Our understanding of pre-arthritic hip disease has evolved tremendously but challenges remain in categorizing diagnosis, which ultimately impacts choice of treatments and clinical outcomes. This study aims to report patient reported outcome measures (PROMs) comparing four different condition groups within hip preservation surgery by a group of fellowship-trained surgeons.

From 2018 to 2021, 380 patients underwent hip preservation surgery at our center and were classified into five condition groups: dysplasia: 82 (21.6%), femoro-acetabular impingement (FAI): 173 (45.4%), isolated labral tear: 103 (27.1%), failed hip preservation: 20 (5.3%) and history of childhood disease/other: 2 (0.5%). International hip outcomes Tool 12 (IHOT-12), numeric pain score and patient-reported outcomes measurement information system (PROMIS) were collected pre-operatively and at 3 months and 1 year post-operatively, with 94% and 82% follow-up rate respectively.

Arthroscopy (75.5%) was the most common procedure followed by peri-acetabular osteotomy (PAO) (22.4%) and surgical dislocation (2.1%). Re-operation rate were respectively 18.3% (15), 5.8% (10), 4.9% (5), 30% (6) and 0%. There were 36 re-operations in the cohort, 14 (39%) for unintended consequences of initial surgery, 10 (28%) for mal-correction leading to a repeat operation, 8 (22%) progression of arthritis, and 4 (11%) for incorrect initial diagnosis/intervention. Most common re-operations were hardware removal 31% (7 PAO, 3 surgical hip dislocation and 1 femoral de-rotational osteotomy), arthroscopy 31% (11) and arthroplasty 28% (10). All groups had significant improvements in their IHOT-12 as well as PROMIS physical and numerical pain scales, except those with failed hip preservation. Dysplasia group showed a slower recovery.

Overall, this study demonstrated a clear relation between the condition groups, their respective intervention and the significant improvements in PROMs with isolated labral pathology being a valid diagnosis. Establishing tertiary referral centers for hip preservation and longer follow-up is needed to monitor the overall survivorship of these various procedures.

Aims

The primary aim of this study was to determine the ten-year outcome following surgical treatment for femoroacetabular impingement (FAI). We assessed whether the evolution of practice from open to arthroscopic techniques influenced outcomes and tested whether any patient, radiological, or surgical factors were associated with outcome.

Short cementless femoral stems are increasingly popular as they allow for less dissection for insertion. Use of such stems with the anterior approach (AA) may be associated with considerable per-operative fracture risk. This study's primary aim was to evaluate whether patient-specific femoral- and pelvic- morphology and surgical technique, influence per-operative fracture risk. In doing so, we aimed to describe important anatomical thresholds alerting surgeons.

This is a single-centre, multi-surgeon retrospective, case-control matched study. Of 1145 primary THAs with a short, cementless stem inserted via the AA, 39 periprosthetic fractures (3.4%) were identified. These were matched for factors known to increase fracture risk (age, gender, BMI, side, Dorr classification, stem offset and indication for surgery) with 78 THAs that did not sustain a fracture. Radiographic analysis was performed using validated software to measure femoral- (canal flare index [CFI], morphological cortical index [MCI], calcar-calcar ratio [CCR]) and pelvic- (Ilium-ischial ratio [IIR], ilium overhang, and ASIS to greater trochanter distance) morphologies and surgical technique (% canal fill). Multivariate and Receiver-Operator Curve (ROC) analysis was performed to identify predictors of fracture.

Femoral factors that differed included CFI (3.7±0.6 vs 2.9±0.4, p<0.001) and CCR (0.5±0.1 vs 0.4±0.1, p=0.006). The mean IIR was higher in fracture cases (3.3±0.6 vs 3.0±0.5, p<0.001). % Canal fill was reduced in fracture cases (82.8±7.6 vs 86.7±6.8, p=0.007). Multivariate analysis and ROC analyses revealed a threshold CFI of 3.17 was predictive of fracture (sensitivity:84.6% / specificity:75.6%). Fracture risk was 29 times higher when patients had CFI>3.17 and II ratio>3 (OR:29.2 95%CI: 9.5–89.9, p<0.001).

Patient-specific anatomical parameters are important predictors of fracture-risk. When considering the use of short stems via the AA, careful radiographic analysis would help identify those at risk in order to consider alternative stem options.

Aims

In computer simulations, the shape of the range of motion (ROM) of a stem with a cylindrical neck design will be a perfect cone. However, many modern stems have rectangular/oval-shaped necks. We hypothesized that the rectangular/oval stem neck will affect the shape of the ROM and the prosthetic impingement.

