The aim of this study was to investigate the distribution of phenotypes in Asian patients with end-stage osteoarthritis (OA) and assess whether the phenotype affected the clinical outcome and survival of mechanically aligned total knee arthroplasty (TKA). We also compared the survival of the group in which the phenotype unintentionally remained unchanged with those in which it was corrected to neutral. The study involved 945 TKAs, which were performed in 641 patients with primary OA, between January 2000 and January 2009. These were classified into 12 phenotypes based on the combined assessment of four categories of the arithmetic hip-knee-ankle angle and three categories of actual joint line obliquity. The rates of survival were analyzed using Kaplan-Meier methods and the log-rank test. The Hospital for Special Surgery score and survival of each phenotype were compared with those of the reference phenotype with neutral alignment and a parallel joint line. We also compared long-term survival between the unchanged phenotype group and the corrected to neutral alignment-parallel joint line group in patients with Type IV-b (mild to moderate varus alignment-parallel joint line) phenotype.Aims
Methods
The aim of this study was to describe the current pathways of care for patients with a fracture of the hip in five low- and middle-income countries (LMIC) in South Asia (Nepal and Sri Lanka) and Southeast Asia (Malaysia, Thailand, and the Philippines). The World Health Organization Service Availability and Readiness Assessment tool was used to collect data on the care of hip fractures in Malaysia, Thailand, the Philippines, Sri Lanka, and Nepal. Respondents were asked to provide details about the current pathway of care for patients with hip fracture, including pre-hospital transport, time to admission, time to surgery, and time to weightbearing, along with healthcare professionals involved at different stages of care, information on discharge, and patient follow-up.Aims
Methods
Focal knee arthroplasty is an attractive alternative to knee arthroplasty for young patients because it allows preservation of a large amount of bone for potential revisions. However, the mechanical behaviour of cartilage has not yet been investigated because it is challenging to evaluate in vivo contact areas, pressure, and deformations from metal implants. Therefore, this study aimed to determine the contact pressure in the tibiofemoral joint with a focal knee arthroplasty using a finite element model. The mechanical behaviour of the cartilage surrounding a metal implant was evaluated using finite element analysis. We modelled focal knee arthroplasty with placement flush, 0.5 mm deep, or protruding 0.5 mm with regard to the level of the surrounding cartilage. We compared contact stress and pressure for bone, implant, and cartilage under static loading conditions.Aims
Methods
The aim of this study was to investigate the outcomes of arthroscopic decompression of calcific tendinitis performed without repairing the rotator cuff defect. A total of 99 patients who underwent treatment between December 2013 and August 2019 were retrospectively reviewed. Visual analogue scale (VAS) and American Shoulder and Elbow Surgeons (ASES) scores were reviewed pre- and postoperatively according to the location, size, physical characteristics, and radiological features of the calcific deposits. Additionally, the influence of any residual calcific deposits shown on postoperative radiographs was explored. The healing rate of the unrepaired cuff defect was determined by reviewing the 29 patients who had follow-up MRIs.Aims
Methods
The primary objective is to compare revision rates for lumbar disc replacement (LDR) and fusion at the same or adjacent levels in Ontario, Canada. The secondary objectives include acute complications during hospitalization and in 30 days, and length of hospital stay. A population-based cohort study was conducted using health administrative databases including patients undergoing LDR or single level fusion between October 2005 to March 2018. Patients receiving LDR or fusion were identified using physician claims recorded in the Ontario Health Insurance Program database. Additional details of surgical procedure were obtained from the Canadian Institute for Health Information hospital discharge abstract. Primary outcome measured was presence of revision surgery in the lumbar spine defined as operation greater than 30 days from index procedure. Secondary outcomes were immediate/ acute complications within the first 30 days of index operation. A total of 42,024 patients were included. Mean follow up in the LDR and fusion groups were 2943 and 2301 days, respectively. The rates of revision surgery at the same or adjacent levels were 4.7% in the LDR group and 11.1% in the fusion group (P=.003). Multivariate analysis identified risk factors for revision surgery as being female, hypertension, and lower surgeon volume. More patients in the fusion group had dural tears (p<.001), while the LDR group had more “other” complications (p=.037). The LDR group had a longer mean hospital stay (p=.018). In this study population, the LDR group had lower rates of revision compared to the fusion group. Caution is needed in concluding its significance due to lack of clinical variables and possible differences in indications between LDR and posterior decompression and fusion.
A functional anterior cruciate ligament (ACL) or posterior cruciate ligament (PCL) has been assumed to be required for patients undergoing unicompartmental knee arthroplasty (UKA). However, this assumption has not been thoroughly tested. Therefore, this study aimed to assess the biomechanical effects exerted by cruciate ligament-deficient knees with medial UKAs regarding different posterior tibial slopes. ACL- or PCL-deficient models with posterior tibial slopes of 1°, 3°, 5°, 7°, and 9° were developed and compared to intact models. The kinematics and contact stresses on the tibiofemoral joint were evaluated under gait cycle loading conditions.Aims
Methods
Paediatric bone sarcomas around the knee are often amenable to either endoprosthetic reconstruction or rotationplasty. Cosmesis and durability dramatically distinguish these two options, although patient-reported functional satisfaction has been similar among survivors. However, the impact on oncological and surgical outcomes for these approaches has not been directly compared. We retrospectively reviewed all wide resections for bone sarcoma of the distal femur or proximal tibia that were reconstructed either with an endoprosthesis or by rotationplasty at our institution between June 2004 and December 2014 with a minimum two year follow-up. Pertinent demographic information, surgical and oncological outcomes were reviewed. Survival analysis was performed using the Kaplan-Meier method with statistical significance set at p<0.05. Thirty eight patients with primary sarcomas around the knee underwent wide resection and either endoprosthetic reconstruction (n=19) or rotationplasty (n=19). Groups were comparable in terms of demographic parameters and systemic tumour burden at presentation. We found that selection of endoprosthetic reconstruction versus rotationplasty did not impact overall survival for the entire patient cohort but was significant in subgroup analysis. Two-year overall survival was 86.7% and 85.6% in the endoprosthesis and rotationplasty groups, respectively (p=0.33). When only patients with greater than 90% chemotherapy-induced necrosis were considered, overall survival was significantly better in the rotationplasty versus endoprosthesis groups (100% vs. 72.9% at two years, p=0.013). Similarly, while event-free survival was not affected by reconstruction method (60.2% vs. 73.3% at two years for endoprosthesis vs rotationplasty, p=0.27), there was a trend towards lower local recurrence in rotationplasty patients (p=0.07). When surgical outcomes were considered, a higher complication rate was seen in patients that received an endoprosthesis compared to those who underwent rotationplasty. Including all reasons for re-operation, 78.9% (n=15) of the endoprosthesis patients required a minimum of one additional surgery compared with only 26.3% (n=5) among rotationplasty patients (p=0.003). The most common reasons for re-operation in endoprosthesis patients were wound breakdown/infection (n=6), limb length discrepancy (n=6) and periprosthetic fracture (n=2). Excluding limb length equalisation procedures, the average time to re-operation in this patient population was 5.6 months (range 1 week to 23 months). Similarly, the most common reason for a secondary procedure in rotationplasty patients was wound breakdown/infection, although only two patients experienced this complication. Average time to re-operation in this group was 23.8 months (range 5 to 49 months). Endoprosthetic reconstruction and rotationplasty are both viable limb-salvage options following wide resection of high-grade bony sarcomas located around the knee in the paediatric population. Endoprosthetic reconstruction is associated with a higher complication rate and may negatively impact local recurrence. Study of a larger number of patients is needed to determine whether the reconstructive choice affects survival.
