also less in the Duration group (n.s.).

Discussion: In-vivo wear reduction by crosslinked PE is similar as predicted by the simulator and does not seem to deteriorate over time. Concerns over higher levels of residual free radicals after annealing instead of remelting do not seem justified. The lower wear correlated with reduced radiographic signs of osteolysis which may result in superior survival at longer follow-up.

Introduction: Wear of the polyethylene (PE) acetabular component is widely regarded as the primary factor limiting the longevity of total hip arthroplasties (THA). To compare wear patterns of different polyethylene inserts computer assisted measurement techniques for in vivo polyethylene wear were developed. This study was performed to investigate which software out of four programs is most precise and easy to use in daily clinical practice.

Materials and Methods: 24 anteroposterior digital radiographs of patients with a THA (Stryker ABG-II with N2Vac and Duration PE inserts in metal backed cups) with an average of 8.0 years follow-up were measured twice by a blinded single observer for linear wear (head penetration) in a single image analysis. Four computer assisted wear measurement methods were compared, the commercially available Martell Hip Analysis suite 7.14 and Rogan Hyperview, a not yet available Rogan beta-version called View Pro-X and Roman v1.70, freely available software to download from the internet. While both Rogan software can read the DICOM format from the hospital image server, images had to be converted for Martell (greyscale TIFF only) and Roman (any format).

The annual wear rates were compared and intra-observer variability was calculated as the difference between both measurements (precision). The average time it takes to measure one image (without format conversions) was documented and practicality of daily clinical use was evaluated.

Results: The annual wear rates measured were (mean +/− SD): Martell=0.09+/−0.21,, Hyperview=0.14 +/−0.10, Pro-X=0.12+/−0.07 Roman=0.12 +/−0.06. Martell was the only method measured negative wear (7/24 cases).

The precision was (mean +/− SD): Martell = 1.74+/−1.53, Hyperview = 0.36 +/−0.92, Pro-X = 0.10+/−0.11 Roman = 0.08 +/−0.08.

The average measuring time per image was: Martell = 94s, Hyperview = 94s, Pro-X = 92s Roman = 158s.

Discussion: The Roman method is the most precise and easiest to use in daily practice, but takes the longest time to measure. The Rogan View Pro-X software is nearly as precise and easy to use but not on the market yet. It is an improvement over the Hyperview which looses precision by using a elliptical interpolation necessary for non-metal backed cups instead of circular interpolation which is more precise for metal backed cups. The Mar-tell method produced the intolerable low precision and in some cases “negative wear”. Only on large patient groups it may produce realistic average wear rates. We found out that the Martell edge detection method, originally developed for scanned analogue x-rays, functions inferiorly with digital images, the coming hospital standard. Image processing (smoothening) of the digital x-rays did increase accuracy and precision. We recommend the Roman software, a digital version of the Livermore method, for precision, ease of use and cost.

Introduction: In uncemented total hip arthroplasty (THA) stem sizing and stem insertion affect the fit and fill of the prosthesis in the medullary canal. This study investigates how tightness of the stem fit influences bone remodelling and if there is a correlation between radiological and clinical Results: Methods: In a retrospective study a consecutive series of 64 patients following uncemented THA with a proximally coated anatomic stem (ABG-II, Stryker) was followed-up for 5 years using the Merle d’Aubigne (MdA) clinical score. Radiographic analysis of bone remodelling features per Gruen zone (R1 to R7) was performed on AP and lateral x-rays at 5 years. Femoral fit was measured at three levels (proximal, mid-stem, distal) on the direct postop x-ray using the femoral fit ratio (f) of Kim and Kim (tight femoral fit: f≥0.8, non-tight: f< 0.8). The medullary canals were categorised according to Noble (normal, stove pipe, champagne flute). Bone remodelling was compared to literature values of the ABG-I stem and correlated to clinical findings.

Results: The MdA improved from 9.6 pre-op to 17.1 at 5 years with no difference between tight and non-tight implants. Lateral thigh pain (LTP) occurred in 10/64 cases (3 requiring medication). Patients with LTP had significantly lower proximal (0.75 vs 0.80) and distal fit & fill (0.72 vs 0.79. LTP was equally frequent with a normal or varus position.

