header advert
Results 1 - 7 of 7
Results per page:
The Bone & Joint Journal
Vol. 103-B, Issue 5 | Pages 872 - 880
1 May 2021
Young PS Macarico DT Silverwood RK Farhan-Alanie OM Mohammed A Periasamy K Nicol A Meek RMD

Aims

Uncemented metal acetabular components show good osseointegration, but material stiffness causes stress shielding and retroacetabular bone loss. Cemented monoblock polyethylene components load more physiologically; however, the cement bone interface can suffer fibrous encapsulation and loosening. It was hypothesized that an uncemented titanium-sintered monoblock polyethylene component may offer the optimum combination of osseointegration and anatomical loading.

Methods

A total of 38 patients were prospectively enrolled and received an uncemented monoblock polyethylene acetabular (pressfit) component. This single cohort was then retrospectively compared with previously reported randomized cohorts of cemented monoblock (cemented) and trabecular metal (trabecular) acetabular implants. The primary outcome measure was periprosthetic bone density using dual-energy x-ray absorptiometry over two years. Secondary outcomes included radiological and clinical analysis.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_30 | Pages 5 - 5
1 Aug 2013
Soon V Periasamy K
Full Access

BACKGROUND

Since 1996, the Scottish Hip Fracture Audit (SHFA) group have published reports on the outcomes of patients with hip fractures. In the 2008 report, the group outlined the target standard that “98% of medically fit patients who have sustained a hip fracture should be operated on within 24 hours of ‘safe operating time’ (i.e. between 8 am and 8pm, seven days a week).”1.

AIM

We aim to investigate the compliance of our unit to the SHFA target standard.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_30 | Pages 27 - 27
1 Aug 2013
Hansom J McGraw I Periasamy K Gregori A
Full Access

Whilst the SIGN Guidelines state that the use of prophylactic antibiotics in surgery unequivocally reduces major morbidity, reduces hospital costs and is likely to decrease overall consumption of antibiotics they state the chosen antibiotics must reflect local, disease-specific information about the common pathogens and their antimicrobial susceptibility.

Growing healthcare concern regarding the rates of Clostridium Difficile (C. Diff) within the hospital setting have led to rationalised and better streamlined prescribing practice within the NHS. In NHS Lanarkshire this led to revised guidelines for prophylactic antibiotic use in Orthopaedics in 2010. Routine use of 3rd generation Cephalosporin has been replaced by Flucloxacillin 1g and Gentamicin 1mg/kg.

Anecdotally the surgeons within our department were concerned that they were recognising more post-operative renal impairment than before 2010.

Our study took 902 consecutive cases treated surgically with either Total Hip Replacement, Total Knee Replacement, Dynamic Hip Screw for fracture and Hemiarthroplasty for fracture since the introduction of the new antibiotic policy. We compared this with a similar number of cases treated with the same operations pre-2010. We looked at the pre admission Urea & Electrolystes compared with immediate post-operative results and applied the definition of Acute Kidney Injury (AKI) as defined by the Acute Kidney Injury Network. A. A rapid time course (less than 48 hours) and B. Reduction of kidney function either as an absolute increase in serum creatinine of ≥26.4μmol/l (≥0.3 mg/dl) or a percentage increase in serum creatinine of ≥50%. Based on this definition we found an increased rate of AKI of 13.7% after the introduction of the use of Gentamicin from 9.8% before its routine use.

We wish to highlight that the routine widespread use of Gentamicin may be increasing the rate of acute renal dysfunction seen in Orthopaedic patients undergoing major surgery.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_30 | Pages 1 - 1
1 Aug 2013
Halai M Jayaram P Drury C Gregori A Murray D Oroko P Periasamy K
Full Access

Aluminia ceramic on ceramic (COC) bearing surfaces have been used for 35 years in total hip arthroplasty (THA). Studies report 85% survival at a minimum follow-up of 18.5 years. Nonetheless, an audible noise is a finding associated with COC bearings with incidence rates of 2–10%. This study aims to determine the prevalence of noise and evaluate its effect on patients.

All patients who had a COC THA from August 2003 to December 2010 were contacted and asked to complete a standardised questionnaire. This asked about the presence and characteristics of a noise and if associated with activities, pain and whether this phenomenon should be mentioned preoperatively.

Four consultant surgeons performed 282 consecutive primary COC THAs in 258 patients. (Male=122, Female=136 mean age 68.5; age range 28–88). In all cases, the same brand of ceramic acetabular component and stems were implanted. 11.0% had a noise, of which 5.5% had a squeak. Pain was experienced in 38.7% of patients in hips that made a noise. There was no trauma and one dislocation in this group. In this study, 85% of noises occur during weight-bearing although no patients have reduced daily activities as a result of the noises. Of all the patients, 55.0% stated they would have preferred to have known about a noisy hip possibility before consenting but none would have refused consent.

Squeaking has not been a problem here despite the prevalence being higher than most in the literature. The authors recommend that squeaking should be discussed preoperatively. A checklist for Orthopaedic Trainees is being drafted to enable trainees to counsel patients appropriately, allowing patients a better opportunity to give informed consent.