Unicompartmental knee arthroplasty (UKA) has become a popular method of treating knee localized osteoarthritis (OA). Additionally, the posterior cruciate ligament (PCL) is essential to maintaining the physiological kinematics and functions of the knee joint. Considering these factors, the purpose of this study was to investigate the biomechanical effects on PCL-deficient knees in medial UKA. Computational simulations of five subject-specific models were performed for intact and PCL-deficient UKA with tibial slopes. Anteroposterior (AP) kinematics and contact stresses of the patellofemoral (PF) joint and the articular cartilage were evaluated under the deep-knee-bend condition.Aims
Methods
Mobile-bearing unicompartmental knee arthroplasty (UKA) with a flat tibial plateau has not performed well in the lateral compartment, leading to a high rate of dislocation. For this reason, the Domed Lateral UKA with a biconcave bearing was developed. However, medial and lateral tibial plateaus have asymmetric anatomical geometries, with a slightly dished medial and a convex lateral plateau. Therefore, the aim of this study was to evaluate the extent at which the normal knee kinematics were restored with different tibial insert designs using computational simulation. We developed three different tibial inserts having flat, conforming, and anatomy-mimetic superior surfaces, whereas the inferior surface in all was designed to be concave to prevent dislocation. Kinematics from four male subjects and one female subject were compared under deep knee bend activity.Aims
Methods
Anterior cruciate ligament (ACL) injuries are frequent among athletes and a leading cause of time away from competition. Stability of the knee involves the ACL for limiting anterior tibial translation and the ALL (anterolateral ligament) to restrain internal rotation of the tibia. Present indications for treatment with a combined ACL-ALL reconstruction remain unclear and mostly subjective. We mathematically modeled the tibial plateau geometry to try and identify patients at risk of ACL injury, and develop an objective trigger point for the decision to proceed with additional surgery to optimize rotational stability in these higher risk patients. We hypothesized that an increased convexity and steepness of the posterior aspect of the lateral plateau would subject knees to higher rotational torques leading to potentially a higher risk of ACL injury. The study design was a case-control study involving ACL reconstruction cases (n=68) and matched controls (n=68) between 2008–2015 at our institution. We used a two-dimensional approach, evaluating sagittal MRI images of the knee to model the posterior convexity of the lateral tibial plateau. Points were selected along the articular surface, and a least-squares regression was used to curve-fit a power function (y = a xn). In the equation, larger coefficient a and n represented steeper slopes. The cases and controls were compared using a Mann-Whitney-U test, and the statistical significance was set at α < 0.05. A subgroup analysis for females and males was also performed for the curve-fit coefficients. We observed a significant difference in the tibial surface geometry between our ACL reconstruction cases and matched controls (Figure 1). The modeled power equation for our ACL cases had larger coefficients compared to controls for all groups. For all pooled subjects, coefficient a (ACL recon cases = 0.90 vs controls = 0.68, p < 0.0001) and coefficient n (ACL recon cases = 0.34 vs controls = 0.30, p = 0.07) (Table 1). For the statistically significant coefficient a, we found it had a sensitivity of 78.9% and specificity of 77.5% for the statistically significant coefficient a, we found it had a sensitivity of 78.9% and specificity of 77.5% for predicting injury, using a cut off coefficient of a = 0.78. The odds ratio was 12.6 [5.5 – 29]. The posterolateral cartilaginous slope of the tibial plateau was mathematically modeled in patients with ACL injury. Patients with ACL injury demonstrated abnormally steep and fast slopes compared to controls that may play predispose to ACL injury by increasing anterior translation forces and internal rotation torques sustained by their knee joint. A steeper slope may also explain high-grade pivot shifts on physical exam that are thought to be a relative indication for adding an associated ALL reconstruction. Our findings are promising for adding more objectivity to surgical decision-making, especially with identifying high-risk patients that may be candidates for combined ACL-ALL reconstructions. For any figures or tables, please contact the authors directly.
Technology within medicine has great potential to bring about more accessible, efficient, and a higher quality delivery of care. Paediatric supracondylar fractures are the most common elbow fracture in children and at our institution often have high rates of unnecessary long term clinical follow-up, leading to an inefficient use of healthcare and patient resources. This study aims to evaluate patient and clinical factors that significantly predict necessity for further clinical visits following closed reduction and percutaneous pinning. A total of 246 children who underwent closed reduction and percutaneous pinning following supracondylar humerus fractures were prospectively enrolled over a two year period. Patient demographics, perioperative course, goniometric measurements, functional outcome measures, clinical assessment and decision making for further follow up were assessed. Categorical and continuous variables were analyzed and screened for significance via bivariate regression. Significant covariates were used to develop a predictive model through multivariate logistical regression. A probability cut-off was determined on the Receiver Operator Characteristic (ROC) curve using the Youden index to maximize sensitivity and specificity. The regression model performance was then prospectively tested against 22 patients in a blind comparison to evaluate accuracy. 246 paediatrics patients were collected, with 29 cases requiring further follow up past the three month visit. Significant predictive factors for follow up were residual nerve palsy (p < 0 .001) and maximum active flexion angle of injured elbow (p < 0 .001). Insignificant factors included other goniometric measures, subjective evaluations, and functional outcomes scores. The probability of requiring further clinical follow up at the 3 month post-op point can be estimated with the equation: logit(follow-up) = 11.319 + 5.518(nerve palsy) − 0.108(maximum active flexion). Goodness of fit of the model was verified with Nagelkerke R2 = 0.574 and Hosmer & Lemeshow chi-square (p = 0.739). Area Under Curve of the ROC curve was C = 0.919 (SE = 0.035, 95% CI 0.850 – 0.988). Using Youden's Index, a cut-off for probability of follow up was set at 0.094 with the overall sensitivity and specificity maximized to 86.2% and 88% respectively. Using this model and cohort, 194 three month clinic visits would have been deemed medically unnecessary. Preliminary blind prospective testing against the 22 patient cohort demonstrates a model sensitivity and specificity at 100% and 75% respectively, correctly deeming 15 visits unnecessary. Virtual clinics and automated clinical decision making can improve healthcare inefficiencies, unclog clinic wait times, and ultimately enhance quality of care delivery. Our regression model is highly accurate in determining medical necessity for physician examination at the three month visit following supracondylar fracture closed reduction and percutaneous pinning. When applied correctly, there is potential for significant reductions in health care expenditures and in the economic burden on patient families by removing unnecessary visits. In light of positive patient and family receptiveness toward technology, our promising findings and predictive model may pave the way for remote health care delivery, virtual clinics, and automated clinical decision making.