Proximal bone resorption occurred in 27% (R1) or 34% (R7) which is lower than the values reported for the ABG-I stem (R1: 48%, R7: 45%). Bone resorption was significantly higher with tight than non-tight mid-stem fit (69% vs 27%, p=0.04). The same trend was true for tight distal fit (56% vs 37%).

Cancellous densifications were frequent at mid-stem level (R2: 83%, R6:88%) but much less distally (R3: 44%, R5:25%). No influence of fit & fill was measured.

Cortical densifications were noted in 16% (ABG-I 15%) overall with a higher proportion measured for tight distal fit (25%) than loose distal fit (6%, p=0.07). A similar observation was made for cortical thickening (11% overall, tight:non-tight=16%:6%). Pedestal formation (17% overall) was more likely with a non-tight proximal fit (23% vs 12%) and mid-stem fit (20% vs 8%)

A proximal tight fit was achieved more frequently with normal (55%) and stovepipe femora (50%) than champagne flute femora which had the highest proportion of tight distal fit (85%).

Discussion: At 5 years femoral implant fit influenced bone remodelling reactions which are in agreement with the design philosophy of proximally press-fitting anatomic stems. However, implant fit could not be correlated to clinical outcome yet. This may require a longer follow-up.

As LTP occurred with non-tight fit it seems that elastic mismatch is not the main cause.

Less proximal bone resorption and less distal densifications confirm the design changes from ABG-I to ABG-II.

INTRODUCTION: In total knee arthroplasty (TKA) it still remains undecided whether the patella should be resurfaced or not. This study used two accelerometer based motion analysis systems to study if functional tests are able to detect a difference in patients with or without a resurfaced patella.

METHOD: Retrospective study of a cohort of 53 unilateral TKA patients (Stryker Scorpio). With one surgeon always resurfacing and the other one routinely retaining the patella, patients were divided into a resurfaced group (RS, n=31) and a non-resurfaced group (NR, n=22).

Patients were clinically assessed for 2 years using the Knee Society Score (KSS). At final follow-up patients were assessed once using two accelerometer based motion tests (Dynaport Knee Test and Minimod Gait Test; McRoberts, Netherlands). The knee score is composed of four sub scores (Locomotion, Rise & Descend, Transfers, Lift & Move). The gait test records walking parameters such as step frequency, length and speed plus various parameters of step asymmetry, irregularity and efficiency. Statistical analysis was performed using the van Elteren’s test (KSS data) and a stratified regression analysis (Dynaport and Minimod data)

RESULTS: The mean pre-op KSS was not different between the groups (RS=42.7+/−16.5, NS=50.5+/−13.8, p=0.08). Differences remained non-significant post-op at three months (RS=42.7+/−16.5, NS=50.5+/−13.8, p=0.08), at final follow-up (RS=42.7+/−16.5, NS=50.5+/−13.8, p=0.08) and regarding total improvement (RS=8.7, NS=5.1, p=0.29).

The Dynaport knee test showed a significant functional advantage for patella resurfacing (RS=44.1+/−12.1, NR=39.7+/−19.2, p=0.04). The sub score Rise & Descend showed the largest advantage for patella resurfacing (RS=44.7, NR=39.7, p=0.04). The other sub scores also favored resurfacing but were not significant. The Minimod Gait test favoured RS in most parameters but at non-significant levels.

DISCUSSION: Using the KSS it was not possible to identify resurfacing or retaining the patella as the superior choice in TKA. However, using performance based tests it was possible to measure significant differences in favour of patella resurfacing but only when the motion tasks were most demanding and depending on patella-femoral function such as during Rise & Descend (stair climbing, slope walking, stepping onto blocks). This indicates a relevant functional benefit of patella resurfacing for the patient. Functional parameters derived from less demanding tasks such as normal gait (Mini-mod) could not verify this benefit.

The advantage of patella resurfacing may be less due to pain relief but due to a functional benefit during demanding motion tasks for which standard clinical scores and low demanding tests do not account for sufficiently and objectively enough. We recommend complementing the classic evaluation tools with demanding functional tests.