Aims

The aim of the current study was to assess the reliability of the Ottawa classification for symptomatic acetabular dysplasia.

Osteochondroplasty procedure for cam deformity provides excellent outcomes on alleviating pain, improving quality of life and clinical function in femoroacetabular impingement syndrome (FAIS) patients. Although medium-term outcomes on gait biomechanics have been reported, it is unclear how it would translate to better hip muscle forces and joint loading in high range of motion tasks. The purpose of this study was to compare the muscle forces and hip joint contact forces (HCF) during a squat task in individuals before and after cam-FAIS surgical correction. Ten cam-FAIS patients prior and 2-years after osteochondroplasty, and 10 BMI- age- and sex-matched healthy control participants (CTRL) underwent 3D motion and ground reaction forces capture while performing a deep squatting task. Muscle and HCF were estimated using musculoskeletal modeling and comparisons were done using statistical parametric mapping (SPM).

Postoperatives squatted down with a higher anterior pelvic tilt and higher hip flexion compared with the preoperatives. Preoperative semimembranosus generated lower forces than the two other groups on the squat ascending, with no differences detected between post-ops and CTRLs. Preoperatives also showed reduced forces for the distal, ischial and medial portions of the adductor magnus relative to the CTRLs, which although reduced, still presented differences postoperatively. Preoperative anterior and medial contact forces were significantly lower than the CTRL group during both phases of the squat. Postoperative vertical and medial forces were also lower compared to the CTRLs. However, with higher vertical forces during the ascent phase of the squat compared to the preoperative, the postoperative group, significantly increased its HCF magnitude. A higher anterior pelvic tilt was associated with an innate restoration of the pelvis position, once the cam deformity no longer existed. The increased force of the semimembranosus muscle while ascending the squat generated higher vertical HCF, which also influenced the increased HCF total magnitude.

For any tables or figures, please contact the authors directly.

Introduction

Porous coated cups have a low modulus of elasticity that enhances press-fit and a surface that promotes osseointegration as well as permitting modularity. Monoblock ceramic acetabular cups represent a subtype of uncemented cup permitting the use of large femoral heads. The aim of this study was to compare the short-term clinical and radiographic performances of both cups.

Background

Hip dysplasia has traditionally been classified based on the lateral center edge angle (LCEA). A recent meta-analysis demonstrated no definite consensus and a significant heterogeneity in LCEA values used in various studies to define hip dysplasia and borderline dysplasia. To overcome the shortcomings of classifying hip dysplasia based on just LCEA, a comprehensive classification for adult acetabular dysplasia (CCAD) was proposed to classify symptomatic hips into three discrete prototypical patterns of hip instability; lateral/global, anterior, or posterior. The purpose of this study was to assess the reliability of this recently published CCAD.

Objectives

To quantify and compare peri-acetabular bone mineral density (BMD) between a monoblock acetabular component using a metal-on-metal (MoM) bearing and a modular titanium shell with a polyethylene (PE) insert. The secondary outcome was to measure patient-reported clinical function.

Purpose

The importance of femoral head-neck morphology in the development of early hip osteoarthritis is recognized in femeroacetabular impingement (FAI), however no studies have examined FAI morphology in the developing hip, i.e. pre-closure of the proximal femoral physis. We developed a pilot project to study prevalence of CAM-type FAI hip morphology in both the pre- and post-closure proximal femoral physes of asymptomatic children using MR-imaging. We also examined biologic markers possibly related to FAI etiology, including Vitamin D metabolites, BMI, family history, and activity levels.

Purpose

The purpose of the study was to determine the rate of conversion from RSA to THR in a number of Canadian centers performing resurfacings

Purpose

Primary uncemented total hip arthroplasty is the fixation of choice for most patients undergoing hip replacement in North America. Initial stem stability will be detected by the fit and fill of the implant to the bone as well as the overall stem geometry as it relates to its mechanical stability. This study aims to determine the geometric and structural parameters of common cementless tapered femoral stems to better understand their early clinical performance with respect to bony fixation.

Purpose

Use of a large femoral head metal-on-metal bearing in total hip arthroplasty may offer an advantage in terms of dislocation rates and more natural joint kinematics. The acetabular component is more rigid however in these prostheses and if not placed accurately can lead to increased levels of metal ion release. A prospective randomized controlled trial was conducted to quantify bone mineral density on the acetabular side, as well as compare metal ion levels from a standard metal-on-polyethylene bearing to a large head metal-on-metal bearing in primary total hip arthroplasty.

Purpose

Transfusion rates after primary total hip has been reported up to 39.2%. The purpose of our study was to evaluate the efficacy of TXA in minimizing risk of allogeneic blood transfusion after primary total hip and hip resurfacing arthroplasty.