The Journal of Bone & Joint Surgery British Volume
Vol. 93-B, Issue 8 | Pages 1033 - 1044
1 Aug 2011
Periasamy K Watson WS Mohammed A Murray H Walker B Patil S Meek RMD

The ideal acetabular component is characterised by reliable, long-term fixation with physiological loading of bone and a low rate of wear. Trabecular metal is a porous construct of tantalum which promotes bony ingrowth, has a modulus of elasticity similar to that of cancellous bone, and should be an excellent material for fixation.

Between 2004 and 2006, 55 patients were randomised to receive either a cemented polyethylene or a monobloc trabecular metal acetabular component with a polyethylene articular surface. We measured the peri-prosthetic bone density around the acetabular components for up to two years using dual-energy x-ray absorptiometry.

We found evidence that the cemented acetabular component loaded the acetabular bone centromedially whereas the trabecular metal monobloc loaded the lateral rim and behaved like a hemispherical rigid metal component with regard to loading of the acetabular bone. We suspect that this was due to the peripheral titanium rim used for the mechanism of insertion.


Orthopaedic Proceedings
Vol. 92-B, Issue SUPP_III | Pages 395 - 395
1 Jul 2010
Periasamy K Spencer S Patil S Mohammed A Murray H Watson W Meek R
Full Access

Introduction: The ideal acetabular component has low wear, permanent fixation and physiological bone loading. Recently trabecular metal has been promoted as reproducing the modulus of trabecular bone with a cementless fixation. The aim of this trial was to see if a monobloc trabecular backed polyethylene acetabular component loaded the pelvis physiologically as a cemented polyethylene component.

Method: Between 2004 and 2006 54 patients were ran-domised to a cemented polyethylene acetabular component versus a monobloc trabecular backed polyethylene acetabular component. The primary outcome measurement was bone density in peri-prosthetic acetabular regions of interest measured preoperatively and post operatively at 6 weeks and 1 year. Secondary outcomes measured were radiographic and functional outcomes (HHS and Oxford score).

Results: Radiographically 8 patients in the trabecular group had a significant gap in zone II which resolved in 6 by 1 year. The cemented group had 3 patients with a radiolucent line (zone 1) at 1 year. HHS and OXFORD scores improved with no significant difference between the groups. Both groups had significant loss of bone density in the ilium and ischium. The trabecular group produced a significant increase in bone density in the superolateral region. The cemented group produced increased bone density in the superomedial region.

Discussions and Conclusions: There is a significant reduction in BMD for both groups in the upper pelvis and ischium in keeping with finite element modelling predictions. The press-fit group relative to the cemented group resulted in decreased BMD in the superomedial peri-prosthetic region. The trabecular monobloc cup therefore behaves more like a rigid cementless shell despite the properties of trabecular metal.


Orthopaedic Proceedings
Vol. 91-B, Issue SUPP_III | Pages 401 - 401
1 Sep 2009
Mathew MO Frame M Periasamy K Picard F Leitner F Mollard B
Full Access

Aim: To evaluate the accuracy of intra-operative point acquisition during navigated hip replacement using an ultrasound transducer probe relative to a percutaneous digitiser stylus (pointer)

To study intra- and inter-observer variability with the use of the ultra-sound transducer and percutaneous digitiser point probes

To assess the learning curve with the use of the ultrasound transducer probe

As part of a larger cadaver study evaluating navigated total hip replacement via the posterior approach, we assessed data relating to acquisition of bony landmarks of the Anterior Pelvic Plane (APP) by four surgeons with an ultrasound transducer and a percutaneous point probe. The surgeons had differing levels of experience with hip surgery in general, and also with surgical navigation per se, but none of them had previously used the ultrasound probe for the specific purpose of landmark acquisition.

Without fixing an absolute positional value for any of the bony landmarks, the points registered for individual landmarks by each surgeon were then studied, looking at the three-dimensional spread of these points relative to each other about the mean value. The data from all four surgeons were analysed, looking at the global dispersion of points acquired by the ultrasound and percutaneous point digitiser probes.

Our results show that with the exception of a few isolated outliers, the ultrasound probe generated values fell within a +/− 10 mm range. For all four surgeons, the global spread of ultrasound-registered points was noted to be less than that acquired by percutaneous point probe acquisition. Of interest was the finding that points registered by individual surgeons using the ultrasound probe tended to be grouped distinctly together but spatially separate from those of the other surgeons; it would appear that each operator was “homing” in on what he perceived to be the bony landmark in question on the projected ultrasound image.

With the percutaneous pointer probe, and with the anterior superior iliac spines as the target, there was closer grouping of points around the mean positional value for the two surgeons who were experienced with its use. However, at the symphysis pubis, the spread of points for these surgeons were not much different from the other two less experienced one, with these points showing a global spread as great as 25 mm.

Regardless of the experience of the surgeon, the use of the ultrasound transducer probe appears to be more accurate than percutaneous pointer probe for acquisition of the bony landmarks that constitute the anterior pelvic plane. The learning curve associated with its use is seemingly short and steep. Its accuracy is limited by the fact that the identification of the bony land marks on the on-screen display is open to interpretation by the individual. Methods to standardise the identification of these landmarks on ultrasound images may help improve its accuracy in the future.