Abstract
Background
Leg length discrepancy (LLD) after intramedullary nailing of femoral shaft fractures is a common problem reported in up to 43% of cases. Comminuted fractures with radiographic loss of bony landmarks have an increased possibility of being fixed with unequal leg lengths.
Aims
The purpose of this report is to evaluate the efficacy of routinely obtaining a CT scanogram post-operatively on patients of comminuted femoral shaft fractures treated with intramedullary nailing and immediate correction of limb length inequality if indicated.
Results
Twenty one patients with comminuted femoral shaft fractures that were treated with intramedullary nailing and underwent a CT scannogram for evaluation of LLD were included in the study. There were 12 patients with Winquist III and 9 with a Winquist IV fracture pattern. Following surgery leg lengths were measured from the CT scanograms using a computerised measuring ruler. The largest leg length discrepancy noted on scannogram was 4 cm. The average limb length discrepancy was 0.67 cm. Eight patients had a discrepancy of 1cm or greater. We also measured the tibial length in all patients and found only 3 patients with exactly equal tibial lengths. A tibial length discrepancy less than 5mm was observed in 11 patients. In 7 patients it was between 5-9mm and in 3 patients it was 10mm or greater. Four patients underwent leg length correction during the same admission.
Conclusion
The decision to undertake correction of the LLD is primarily dependant on the degree of discrepancy. The degree of LLD that requires correction remains undefined. In this study LLD of greater than 15mm was considered for equalisation. Immediate equalisation saves cost, morbidity, delayed sequelae and litigation. Tibial length discrepancy may contribute to the total leg length discrepancy and requires consideration. We recommend a post-operative scanogram costing $380 in patients of comminuted femoral shaft fractures treated with intramedullary nailing.