The renewed interest in the clinically proven low wear of the metal-on-metal bearing combined with the capacity of inserting a thin walled cementless acetabular component has fostered the reintroduction of hip resurfacing. As in other forms of conservative hip surgery, i.e. pelvic osteotomies and impingement surgery, patient selection will help minimize complications and the need for early reoperation.

Femoral neck fractures remain the leading cause of early failure after metal-on-metal hip resurfacing. Although its' exact pathomechanism has yet to be fully elucidated, current retrieval analysis has shown that either an osteonecrotic event and/or significant surgical trauma to the femoral head neck junction are the leading causes. It is most likely that no single factor like patient selection and/or femoral component orientation can fully avoid their occurrence. As in osteonecrosis of the native hip joint, a certain cell injury threshold may have to be reached in order for femoral neck fracture to occur. These insults are not limited to the surgical approach, but also include femoral head preparation, neck notching, and cement penetration.

Although some have argued that the posterior approach does not represent an increased risk fracture for ON after hip resurfacing because of the so-called intraosseous blood supply to the femoral head, to date, the current body of literature on femoral head blood flow in the presence of arthritis has confirmed the critical role of the extraosseous blood supply from the ascending branch of the medial circumflex, as well as the lack of any substantial intraosseous blood supply. Conversely, anterior hip dislocation of both the native hip joint as well as the arthritic hip preserves femoral head vascularity. The blood supply can be compromised by either sacrificing the main branch of the ascending medial femoral circumflex artery or damaging the retinacular vessels at the femoral head-neck junction. Thus an approach which preserves head vascularity, while minimizing soft tissue disruption would certainly be favorable for hip resurfacing. This presentation will review the current state of knowledge on vascularity of the femoral head as well as surgical techniques enhancing its preservation.

Purpose: The Quality of Recovery-40 questionnaire (QoR-40) has been developed, validated and extensively used to assess the quality of life of patients following major surgery. It is composed of 40 questions answered by the patient and organized into six dimensions: emotional state, physical comfort, psychological support, physical independence, pain, and global score. However, this questionnaire has not been validated in an orthopaedic population. The objective of the study was to assess the psychometric properties of the QoR-40 in a population of patients undergoing total knee or hip arthroplasty.

Method: Sixty seven patients undergoing total knee arthroplasty and 65 patients undergoing total hip arthroplasty were recruited. Patients were assessed with the QoR-40 and the SF-12, a validated generic quality of life questionnaire, at the following seven times: three and one week pre-operative; one, two and three days post-operative (short-term); one and three months post-operative (long-term). The following psychometric properties of the QoR-40 were assessed: reliability between three and one week pre-operative using intra-class correlation coefficients (ICC), construct validity with the SF-12 using Pearson product moment correlations, responsiveness to change using effect sizes, floor and ceiling effects, and predictive validity of short-term QoR-40 scores of long-term SF-12 scores.

Results: All dimensions and global scores of the QoR-40 appeared reliable, with ICCs’ ranging from 0.75 to 0.84. For construct validity, physical dimension scores of the QoR-40 (physical comfort, physical independence, pain) were weakly or not significantly related to the physical component scale of the SF-12 (−0.09 to 0.34), except for long-term where the correlations were moderate (0.35 to 0.62). The emotional state score of the QoR-40 was moderately to substantially related to the mental component scale of the SF-12 for all periods (0.40 to 0.78). Effect sizes were higher for the QoR-40 when compared to the SF-12 in the intervals of the first month, while they were higher for the SF-12 in the intervals above one month. The QoR-40 demonstrated ceiling effects for the physical independence dimension pre-operatively and three months post-operatively, and for all periods for the psychological support dimension. As for predictive validity, short-term post-operative QoR-40 scores were weakly or not significantly predictive of long-term postoperative SF-12 scores (0.01 to 0.41).

Conclusion: The QoR-40 appears to be a reliable tool assessing a quality of life construct different from the SF-12 and more responsive to change during the short-term follow-up to surgery. The QoR-40 could be used to assess short-term quality of life following surgery. The QoR-40 should not be used to predict long-term quality of life. To further improve the tool, the psychological support dimension of the QoR-40 should be reconceptualized because of ceiling effects.

Purpose: Recently, there has been concern raised on the occurrence of pseudotumors after metal on metal hip resurfacing. A pseudotumor is defined as a local soft tissue mass associated with localized bony and/or tissue (muscle) destruction. The primary purpose of this study is to determine the incidence of this complication in several high volume Canadian academic centres.