Paediatric supracondylar fractures are the most common elbow fracture in children, and is associated with an 11% incidence of neurologic injury. The goal of this study is to investigate the natural history and outcome of motor nerve recovery following closed reduction and percutaneous pinning of this injury. A total of 246 children who underwent closed reduction and percutaneous pinning following supracondylar humerus fractures were prospectively enrolled over a two year period. Patient demographics (age, weight), Gartland fracture classification, and associated traumatic neurologic injury were collected and analyzed with descriptive statistics. Patients with neurologic palsies were separated based on nerve injury distribution, and followed long term to monitor for neurologic recovery at set time points for follow up. Of the 246 patient cohort, 46 patients (18.6%) sustained a motor nerve palsy (Group 1) and 200 patients (82.4%) did not (Group 2) following elbow injury. Forty three cases involved one nerve palsy, and three cases involved two nerve palsies. No differences were found between patient age (Group 1 – 6.6 years old, Group 2 – 6.2 years old, p = 0.11) or weight (Group 1 – 24.3kg, Group 2 – 24.5kg, p = 0.44). A significantly higher proportion of Gartland type III and IV injuries were found in those with nerve palsies (Group 1 – 93.5%, Group 2 – 59%, p < 0 .001). Thirty four Anterior Interosseous Nerve (AIN) palsies were observed, of which 22 (64.7%) made a full recovery by three month. Refractory AIN injuries requiring longer than three month recovered on average 6.8 months post injury. Ten Posterior Interosseous Nerve (PIN) palsies occurred, of which four (40%) made full recovery at three month. Refractory PIN injuries requiring longer than three month recovered on average 8.4 months post injury. Six ulnar nerve motor palsies occurred, of which zero (0%) made full recovery at three month. Ulnar nerve injuries recovered on average 5.8 months post injury. Neurologic injury occurs significantly higher in Gartland type III and IV paediatric supracondylar fractures. AIN palsies remain the most common, with an expected 65% chance of full recovery by three month. 40% of all PIN palsies are expected to fully recover by three month. Ulnar motor nerve palsies were slowest to recover at 0% by the three month mark, and had an average recovery time of approximately 5.8 months. Our study findings provide further evidence for setting clinical and parental expectations following neurologic injury in paediatric supracondylar elbow fractures.
Commonly performed unicompartmental knee arthroplasty (UKA) is not designed for the lateral compartment. Additionally, the anatomical medial and lateral tibial plateaus have asymmetrical geometries, with a slightly dished medial plateau and a convex lateral plateau. Therefore, this study aims to investigate the native knee kinematics with respect to the tibial insert design corresponding to the lateral femoral component. Subject-specific finite element models were developed with tibiofemoral (TF) and patellofemoral joints for one female and four male subjects. Three different TF conformity designs were applied. Flat, convex, and conforming tibial insert designs were applied to the identical femoral component. A deep knee bend was considered as the loading condition, and the kinematic preservation in the native knee was investigated.Aims
Methods
Unicompartmental knee arthroplasty (UKA) is an alternative to total knee arthroplasty with isolated medial or lateral compartment osteoarthritis. However, polyethylene wear can significantly reduce the lifespan of UKA. Different bearing designs and materials for UKA have been developed to change the rate of polyethylene wear. Therefore, the objective of this study is to investigate the effect of insert conformity and material on the predicted wear in mobile-bearing UKA using a previously developed computational wear method. Two different designs were tested with the same femoral component under identical kinematic input: anatomy mimetic design (AMD) and conforming design inserts with different conformity levels. The insert materials were standard or crosslinked ultra-high-molecular-weight polyethylene (UHMWPE). We evaluated the contact pressure, contact area, wear rate, wear depth, and volumetric wear under gait cycle loading conditions.Objectives
Methods
NICE guidance suggests that caudal epidural injections of steroid and local anaesthetic may be considered for acute and severe sciatica, however studies have demonstrated limited long-term benefit and impact on future surgery. This study aimed to investigate the use of caudal epidural injections in a district general hospital setting and the rate of subsequent operation. All patients undergoing caudal epidural injection between 1st January and 30th June 2015 were included. Records were reviewed to obtain diagnosis, pre- and post-epidural clinical findings, prior interventions, and subsequent operations.Background
Methods
Suture anchor have been used in surgical procedure of tendon or ligament repair. Recently, there has been developed an all suture anchor (soft anchor) which can be used even when the insertion area is narrow. But, the stability of soft anchors due to narrow zone has not been elucidated. This purpose of this study was to investigate stability of soft anchors with respect to their fixation intervals. Polyurethane foams with two different bone densities (10 pcf; 0.16g / cm³, 20 pcf; 0.32g / cm³) were used. All suture anchors and conventional suture anchors were fixed at 10mm, 5mm, and 2.5mm intervals. The failure load was measured using a mechanical testing machine. The average load to failure of conventional suture anchor
We evaluated (1) wear rate, (2) prevalence and volume of osteolysis using 3D-CT scan, (3) other bearing-related complications, (4) HHS and survivorship free from revision at 15 years after THA using first-generation XLPE (1G XLPE). One-hundred sixty THAs were evaluated regarding bearing-related complication, HHS and survivorship. Among them, 112 hips underwent 3D-CT to analyze wear rate and osteolysis. All THAs were performed by single surgeon using cup of identical design, a 28-mm metal head and 1G XLPE (10 Mrad). Average age were 57 years and mean follow-up was 15.2 years. 3D-CT scan was performed at average of 13.0 years. Clinical evaluation included HHS and radiographic analysis was performed regarding stem alignment, cup anteversion and inclination angle, component stability, wear rate and osteolysis. Wear was measured using digital software. The prevalence and volume of osteolysis were also evaluated. Complications included XLPE dissociation/rim fracture, dislocation, periprosthetic fracture, infection, HO and any revision. Survivorship free from revision at 15 years was estimated. Average inclination and anteversion angle of cups were 40.7° and 20.6°. Mean stem alignment was 0.1° valgus. Average bedding-in and annual wear rate wear rate was 0.085 mm and 0.025 mm/yr. Eleven hips (10%) demonstrated osteolysis; pelvic osteolysis with average volume of 1.4 cm3 in six and femoral osteolysis with mean size of 0.4 cm2 in seven hips. Of 160 THAs, 5 hips (3%) dislocated. Overall, bearing-related complications occurred in 16 hips (10%). Other complications included postoperative periprosthetic fracture in 4 (3%), infection and HO in 3 hips, respectively. No hip demonstrated loosening, XLPE rim fracture/dissociation. Seven THAs (4%) were revised; recurrent dislocation in 5 and periprosthetic joint infection in 2 hips. Average HHS at last follow-up improved from 47.7 preoperatively to 91.2 points (p<0.001). Estimated survivorship free from revision at 15 years was 95.6 %. THA using 1G XLPE demonstrated low wear rate as well as low incidence of osteolysis at average follow-up of fifteen years. Longer-term studies will be necessary to determine if XLPE will continue to demonstrate this improved osteolysis characteristics.