Introduction: Investigating the correlations between bone ongrowth and HA resorption on coated implants is important to understand the contribution of resorbable coatings on implant fixation and periprosthetic bone remodelling. It is only possible histomorphometrically and this study measured bone apposition and residual HA on hip stems of one single design.

Methods: Post-mortem retrievals of 13 ABG-I (Stryker) hip stems from 13 patients (10f, 3m, age: 58–86yrs, uneventful THA, death unrelated to hip diseases). The time from implantation (stem in-vivo) ranged between 3.3 to 11.2yrs.

Three cross sections were cut from the metaphyseal femur and surrounding bone proximal to Gruen zones 2 and 6 (regions with HA coating). The three sections were A (proximal), B (mid-part) and C (distal). Sections were prepared using the Donath technique and then paragon stained for quantitative histomorphometry using an Axioskop microscope (Carl Zeiss, Germany) with image analysing (SAMBA, France).

For each segment the total implant perimeter, percentage of implant perimeter covered by bone and the total percentage of residual HA coating were measured. Bone implant contact was defined as direct ongrowth of bone to the coating or the titanium surface.

Results: HA resorption increased significantly with the time in-vivo as measured by the residual HA (e.g. < 6yrs: Avg.=36.7%, > 6yrs: Avg.=10.1%, p=0.02). This correlation was true for all sections A, B and C (p=0.02–0.03). Beyond 8yrs HA was almost gone.

Bone ongrowth ranged between 18%–56% and was independent of the time in-vivo. Bone ongrowth was most strongly correlated to patient age with younger patients having significantly higher bone ongrowth (p=0.001). Bone ongrowth was correlated with HA-resorption only in the most proximal zone A (p=0.001) with lower ongrowth associated with lower levels of residual HA. However, HA resorption was not significantly correlated with patient age.

HA resorption was significantly higher most proximally with less residual HA (13.0%) than mid-stem (22.6%, p=0.05) and distal (28.1%, p=0.05). Metaphyseal stem level and bone ongrowth were not significantly correlated in this manner.

Discussion: HA resorption increased with implantation time and was nearly completed at 8yrs. As bone ongrowth was independent of time in-vivo and independent of HA resorption on the mid-part and distal coated stem sections there is evidence that long term implant fixation is not diminished while the HA coating is being resorbed.

Bone ongrowth but not HA resorption was strongly correlated to patient age indicating that the bone remodelling process is more affected by individual bone health than it can be stimulated by HA coating.

HA resorption increased significantly from the distal to mid-stem and the most proximal coating level in the same way as stress shielding and thus osteoclastic stimulation goes up.

We have compared four computer-assisted methods to measure penetration of the femoral head into the acetabular component in total hip replacement. These were the Martell Hip Analysis suite 7.14, Rogan HyperOrtho, Rogan View Pro-X and Roman v1.70. The images used for the investigation comprised 24 anteroposterior digital radiographs and 24 conventional acetate radiographs which were scanned to provide digital images. These radiographs were acquired from 24 patients with an uncemented total hip replacement with a follow-up of approximately eight years (mean 8.1; 6.3 to 9.1). Each image was measured twice by two blinded observers. The mean annual rates of penetration of the femoral head measured in the eight-year single image analysis were: Martell, 0.24 (SD 0.19); HyperOrtho, 0.12 (SD 0.08); View Pro-X, 0.12 (SD 0.06); Roman, 0.12 (SD 0.07). In paired analysis of the six-month and eight-year radiographs: Martell, 0.35 (SD 0.22); HyperOrtho, 0.15 (SD 0.13); View Pro-X, 0.11 (SD 0.06); Roman, 0.11 (SD 0.07). The intra- and inter-observer variability for the paired analysis was best for View Pro-X and Roman software, with intraclass correlations of 0.97, 0.87 and 0.96, 0.87, respectively, and worst for HyperOrtho and Martell, with intraclass correlations of 0.46, 0.13 and 0.33, 0.39, respectively.