Method: Nine of the 11 Canadian academic centres who perform metal on metal hip resurfacings were surveyed. The number of metal on metal hip resurfacing arthroplasties performed at each centre was first determined, as were the number of those who have presented with a pseudotumour, and subsequently gone on to revision surgery. The basic demographics of the group were recorded, as were the radiographic and implant design variables for those cases presenting with a pseudotumour.

Results: A sample of 3,400 hip resurfacing arthroplasties performed between 2002 and December 2008 were surveyed. Demographics were tabulated for a sub-sample of these patients. 76% were male, the mean length of follow-up was 3.02 years, mean BMI was 28.65, and mean age was 52.10 years. Three of 3,400 cases presented with a pseudotumour, an incidence of .09%.

Conclusion: Although pseudotumors remain a concern after metal on metal hip resurfacing, the incidence at short to mid term follow-up is very low in this multi-centre academic survey. This information is significantly lower than what other groups have recently reported. Continued close monitoring is required in order to determine what clinical factors are at play.

Purpose: Although femoral neck fractures remain a concern in terms of short term failures for hip resurfacing, acetabular component position and fixation are increasingly being recognized as causes of mid term failures for hip resurfacing. The purpose of our study was to evaluate the migration pattern of a cementless acetabular component for a metal on metal hip resurfacing.

Method: Between January 2006 and June 2007, 130 patients underwent metal on metal hip resurfacing; 66 hips in 60 patients were included in this analysis. Forty-eight patients were male and 12 were female, with a mean age of 50 (range, 32–66). Ninety-five percent of the surgeries were performed for osteoarthritis. All surgeries were performed by two surgeons using the Conserve Plus (Wright Medical Technology, Memphis, TN) hip resurfacing system. The acetabular component is a monoblock cobalt chrome with a porous beaded surface for osteointegration. In all cases acetabular migration was measured both vertically and horizontally, on serial radiographs using the computer-assisted Ein Bild Röntgen Analyse (EBRA) method. A minimum of three comparable radiographs is necessary for calculating the migration curves. We scored medial migration as negative horizontal movement.

Results: At a mean follow up 25.3 months (range, 24–36 months), each hip had an average of 5.1 radiographs for analysis. The software excluded two cases for poor comparability ending finally with 64 cases for the analysis. Eighty-seven point five per cent of the cups showed less than 1 mm migration in the medium-lateral axis and 54.7% less than 1 mm in the vertical axis. Seventy-seven percent of the cups showed a combined migration of less than 2 mm in the observation period, without radiolucencies, leaving 23% of the acetabular components with 2 mm or greater of component migration. One of these cases required revision for aseptic loosening at 34 months.

Conclusion: In our study the majority of the acetabular components were stable with some of the migration observed secondary to lack of complete initial seating due to the rigidity of the shell. Krismer et al did report on the migration of the PCA shell (also a porous beaded cobalt-chrome shell) using EBRA, with 27.5% of the shells demonstrating > 1 mm of migration. Although hip resurfacing has only mid term followup, results have been good to excellent. Caution should still be maintained since the higher frictional torque generated by the larger femoral head size as well as the nanometer size particles could negatively affect long term fixation of the acetabular component.

Purpose: The surgical correction of FAI deformity is a well accepted treatment in patients presenting with hip pain with associated labral-chondral damage. The anterior approach with assisted hip arthroscopy provides access to the anterior head-neck junction with potentially quicker recovery for patients. The purpose of this study is to present the safety and efficacy of this approach in performing impingement surgery.

Method: Forty-eight Hueter procedures were performed in 45 patients (13 males and 32 females). Mean age was 42.09 years (range, 21–65 years), and mean BMI was 24.31(range, 21–33). The scope was performed first to deal with intra-articular damage. All patients were diagnosed with CAM type FAI with labral pathology based on MRI arthrogram with an alpha angle > 50.5 degrees.

Results: At a mean follow-up of 21.8 months (range 12–30 months), Harris Hip scores improved from 64.66 (range, 42.0–93.0) to 79.97 (range, 47.0–96.0). There were 5 re-operations at a mean time of 15.2 months (range, 4–22). One had a repeat hip scope for intra-articular adhesions, and another for recurrent traumatic tear of the labrum. Three cases with residual hip dysplasia had corrective surgery with a peri-acetabular osteotomy at an average of 16.67 months (range, 15–18 months).

Conclusion: Overall, we have found this to be a reliable, safe and reproducible approach to the treatment of FAI. This is a day care procedure as compared to the classic open procedure. Uncorrected hip dysplasia in the presence of a CAM deformity is a risk factor for early failure.