Nearly one quarter of ankle fractures have a recognized syndesmosis injury. An intact syndesmosis ligament complex stabilizes the distal tibio-fibular joint while allowing small, physiologic amounts of relative motion. When injured, malreduction of the syndesmosis has been found to be the most important independent factor that contributes to inferior functional outcomes. Despite this, significant variability in surgical treatment remains. This may be due to a poor understanding of normal dynamic syndesmosis motion and the resultant impact of static and dynamic fixation on post-injury syndesmosis kinematics. As the syndesmosis is a dynamic structure, conventional CT static images do not provide a complete picture of syndesmosis position, giving potentially misleading results. Dynamic CT technology has the ability to image joints in real time, as they are moved through a range-of-motion (ROM). The aim of this study was to determine if syndesmosis position changes significantly throughout ankle range of motion, thus warranting further investigation with dynamic CT.

This is an a priori planned subgroup analysis of a larger multicentre randomized clinical trial, in which patients with AO-OTA 44-C injuries were randomized to either Tightrope or screw fixation. Bilateral ankle CT scans were performed at 1 year post-injury, while patients moved from maximal dorsiflexion (DF) to maximal plantar flexion (PF). In the uninjured ankles, three measurements were taken at one cm proximal to the ankle joint line in maximal DF and maximal PF: Anterior (ASD), middle (MSD), and posterior (PSD) syndesmosis distance, in order to determine normal syndesmosis position. Paired samples t-tests compared measurements taken at maximal DF and maximal PF.

Twelve patients (eight male, six female) were included, with a mean age of 44 years (±13years). The mean maximal DF achieved was 1-degree (± 7-degrees), whereas the mean maximal PF was 47-degrees (± 8-degrees). The ASD in DF was 3.0mm (± 1.1mm) versus 1.9mm (± 0.8mm) in PF (p<0.01). The MSD in DF was 3.3mm (±1.1mm) versus 2.3mm (±0.9mm) in PF (p<0.01). The PSD in DF was 5.3mm (±1.5mm) versus 4.6mm (±1.9mm) in PF (p<0.01). These values are consistent with the range of normal parameters previously reported in the literature, however this is the first study to report the ankle position at which these measurements are acquired and that there is a significant change in syndesmosis measurements based on ankle position.

Normal syndesmosis position changes in uninjured ankles significantly throughout range of motion. This motion may contribute to the variation in normal anatomy previously reported and controversies surrounding quantifying anatomic reduction after injury, as the ankle position is not routinely standardized, but rather static measurements are taken at patient-selected ankle positions. Dynamic CT is a promising modality to quantify normal ankle kinematics, in order to better understand normal syndesmosis motion. This information will help optimize assessment of reduction methods and potentially improve patient outcomes. Future directions include side-to-side comparison using dynamic CT analysis in healthy volunteers.

The optimal management of rotationally-unstable ankle fractures involving the posterior malleolus remains controversial. Standard practice involves trans-syndesmotic fixation (TSF), however, recent attention has been paid to the indirect reduction of the syndesmosis by repairing small posterior malleolar fracture avulsion fragments, if present, using open reduction internal fixation. Posterior malleolus fixation (PMF) may obviate the need for TSF. Given the limited evidence and diversity in surgical treatment options for rotationally-unstable ankle fractures with ankle syndesmosis and posterior malleolar involvement, we sought to assess the research landscape and identify knowledge gaps to address with future clinical trials.

We performed a scoping review to investigate rotational ankle fractures with posterior malleolar involvement, utilizing the framework originally described by Arksey and O'Malley. We searched the English language literature using the Ovid Medline and Embase databases. All study types investigating rotationally-unstable ankle fractures with posterior malleolus involvement were categorized into defined themes and descriptive statistics were used to summarize methods and results of each study.

A total of 279 articles published from 1988 to 2018 were reviewed, and 70 articles were included in the final analysis. The literature consists of studies examining the surgical treatment strategies for PMF (n=21 studies, 30%), prognosis of rotational ankle fractures with posterior malleolar involvement (n=16 studies, 23%), biomechanics and fracture pattern of these injuries (n=13 studies, 19%), surgical approach and pertinent anatomy for fixation of posterior malleolus fractures (n=12 studies, 17%), and lastly surgical treatment of syndesmotic injuries with PMF compared to TSF (n=4 studies, 6%). Uncontrolled case series of single treatment made up the majority of all clinical studies (n=44 studies, 63%), whereas controlled study designs were the next most common (n=16 studies, 23%). Majority of research in this field has been conducted in the past eight years (n=52 studies, 74%).