The purpose of this study is to report the results of the first 1000 cases hip arthroplasty using the Bencox® hip stem, the first hip prosthesis developed and manufactured in Korea. This study reviewed 1000 cases retrospectively who underwent arthroplasty using Bencox® hip system. The Bencox® hip stem is the first hip prosthesis developed and manufactured in Korea. This stem have a double-tapered, wedge shape figure with a rectangular-shaped cross-section and specially designed neck shape, which is design to achieve normal stress pattern of the proximal femur and to increase initial stability and to increase range of motion. Surface is treated with MAO (Micro Arc Oxidation) coating. From the first arthroplasty with this system in September 2006, sequentially 1000 arthroplasties were performed by single surgeon until the July 2014. This material included 439 men and 561 female. Average age of patients was 65 year old. Follow up period was average 72.1 month (minimum 34 months to maximum 120 months). 1000 cases consisted of 569 hips in patients with femoral neck or intertrochanteric fracture or subtrochanteric fracture (fracture group), 155 hips in osteoarthritis, 192 hips in patients with osteonecrosis of the femoral head (arthritis group), 84 hips in revision surgery (revision group). Revision cases consisted of 58 hips with aseptic loosening and 26 hips with loosening due to infection sequelae. They were underwent hip arthroplasty using a Bencox® hip stem in combination with Bencox® bipolar cup and Bencox®acetabular cup. Patients in the fracture group usually underwent bipolar hip arthroplasty, and those in the arthritis group and revision group underwent total hip arthroplasty. They were reviewed by medical records, clinically and radiologicallyPurpose
Material & Method
Cobalt chrome femoral head has been used widely in total hip arthroplasty and has shown favorable outcome. However, there is still of concern of potential metal toxicity from the wear debris. In the other hand, titanium is well known for its biocompatibility but it is not used in bearing surface of arthroplasty due to its brittleness. Recently, coating of the prosthesis using plasma electrolytic oxidation (PEO) has shown favorable surface protection. Thus, in this study, we tried to find out whether the PEO coating on the titanium surface would provide surface protection. Five Titanium alloy (Ti-6Al-4V) ball mimicking femoral head was manufactured and was coted using plasma electrolytic oxidation. Wear rate was tested using validated wear tester with 10N compression force at 80rpm. The amount of wear was detected by measuring change of weight after wear test was completed. This was compared with femoral head manufactured with titanium alloy without PEO coating. Toxicity of the debris was also tested using MTT assay with human osteoblast cell line.Introduction
Materials and methods
Posterior condylar offset (PCO) and posterior tibial slope (PTS) are critical factors in total knee arthroplasty (TKA). A computational simulation was performed to evaluate the biomechanical effect of PCO and PTS on cruciate retaining TKA. We generated a subject-specific computational model followed by the development of ± 1 mm, ± 2 mm and ± 3 mm PCO models in the posterior direction, and -3°, 0°, 3° and 6° PTS models with each of the PCO models. Using a validated finite element (FE) model, we investigated the influence of the changes in PCO and PTS on the contact stress in the patellar button and the forces on the posterior cruciate ligament (PCL), patellar tendon and quadriceps muscles under the deep knee-bend loading conditions.Objectives
Methods
Osteoarthritis (OA) is the most common form of arthritis, affecting approximately 15% of the human population. Recently, increased concentration of nitric oxide in serum and synovial fluid in patients with OA has been observed. However, the exact role of nitric oxide in the initiation of OA has not been elucidated. The aim of the present study was to investigate the role of nitric oxide in innate immune regulation during OA initiation in rats. Rat OA was induced by performing meniscectomy surgery while cartilage samples were collected 0, 7, and 14 days after surgery. Cartilage cytokine levels were determined by using enzyme-linked immunosorbent assay, while other proteins were assessed by using Western blotObjectives
Methods
Total knee arthroplasty (TKA) using an imageless navigation is widely used in these days. Despite the usefulness of navigation-assisted TKA, there are still limitations of accuracy. From previous studies, many factors have been suggested as causes of the discordance between pre-op planning and post-op results. In Addition, Registration of reliable landmark is very important factor in navigation-assisted TKA, fundamentally. Nevertheless, current method of registration process is substantially affected by subjective preference of operators. Until now, However, there is no consensus about the optimal range of reference point. Moreover, the tolerance of imageless navigation system is still questionable. We investigated the effect of variation during the manual registration in this study. We compared the measured alignment and calculated plan of navigation system which were collected from repeated independent registration processes. From 7 March 2016 to 13 May 2016, 44 patients (49 knees) underwent navigation assisted TKA with Orthopilot® Aesculap system. The subject group were severe osteoarthritis patients, they have evaluated radiographically and clinically before the operation. we excluded candidates who have shown very severe mal-alignment (>20 °) and metaphyseal bowing in Pre-op radiographic evaluation. All patients were followed for postoperative long axis film that could measure the correction angle, and followed clinically for functional score. Authors executed multiple registration trials in a single case, each trial was implemented by different surgeons (Senior surgeon JHJ and trainee LJH1, LJH2). At first, Senior surgeon (JHJ) start the operation from initial approach. Standard sub-vastus approach was applied to all-patients. After the procedure of joint exposure, each participating surgeon did the examination of knee anatomy and registered optimal point of his own. It was repeated three times (J,L1,L2) via imageless navigation system. Then, we collected the information of measured limb alignments and calculated plans of tibia cutting from navigation system.BACKGROUNDS
METHODS
The range of motion (ROM) obtained after total knee arthroplasty (TKA) is an important measurement to evaluate the postoperative outcomes impacting other measures such as postoperative function and satisfaction. Flexion contracture is a recognized complication of TKA, which reduces ROM or stability and is a source of morbidity for patients. The purpose of this study was to evaluate the influence of intra-operative soft tissue release on correction of flexion contracture in navigated TKA.Introduction
Objectives
A matched comparison was made between femoral neck-preserving short, tapered stems (n = 50) and conventional length femoral stems (n = 50) in cementless total hip arthroplasty between January 2008 and January 2012. Patients were matched for age, sex, body mass index, height, surgical approach, and surgeon. In group A, mean preoperative HHS and WOMAC scores of 55.0 and 53.0, respectively, improved to mean postoperative scores of 98.6 and 3.3, respectively, at an average follow–up of 37.2 months. In group B, mean preoperative HHS and WOMAC scores of 53.0 and 49.5, respectively, improved to mean postoperative scores 97.8 and 4.4, respectively, at an average follow–up of 35.3 months. In addition, no significant differences in mean postoperative HHS (