The Roman method proved the most precise and the most easy to use in clinical practice and the software is available free of charge. The Martell method showed the lowest precision, indicating a problem with its edge detection algorithm on digital images.

Introduction. Periprosthetic femoral fractures (PPF) have become more common as the population at risk, patients with joint arthroplasty, has increased. The choice of treatment depends on the location of the fracture relative to the implant, the residual fixation of the implant and patient factors such as deficient bone stock or osteopenia. The Vancouver classification categorises types of PPF and identifies strategies for its management. However, the Vancouver classification is mainly based and focused on cemented implants. Recently a modified algorithm for the management of PPF based on the Vancouver classification has been published. We analysed PPF with a single type of uncemented hip stem and compared our treatment to the most recent management algorithm.

Methods. From a consecutive series of 619 uncemented proximal hydroxyapatatite coated ABG-I prostheses, 14 patients (2.3%) sustained a PPF after an adequate trauma. The mean time between the index operation and the fracture was 6.9 years(range: 2.0 to 13.7 years). The mean age of the patients at the time of fracture was 79 years (range 59–87). The fracture patterns and state of stem fixation were analysed.

Results. In 5 patients the fracture was limited to the proximal Gruen zones 1 and 7 with the stem still firmly fixed (type A). Fracture treatment was conservative but in one patient the greater trochanter had to be reat-tached. Six B1,two B2 fractures and one B3 fracture were seen. Compared to the Vancouver classification we observed a different pattern in the type B fractures. No fractures at the tip of the stem were seen as common and characteristic in cemented implants. Three B1 fractures were operated due to fracture displacement and three were treated conservately. THe B2 and B3 fractures were managed with long uncemented revision stems because of a disrupted bone-prosthesis interface. Type C fractures were not seen. All fractures healed well.

Conclusion. The ABG-I shows a bone remodelling pattern consisting of mid stem bone condensation and proximal bone resorption, which leads to a high bone density gradient. This gradient acts as a stress riser and thus can be a preferred location for the initiation of a fracture. This pattern is distinctly different from the fracture types observed for cemented implants. . As a result the ABG-I stem was modified to the ABG-II design permitting more proximal and less mid-stem load transfer, smoothening the bone density gradient.

This study confirms that the Vancouver classification and the modified algorithm for the management of PPF are a simple,reproducible classification system also for the uncemented treatment modality. Conservative treatment is a valid option in case of a stable implant, while in case of a loose implant surgical intervention is mandatory.

Introduction: After total hip arthroplasty (THA) the periprosthetic bone is loaded in an unphysiological manner (stress shielding), a major cause for periprosthetic bone resorption and aseptic loosening. Design, material and surface properties of the implant influence the stress shielding effect. This study investigates whether the design changes from the successful ABG-I to the ABG-II stem can be verified in perioprosthetic bone remodelling using Dual-Energy X-ray Absorptiometry (DEXA).

Methods: 51 THA patients (22f, 29m, avg. age: 60.8 years) were randomised to either ABG-I or ABG-II. DEXA measurements were performed preoperatively and 10 days (baseline), 3 weeks, 3, 6, 12 and 24 months postoperatively using standard Gruen zone analysis. At the same time clinical Merle d’Aubigne (MdA) scores were measured. Changes in bone mineral density (BMD) were expressed as percentage changes from the baseline for each of the Gruen zones (R).

Results: The average MdA score (25 ABG-I, 26 ABG-II) increased from 10.3 preoperatively to 17.3 at 24 months postoperative. The improvement was higher for ABG-II (7.5) than ABG-I (6.5) but not significant (p=0.15). During the first three postoperative months the average BMD of all zones combined dropped steeply for both the ABG-I (−5.5%) and ABG-II (−4.5%, n.s.). Beyond 3 months, the overall BMD change (zones combined) continued to develop without significant difference between both implant designs (plateau and slight recovery) but the individual zones showed distinct differences. The average BMD loss in the proximal Gruen zones was much lower for ABG-II (R1: −7.9%, R7: −3.7%) than for ABG-I (R1: −9.3%, R7: −11.9%) while distally the situation was reversed with better bone preservation for the ABG-I (R3: −2.9%, R4: −1.5%, R5: −1.7%) than for the ABG-II (R3: −6.0%, R4: −2.8%, R5: −4.6%). In the mid-stem region a transitional area was identified with better bone preservation for ABG-II in Gruen zone 6 (+2.7% vs −1.4%) and for ABG-I in Gruen zone 2 (-4.9% vs 7.9%). However, the p-values (two-sided t-test) ranged from 0.05–0.35 at statistically non-significant levels.