We prospectively analyzed 83 patients who underwent ceramic-on-ceramic THA using preassembled (n = 22) or modular acetabular components (n = 61) between June 2010 and June 2012. No radiographic evidence of progressive radiolucency, osteolytic lesions, acetabular fractures, or component migration was detected in either group. Furthermore, no patient required revision surgery for instability or ceramic breakage. Table 1 shows the mean postoperative HHS, WOMAC score, and acetabular component inclination and anteversion in groups A and B. No significant differences in mean postoperative HHS (P < 0.056), WOMAC score (P < 0.258), acetabular component inclination (P < 0.827), or anteversion (P < 0.549) were observed between the two groups according to the independent sample t-test. However, the chi-square (Fisher's exact) test showed a significant difference between the two groups with respect to the gender of the patients (P < 0.001, Table 2). These findings indicate that half of the women had smaller acetabular diameters accommodating a cup size of only 48–50-mm. Thus a preassembled ceramic liner is a very good option for women with a small acetabulum, which could permit the use of a larger femoral head (36-mm) with thin-walled acetabular components. In contrast, the component-specific complications between the two groups were quite similar. One patient (group B) had transient squeaking that disappeared after a few months. One patient (group B) had a mild limp caused by abductor muscle weakness, and one patient (group B) had a superficial wound infection that was treated with local debridement and antibiotics. Early dislocation (P < 0.488) occurred in three patients (one in group A and two in group B). Two patients (one in group A and one in group B) reported postoperative falling events at their bedside. The other in group B was a female with rheumatoid arthritis, which can lead to a much higher risk of dislocation due to soft tissue laxity around the hip joint. All of these patients were treated by closed reduction without further incident. Three patients (one in group A and two in group B) had mild iliopsoas pain (P < 0.488) that was not associated with loosening; however, the pain did not limit their activities (Table 3). In conclusion, we found no significant differences in the mean postoperative radiographic or functional outcomes or complications between the two groups, showing satisfactory performance at the 2 year follow up. Only the gender of the patient was significantly different between the two goups, demonstrating that a larger number of women had smaller acetabular diameters accommodating a cup size of only 48–50-mm. Although a preassembled cup with a 36-mm ceramic liner has proven safety in the short term, future research should focus on its long-term risks.
Thermal injury to the radial nerve caused by cement leakage is a rare complication after revision elbow arthroplasty. Several reports have described nerve palsy caused by cement leakage after hip arthroplasty. However, little information is available regarding whether radial nerve injury due to cement leakage after humeral stem revision will recover. In a recent study, radial nerve palsy occurred in 2 of 7 patients who had thermal injury from leaked cement during humeral component revisions. These patients did not regain function of the radial nerve after observation. We present a case of functional recovery from a radial nerve palsy caused by cement leakage after immediate nerve decompression in revision elbow arthroplasty[Fig. 1.2].
The purpose of this study was to evaluate and compare the clinical, radiological outcomes of the group of patients with distal femoral cortical hypertrophy (DFCH) and without DFCH after hip arthroplasty using a cementless double tapered femoral stem and to analyze a correlation between patients factors and DFCH. Four hundreds four patients (437 hips) who underwent total hip arthroplasty (n = 293) or hemiarthroplasty (n = 144) using a Accolade TMZF femoral stem between Jun 2006 and March 2012 and were follow up period more than 24 months after surgery were enrolled in this study. They were divided into 2 groups, the one group (n = 27) included patients with DFCH, and the other group (n = 410) included patients without DFCH. The mean follow up period was 54.5 months (range, 24 to 85 months) and 56.2 months (range, 24 to 92 months) for patients with DFCH and without DFCH.Purpose
Materials and Methods
Total knee arthroplasty (TKA) is a very successful procedure with good clinical outcomes. However, the effects of obesity on TKA outcomes remain controversial and inconclusive. The objective of this study was to quantify the biomechanical effects of simulated obesity on Cruciate Retaining (CR) and Posterior Stabilized (PS) TKA in human cadaveric knees. We hypothesized that biomechanical characteristics of CR TKA will be less dependent on simulated obesity compared to PS TKA. Eight cadaveric knees (4 male, 4 female) average age 68.4 years (range, 40–86 years) underwent TKA and were tested using a custom knee testing system. Specifically, Cruciate Retaining (CR) and Posterior Stabilized (PS) Lospa Knee System (Corentec Inc.) were implanted and tested sequentially using internal control experimental design. The muscle loading was determined based on the physiological cross-sectional area ratio of the quadriceps and hamstring muscles. The ratios were then applied to CDC data representing the average male height and used to simulate a BMI of 25, 30, and 35 at knee flexion angles (KFA) of 15, 30, 45, 60, 75, and 90 degrees. Patellofemoral and tibiofemoral joint contact areas and pressures were measured using the K-scan sensor system (Tekscan Inc, South Boston, MA). Contact area, force, pressure and peak contact pressure were obtained and analyzed for each specimen. Knee kinematics were quantified using a Microscribe 3DLX digitizer (Revware Inc, Raleigh, North Carolina). Repeated measure analysis of variance with a Tukey post hoc test was used to compare loading conditions. Comparisons between the CR and PS TKA groups were made with a paired INTRODUCTION
METHODS
BHA is popular surgery for femoral neck fractures expecially elderly patients. However, clinical results are variable that factors affecting results are questionable. Therefore we investigated radiologic fators, dysplastic hip whether influences results of BHA. Between 2004 and 2009, 200 patients undergoing bipolar hemiarthroplasty for femoral neck fracture were divided two groups; a lateral center edge (LCE) angle of < 16 degree or > 16 degree on anteroposterior radiographs. All surgical procedures were performed by a single surgeon. Dermogrpahic data, the harris hip score, WOMAC index, Koval activity level, and complication were recorded. The minimum follow up interval was 4 years (mean, 7.8 years).Background
Methods
The purpose of this study was to evaluate the results of modular revision stems, uncemented fluted, tapered to treat periprosthetic femoral (PFF) fracture; we specifically evaluated fracture union, implant stability, patient outcomes, and complications to compare the differences between cemented and cementless primary stem. We retrospectively reviewed 56 cases of unstable periporsthetic femoral fracture (forty B2 and sixteen B3) treated with the uncemented fluted and tapered modular distal fixation stem with or with or without autogenous bone graft. Clinical outcomes were assessed with Harris Hip Score and WOMAC score. Radiologic evaluations were conducted using Beals and Tower's criteria. Any complication during the follow-up period was recorded.Purpose
Materials and Methods