Discussion: The steep initial bone loss for both stem designs and all Gruen zones combined indicates that during this early postoperative phase surgical trauma and reduced loading dominate the bone remodelling process and not the type of implant. The different development of proximal and distal BMD for ABG-I and II in the period thereafter demonstrates the long-term effect of implant design verifies the design improvements (less proximal stress shielding). A parallel study identified the dominant influence of preoperative BMD on BMD loss. This explains our high standard deviation and the lack of statistical significance. The study is now expanded with patients matched for preoperative BMD.

Introduction: The Stryker ABG-I Total Hip Arthroplasty system with a Hydroxyapatite coated stem and cup has shown very promising short and mid-term clin-cial results at 2, 5 and 8 years. However, large discrepancies in component survival of the stem and cup have recently been published and require more data and further investigation about the potential causes.

Methods: All peer reviewed publications on the survival of the ABG-I hip prosthesis (9) were analysed regarding clinical results, polyethylene (PE) wear, osteolysis and survival. Own results from the first 250 consecutive ABG-I hips with a long-term follow-up of 10–15 years were added and compared.

Results: In the literature excellent survival rates of the ABG-I stem against osteolysis and aseptic loosening were reported with values ranging between 98%–100% after 5–10 years. In our own series stem survival against aseptic loosening was 100% at 10 years. No radiographic evidence of distal linear lysis was found around any stem. This was confirmed also in a histological investigation.

For the ABG-I cup the literature review gave survival rates between 59%–97% after 8–10 years. In our own study cup survival was 97.4% at 10 years. Looking at PE-wear, the literature gave average wear rates ranging from 0.24 to 0.32mm/year, values clearly above the wear rate boundary of 0.10–0.15mm/year usually considered as critical. In our own study augmented PE-wear (> 0.15mm/year) was noted in 23.6% of all implants. The majority (77%) of these implants were from patients younger than 70 years although this group only represented 57% of the total. The revision rates at 10 years reflect a similar trend with values much higher for patients below 70 years (2.8%) than above(4.9%).

Conclusions: Stem survival in our series was high, comparable to other published series and above the golden standard (cemented Charnley). However, the ABG-I cup showed lower survival rates, elevated PE-wear and augmented osteolysis around the holes. The comparatively high cup survival of our study is partly due to the high proportion of older patients. In the younger patient group PE-wear and revision rates were elevated. PE-wear is multifactorial and depends mainly on use. Some studies speculate it might be accelerated by low PE quality, crosslinking, liner fit or thickness. We found osteolysis not mainly at the rim but mostly around the 12 holes of the metal backed cup pointing at a possible pathway for wear particle migration into the reamed acetabulum as reported for other holed designs (Harris-Galante, Universal, Duraloc). As high wear and cyst formation did not always correlate it seems as if the pumping effect between flexing cup and acetabulum varies with component size, anatomy and bone quality influencing fluid flow, particle migration and osteolytic stimulus. A non-hole cup could alleviate this potential problem.

Introduction: In total hip arthroplasty (THA) polyethylene (PE) wear debris is major cause of osteolysis and aseptic implant loosening. Wear particle volumes must be reduced to increase implant survival. Various ways of crosslinking the molecular chains of PE have been proposed to increase the wear resistance of the bearing material but prospective long-term follow-up studies are scarce.