The implantation of scaffold-free CTE from suspension culture into growth-plate defects resulted in a significant reduction in growth arrest of the rabbit tibia In childhood and adolescence, the growth plate injury can cause partial premature arrest of growth plate, which can make problems such as leg length discrepancy and angular deformity. Bone bridge resection and variable implantation materials such as fat, bone wax, silastic and craniopalst has been investigated. However, those procedures may show limitations including the control of bone growth and long term safety of implant materials in vivo. As an alternative, homogeneous or heterogeneous cartilage cells and stem cell transplants have been tried. In this method, scaffold for cell transplantation is needed. But, so far the most suitable scaffold has not been established. Recently, some authors generated a cartilage tissue equivalent (CTE) using a suspension culture with biophysical properties similar to native hyaline cartilage. Therefore we are able to transplant the CTE without scaffold to the physeal defect. The purpose of this study was to investigated the effects of a transplantation of a vitro-generated scaffold-free tissue-engineered cartilage tissue equivalent (CTE) using a suspension chondrocyte culture in a rabbit growth arrest model.Summary Statement
Introduction
To investigate the effectiveness of avulsion fracture of tibial insertion of posterior cruciate ligament using the safe postero-medial approach through analyzing the clinical and radiographic outcomes. We treated 14 cases of acute PCL tibial avulsion fracture with “safe postero-medial approach”. The PCL and avulsion bony fragment was fixed with 1 cannuated screw and washer. The patients were assessed clinically and radiographically at 3 months, 6 months, and 12 months. Clinical examination for each visit included assessment of the knee range of motion, using goniometer and the posterior drawer test. The patients were evaluated according to the Lysholm and Tegner rating scales. Patients were followed-up for 12 to 16 months. X-ray showed that satisfactory reducdtion and bony healing was achieved in all cases. There was no neurovascular complication. All patients had negative posterior drawer tests. Excellent outcomes were reported by all patients with the Lysholm score system. And there was no signicant difference between the Tegner scores before injury and last follow-up. Surgical treatment of acute tibial avulsion fracture of the PCL with this approach can restore the stability and fuction of the joint safely in most patients without neurovascular complication. Therefore “safe postero-medial approach” may be suitable for the treatment of isolated tibial avulsion fracture of the PCL.
Total hip arthroplasty (THA) is extremely effective in treating debilitating arthritic conditions of the hip. With the many modular prosthetic designs available, surgeons can now precisely construct mechanical parameters such as femoral offset (FO). Although several studies have investigated relationships between offset choice and hip abductor strength, hip range of motion, and prosthetic wear rate, there is scarce data on the effect of FO on pain and functional outcomes following THA. The objective of this study was to assess the effect of restoring FO (within varying degrees compared to the contralateral non-diseased hip [CL]) on physical function, mental well-being, pain, and stiffness outcomes as measured by the Short Form 12 Health Survey (SF-12) and Western Ontario and McMaster University Osteoarthritis Index (WOMAC) at post-operative follow-up. We prospectively collected data on 249 patients that underwent unilateral THA with no or minimal disease of the contralateral hip. Baseline data collection included: age, gender, diagnosis, femoral head size, type of stem, and pre-operative SF-12 and WOMAC scores. Post-operative SF-12 and WOMAC scores were recorded during annual follow-up visits. Post-operative FO was retrospectively measured on standard anteroposterior (AP) pelvis radiographs and compared to FO of CL. FO was measured as the perpendicular distance from the femoral head center of rotation to the anatomic axis of the femur with appropriate adjustments made for image magnification. Patients were categorized into one of three groups: decreased femoral offset (dFO, less than −5 mm compared to CL), normal femoral offset (nFO, between −5 and +5 mm of CL), and increased femoral offset (iFO, greater than +5 mm compared to CL).Introduction:
Methods:
There are some concerns about doing hip resurfacing arthroplasty in ONFH due to bone defect which can cause mechanical weakness of femoral component and highly active young age of patients which can cause high wear rate and failure rate. The purpose of this study is to verify the HRA is safe procedure in ONFH in the aspect of mechanical and biological issue. Between December 1998 and May 2005, 185 hips of 169 patients underwent MoM HRA using Birmingham Hip Resurfacing System® at single center. 166 hips (26 hips of female, 140 hips of male) of 144 patients have been reviewed for at least 7 years after MoM HRA. Mean follow-up period was 101.8 (84–178) months. Their mean age at the time of operation was 37.7(16–67) years old. Clinically, Harris hip scores (HHS), UCLA activity scores and range of motion were evaluated. Radiologically, the extent of necrotic area in preoperative MRI and radiolucency around implants, narrowing of retained neck, impingement, stress shielding, and heterotopic ossification were evaluated in the serial anteroposterior and groin lateral radiographs of hip. Complications were defined as joint dislocation, infection, implant loosening, femoral neck fracture and pseudotumor. Failure was defined as revision arthroplasty due to the complications.Purpose
Materials and Methods
To evaluate the accuracy of the alignment of lower extremity in 661 cases of total knee replacement arthroplasty (TKA) using navigation system. From June 2006 to September 2008, 661 cases (431 patients) of TKA using navigation system were operated. To analyze the mechanical axis, the weight bearing full length lower extremity radiographs were taken preoperatively and 3 weeks after the operation. The results from a well- experienced surgeon (423 cases) were compared with those from a less-experienced surgeon (238 cases), and they both used the navigation.Purpose
Materials and method
To evaluate the radiological changes after metal on metal resurfacing arthroplasty. Between December 1998 and August 2004, 166 hips in 150 patients who underwent metal resurfacing arthroplasty and followed up more than 4 years. Their mean age at the time of operation was 37.3 years(range, 15–68 years) and mean period of follow-up was 6.1 years(range, 48–95 months). The cause of arthroplasty included 115 avascular necrosis, 43 osteoarthritis, 7 ankylosing spondylitis, 1 haemophilic arthropathy. All patients had anteroposterior, translateral radiographs of the hip made preoperatively and each follow-up visit, and we analyzed radiographic findings such as radiolucencies or impingement signs around implant, neck narrowing and heterotopic ossification.Purpose
Materials and Methods
In general, the amount and rate of linear wear are associated with femoral head size in the conventional UHMWPE acetabular liner. The smaller the femoral head, the higher the linear wear rate. The aim of this study is to verify the relationship between wear rate and femoral head size and the polyethylene cup thickness. We conducted a retrospective review of all patients who had undergone primary cementless total hip arthroplasty using the conventional UHMWPE (HGP2) acetabular liner between July 1992 and December 2002. 128 hips (34 hips of female, 94 hips of male) of 64 patients who had 28 mm femoral head with different polyethylene acetabular linear thickness and 102 hips (41 hips of female, 61 hips of male) of 81 patients with 22 mm femoral head were included. Patients were assessed clinically and radiographically at postop 6 weeks, 3 months, 6 months and annually thereafter. Clinical assessment was performed using Harris Hip Score. Radiographic analysis included measurement of acetabular component position, polyethylene wear using a validated radiographic technique (Dorr method). Their mean age at the time of operation was 45.3 (24–81) years old and mean follow-up period was 10.8 (96–144 months) years.Purpose
Materials and Methods