Materials & Methods A crosslinked PE acetabular insert was developed by gamma irradiating in a nitrogen atmosphere at a dose of 3MRad and subsequent annealing at 50° C for 144 hours to promote further crosslinking (“Duration” process). The Duration PE was compared to a conventionally prepared PE insert (irradiated at 3 MRad in air, no annealing) in a series of small punch tests, a hip wear simulator study and in-vivo as part of a randomized double-blind clinical study at three medical centers the PE-insert being the only variable. A total of 127 patients with 133 inserts (67 conventional, 66 Duration) were followed up between three and five years post-operatively. Wear was measured yearly by using a computer-based image analysis system. Radiographic appearance of potentially wear related phenomena such as osteolysis or loosening was assessed by an independent reviewer.

Results: Higher load at break during the small punch test confirmed the elevated crosslinking levels of Duration PE against the conventional PE. In the joint simulator Duration PE showed significantly lower volumetric wear rates (Mean SD: 21.7 2.3 mm3/10E6 cycles) than conventional PE (39.7 1.5 mm3/10E6 cycles, p< 0.05). A corresponding and significant level of wear reduction for the Duration PE was identified in-vivo (Duration: 43.7 33.6 mm3/year, conventional: 60.4 42.7 mm3/year, p=0.04). Radiographic analysis at the last follow-up gave evidence of femoral osteolytic lesions in five hips with conventional PE inserts and only one hip with a Duration insert.

Conclusions: Acetabular inserts made of crosslinked PE using the Duration process can significantly reduce in-vivo wear rates and the occurrence of potentially wear related osteolytic effects in the long-term follow-up of THA patients. The reduced clinical wear rates corresponded well with the results from the wear simulator measurements. This suggests that a PE with further increased crosslinking which shows even lower wear rates in simulator studies will lead to even lower wear and associated osteolysis in long-term clinical application.

Introduction: In total knee arthroplasty (TKA) it remains a topic if cementless designs offer long-term stability equivalent to cemented procedures and if the components should be coated with calciumphosphate to enhance fixation. This study compares the three-dimensional migration patters of cemented and uncoated and periapatite (PA) coated tibial trays during a 2-year clinical follow-up study using roentgen stereophotogram-metric analysis (RSA) measurements as a predictor of long-term implant loosening (Ryds definition).

Methods: A double blind randomized prospective study was performed on 101 osteoarhtritic patients receiving 115 Duracon TKA. The tibial tray was either cemented (25), uncoated and uncemented (46) or PA-coated and uncemented (44). The groups were matched for sex, age, BMI and pre-op Insall score. Patients were evaluated at 1 week, 3, 6, 12 and 24 months post-operatively using standard radiographs and Insall scores. At each evaluation RSA measurements determined the translational (medial-lateral (ML), caudal-cranial (CC), anterior-posterior(AP)) and rotational (anterior tilt, external and valgus rotation) displacements of the tibial tray.

Results: Insall scores were not statistically different between the groups. Average component displacement was low for the cemented components in all directions. For the uncemented trays migration was highest in the CC direction (subsidence) and steep during the first 6 weeks. At two years the uncoated trays showed significantly more subsidence (−0.5 0.63 mm, range: −2.1 to 0.5 mm) than the cemented components (0.1 0.17 m, range: −0.2 to 0.4 mm, p< 0.05) and the PA-coated group (−0.1 0.60 mm, range: −2.8 to 0.3 mm, p< 0.05). Average subsidence of the cemented and PA-coated implants was nearly the same but variability was higher for the coated trays (p=0.01). Displacements in all other directions were not significantly different between the groups. Using Ryds definition, a total of 10 tibial trays from the cemented group (40%), 29 trays from the uncoated group (63%) and 11 trays from the PA-coated group (26%) were identified to be at risk for long-term loosening. In seven cases (all cemented) component tilt was critical.

Conclusion: At 2 years no clinical differences were found between cemented, uncoated and PA-coated tibial trays. However, RSA measurements showed significantly different migration patterns and predictions for long-term implant stability. Steep initial subsidence before stabilisation seems an inherent characteristics of uncemented fixation. In contrast, the cement layer below cemented trays can lead to AP tilt. Uncoated uncemented components migrate significantly indicating a high risk of late loosening. PA-coating reduces tray migration and the risk of long-term failure to levels equivalent to cemented fixation.