Many literatures regarding more specific tests to diagnose the supraspinatus tendon injuries and the best rehabilitation methods to strengthen the supraspinatus have been published. However, conflicting results have been reported. 2-deoxy-2-[18F] fluoro-D-glucose (FDG) positron emission tomography (PET) has been recently used to assess skeletal muscle activities in various fields. To evaluate & compare the metabolic activities of deltoid & rotator cuff muscles after the full-can & empty-can exercises using PET-CT.Introduction
Purpose
The aim of this study was to prospectively assess the results of a preoperative surgical safety checklist by comparing the initial phase of implementation of the Time Out Procedure (TOP) to the results four years later. We compared the accuracy and acceptance of the TOP to determine whether surgical practice had changed. The TOP was initiated for all elective surgical procedures performed in Christchurch in 2004. An initial audit from September 2004 – April 2005 (Phase 1) was compared to one from October 2008-September 2009 (Phase 2) looking for an improvement in completion of the procedure. Variances were recorded and analysed within the categories of 1 System and process 2 Consent and limb marking 3Incorrect details and 4 Near miss. A questionnaire was also sent to all the surgeons to determine their attitude towards the TOP. Although the TOP was completed more often in Phase 2 (98%, p<0.001) there were more variances (9%, p<0.001). The commonest variance was due to the surgeon and assistant not being present at the TOP which was significantly worse than in Phase 1 (p<0.0001). The results of the surgeon questionaire showed that only 88% agreed that the TOP was valuable in preventing wrong site surgery. This surgical indifference to the TOP is difficult to explain especially when National and International agencies have stressed its role in preventing surgical error. The recent introduction of the expanded WHO Checklist should be ‘surgeon led’ to be effective.
In patients with osteoporosis there is always
a strong possibility that pedicle screws will loosen. This makes
it difficult to select the appropriate osteoporotic patient for
a spinal fusion. The purpose of this study was to determine the
correlation between bone mineral density (BMD) and the magnitude
of torque required to insert a pedicle screw. To accomplish this,
181 patients with degenerative disease of the lumbar spine were
studied prospectively. Each underwent dual-energy x-ray absorptiometry
(DEXA) and intra-operative measurement of the torque required to
insert each pedicle screw. The levels of torque generated in patients
with osteoporosis and osteopenia were significantly lower than those
achieved in normal patients. Positive correlations were observed between
BMD and T-value at the instrumented lumbar vertebrae, mean BMD and
mean T-value of the lumbar vertebrae, and mean BMD and mean T-value
of the proximal femur. The predictive torque (Nm) generated during pedicle
screw insertion was [-0.127 + 1.62 × (BMD at the corresponding lumbar
vertebrae)], as measured by linear regression analysis. The positive
correlation between BMD and the maximum torque required to insert
a pedicle screw suggests that pre-operative assessment of BMD may
be useful in determining the ultimate strength of fixation of a
device, as well as the number of levels that need to be fixed with
pedicle screws in patients who are suspected of having osteoporosis.
MRI was used to diagnose occult hip pathology in patients with a clinically suspected femoral neck fracture where no abnormality was detected on plain x-ray. All patients admitted into our unit with post traumatic hip pain, an inability to weight bear, and no abnormality found on a series of plain radiographs, underwent an MRI scan of the pelvis and affected hip to look for an occult femoral neck fracture. The study included 102 consecutive patients who were prospectively studied over a 10 year period between 1997 and 2007. Four patients were excluded due to contraindications or an inability to tolerate having an MRI scan. Of the remaining 98 patients 81 had abnormalities detected (83%). 42 of these patients had evidence of a proximal femoral fracture. 23 patients underwent an operative procedure. Eight incomplete intertrochanteric fractures were treated non-operatively with good results. One patient had a primary diagnosis of malignancy made on the basis of the MRI scan. One patient had a known primary malignancy but this was the first diagnosis of bony metastatic disease. Seventy five patients were scanned within 48 hours of admission (average 2.4 days). The use of MRI in our unit was felt to be appropriate in patients with a high suspicion of proximal femoral fracture. Our results show that there is a significant incidence of fractures that are not apparent on plain x-rays. MRI led to early diagnosis and initiation of definitive management, potentially reducing cost and complications of immobility. It was most useful in showing the extent of the fracture, and picked up on other occult pathologies of the hip and pelvis. We recommend stabilisation of femoral neck fractures and non operative management of all incomplete intertrochanteric fractures if able to non weight bear. There must be a high index of suspicion of undiagnosed malignancy
Spontaneous osteonecrosis of the knee (SONK) is a distinct clinical condition occurring in patients without any associated risk factors. There is controversy as to the best method of treatment, and the available literature would suggest that patients with SONK have a worse outcome. We evaluated the clinical and radiographic outcomes of unicompartmental knee arthroplasty using Oxford prosthesis in patients with spontaneous osteonecrosis Between September 2002 and March 2008, 20 knees (18 patients) with SONK were treated with Oxford unicompartmental knee arthroplasty. There were fifteen women and three men with a mean age of 61.1 years old. The mean follow up was 37 months. The clinical assessment was performed using the American knee society score rating system. The preoperative radiography and MRI were analyzed according to size and stage of the osteonecrotic lesion and the osteoarthritic changes. Postoperatively, new osteonecrotic lesion, loosening of implant, subsidence, arthritic changes of other compartment were recorded. The mean preoperative knee score and the knee function score were 52.5 and 56.0 points, respectively. The knee score was improved to 89.2 points (p <
0.05) and the knee function score was also improved to 85.2 points (p <
0.05) at last follow up. There were no implant failures. There was no new necrotic lesion in the lateral compartment, loosening, subsidence and arthritic change. The Oxford Unicompartmental knee arthroplasty for spontaneous osteonecrosis of the knee provided satisfactory clinical and radiological results in a short to medium term. However, a longer term follow up will be needed.
Our center has performed hip replacement arthroplasties since 1997. The purpose of this study was to assess the long term clinicoradiological results of a total hip replacement using the double tapered Mallory-Head system. The results of a consecutive series of 81 total hip replacements in 75 patients were reviewed three to eleven years (average eight years) postoperatively. The diagnosis were avascular necrosis for 46 hips (57%), osteoarthritis for 12 hips (15%), RA for 9 hips (11%), and others. The clinical result was evaluated on the basis of the modified Harris hip score, modified Merle d’Aubigné-Postel score. A detailed radiographic analysis was also performed. The average modified Harris hip score improved from 56 points to 92 points. The average modified Merle d’Aubigné-Postel score was 15 points at the latest follow up, and 55 hips(68%) were classified as the clinical grades of excellent or good results. Two acetabular components were revised because of loosening, and one was revised because of recurrent dislocation. We concluded that the clinical and radiological evaluations of the total hip replacements, using the Mal-lory-Head system showed good results with mid-term follow-up.
The purpose of this study was to review the total ankle arthroplasties performed in consecutive series of 78 ankles and to determine the short-term results in cases with over 12 months follow-up. Preoperative diagnoses were post-traumatic osteoarthritis in 40 ankles (51.3%), primary osteoarthritis in 32 ankles (41.0%), and systemic arthritis in six ankles (7.7%). HINTEGRA® (Newdeal SA, Lyon, France) total ankle system was used in all cases Fifty-five total ankle arthroplasties including four revision cases, followed up for over 12 months (range, 13~49 months) were included in this study. Ankles were divided into three groups according to the coronal plane deformity in preoperative standing ankle AP radiograph; Varus (≥10°; 20 ankles (39.2%)), neutral (<
10° varus or valgus; 25 ankles (49%)), and valgus (≥10° valgus; 6 ankles (11.8%)). Various additional surgeries were performed simultaneously with the arthroplasty to correct the deformities; deltoid ligament release (25 cases), posterior tibialis tendon lengthening (2 cases), peroneus longus tendon transfer to brevis (5 cases), lateral ankle reconstruction with modified Broström procedure (4 cases), lateral closed-wedge calcaneal osteotomy (3 cases), percutaneous heel cord lengthening (19 cases), and gastrocnemius recession (1 case). In one patient with severe valgus deformity, staged total ankle arthroplasty was conducted after primary triple arthrodesis. Preoperative and postoperative visual analogue scale (VAS), American Orthopaedic Foot and Ankle Society (AOFAS) score, range of motion (ROM), as well as patient’s satisfaction and willingness to receive the operation again were evaluated The results were compared among the three groups. Serial radiographs were reviewed for any radiological changes. AOFAS score has improved from 54.3 ± 11.4 pre-operatively to 79.2 ± 11.4 at last follow-up. VAS has decreased from 6.8 ± 1.6 to 3.2 ± 1.6. Mean improvement in ROM was 15.6 ± 16.2 degrees. Forty-eight cases (873%) were satisfied with excellent or good results and 49 cases (89.1 %) were willing to receive the operation again. No significant differences in the postoperative VAS (p=0.14), AOFAS score (p=0.79), and ROM (p=0.06) were found among the three groups. Hetero-topic ossifications were observed in 12 cases (23.5%) and periosteal reactions proximal to medial malleolus occurred in four cases (7.8%). Perioperative complications include one intraoperative medial malleolus fracture which was successfully managed with two cannulated-screws, and one medial malleolar stress fracture at six weeks after surgery which has healed spontaneously. One case with osteolysis around tibial screws was managed with bone graft. One case with deep fungal infection was converted to arthrodesis after infection control. Four ankles had to be revised including three cases of polyethylene bearing change due to dislocation, and one case of tibial component and bearing change due to loosening. The patient with revised tibial component was converted to arthrodesis due to recurred loosening. The Kaplan-Meier cumulative survival rate was 90.9% at 12 months and 87.8% at 49 months postoperatively. The short term clinical results of HINTEGRA ankles showed favorable results. No significant differences were observed among different groups of coronal plane deformities when adequate additional surgeries were performed simultaneously. Long term follow-up study is required.
Although the clinical manifestation of ONFH is well summarized as forms of various stages, its etiology, natural history or epidemiology has not been clearly elucidated yet. With this study, we wanted to find out the estimated annual incidence, epidemiologic characteristics and the effect of known risk factors of ONFH. Therefore we can understand the disease better to provide optimal management to the patients. Among 133 189 patients who diagnosed as osteonecrosis of femoral head (ONFH) in database of national health insurance system in Korea from 2002 to 2006, three hundreds an eighty-two samples were randomly extracted with 5% error range in 95% confidence interval. With a structured worksheet, medical records and radiographs of each sample were reviewed at corresponding clinic or hospital by authors and trained orthopedic surgeons. With these data, we calculated the prevalence and associated risk factors. The mean number of annual requests was 23 466. Among 382 samples, two hundreds and seventy-four were confirmed to have ONFH. Diagnostic accuracy was 71.7 %. Diagnosis was more accurate when the patient was male or hospitalized. After the logistic regression analysis, calculated diagnostic accuracy during 2002 and 2006 was 60.3% (51 823/85 987). The annual predicted number of cases of ONFH during this period was 14 103. It corresponds to 28.91 patients per 100 000 populations. Alcohol abuse was noted in 45% and 22% was related to use of steroid. 37% showed bilateral involvement. Bone graft procedures in any kind was the most frequently performed joint preserving procedure. With this, the first epidemiologic study for ONFH in Korea, we estimated nationwide annual prevalence of ONFH as 28.91 per 100,000 populations during 2002 and 2006. There is an absolute male predominance. Alcohol abuse is the most frequent risk factors. We believe that this result can serve as a baseline data for understanding the epidemiology, clinical characteristics and treatment of ONFH.
Modular femoral stem provides significant flexibility in total hip revision arthroplasty. There have been few clinical studies that have dealt with modular stem. We have evaluated the clinical and radiographic performance of 59 patients with distal fix modular Link MP stem. The average follow-up period was 6.4 years. The average Harris hip score was improved from 47 to 87.6. Of 19 patients with trochanteric osteotomy, greater trochanter was displaced in four patients. Re-revision was done to five patients. Three were for subsidence, one of them showed dissociation of the coupling part and the other two were for a nonunion of osteotomy site. There was no statistical relation (p=0.40) between stem subsidence and bone deficiency; the subsidence may have been too small for the canal. As a result of last follow-up, survival rate was 91.5 %(CI 95%, 89–101), but there was no case of recurrent dislocation or femoral stem fracture.
An MR scan was performed on all patients who presented to our hospital with a clinical diagnosis of a fracture of the proximal femur, but who had no abnormality on plain radiographs. This was a prospective study of 102 consecutive patients over a ten-year period. There were 98 patients who fulfilled our inclusion criteria, of whom 75 were scanned within 48 hours of admission, with an overall mean time between admission and scanning of 2.4 days (0 to 10). A total of 81 patients (83%) had abnormalities detected on MRI; 23 (23%) required operative management. The use of MRI led to the early diagnosis and treatment of occult hip pathology. We recommend that incomplete intertrochanteric fractures are managed non-operatively with protected weight-bearing. The study illustrates the high incidence of fractures which are not apparent on plain radiographs, and shows that MRI is useful when diagnosing other pathology such as malignancy, which may not be apparent on plain films.