Despite increasing concern and debate among the global orthopaedic community regarding rotationally-unstable ankle fractures with syndesmosis and posterior malleolar involvement, and an increasing trend towards PMF, optimal treatment remains unclear when comparing TSF to PMF. Current research priorities are to (1) define the specific injury pattern for which PMF adequately stabilizes the syndesmosis, and (2) conduct a randomized clinical trial comparing PMF to TSF with the assistance of the orthopaedic community at large with well-defined clinical outcomes.

Given the high prevalence of psychiatric illness in the total joint arthroplasty (TJA) population, relatively little is known about how these two conditions affect each other. Therefore, the purpose of this study is to evaluate the role of major psychiatric illness on patient specific outcomes after TJA. We hypothesize that patients with major psychiatric illnesses will report inferior outcomes and have more complications after TJA compared to those without any psychiatric illness.

We matched and compared two cohorts of patients undergoing TJA from a prospectively collected database registry, which included those with and without a major psychiatric disorder. Major psychiatric disorder was identified in the registry database by determining if patients had been formally diagnosed with any of the following conditions: bipolar disorder, major personality disorder, chronic mental health diagnoses, depression, or schizophrenia. Primary outcomes of interest included patient specific outcomes measured using the WOMAC or EQ5D. Secondary outcomes included complications, infections, hospital length of stay, 30-day readmission rates and final discharge destination.

In total we included 1828 TJAs (1000 THAs, 828 TKAs). In terms of the primary outcome, both the THA experimental group (37.80 ± 17.91 vs. 40.74 ± 19.3, p=0.023) and TKA experimental group (43.38 ± 18.41 vs 45.45 ± 20.07, p=0.050) had significantly lower preoperative WOMAC scores compared to their respective control groups. At the 3-month period both the THA experimental group (76.74 ± 16.94 vs. 79.16 ± 16.19, p=0.036) and TKA experimental group (71.09 ± 18.64 vs. 75.92 ± 16.22, p=0) again had significantly lower 3-month postoperative WOMAC score. Clinical outcomes at the 1-year mark were similar for both groups in terms of WOMAC and EQ5D. Patients with psychiatric illness were more likely to have increased LOS and non-routine discharge from hospital. In the THA subset, the experimental group had an increased LOS by 1.43 days (p=0.0028), in the TKA subset, the experimental group had an increased LOS by 0.77 days (p= 0.050). In terms of non-routine discharge, the THA experimental group was discharged home 86.9% of the time compared to the control group at 91.8% (p=0.024). In the TKA subset, the experimental group was discharged home 87.6% of the time compared to the control group at 92% (p=0.022). There were no other differences between the two subsets in regards to transfusions, 30-day readmissions, infections, mechanical adverse events, and medical complications.

In conclusion, our results demonstrate that psychiatric illness can result in worse outcomes in the early perioperative period after TJA, although outcomes are equivalent 1 year postoperatively. Patients with psychiatric illness can be expected to gain significant improvements in outcome after surgery that are comparable to a baseline population without psychiatric illness. Nonetheless, patients with psychiatric illness are at increased risk of delayed discharge and non-routine discharge. As such, they may require personalized care post-operatively, and should be counseled accordingly. Based on our results, psychiatric illness should not be an impediment to proceeding with TJA.

Advances in orthopaedic surgery have led to minimally invasive techniques to decrease patient morbidity by minimizing surgical exposure, but also limits direct visualization. This has led to the increased use of intraoperative fluoroscopy for fracture management. Unfortunately, these procedures require the operating surgeon to stay in close proximity to the patient, thus being exposed to radiation scatter. The current National Council on Radiation Protection recommends no more than 50 mSv of radiation exposure to avoid ill-effects. Risks associated with radiation exposure include cataracts, skin, breast and thyroid cancer, and leukemia. Despite radiation protection measures, there is overwhelming evidence of radiation-related diseases in orthopaedic surgeons. The risk of developing cancer (e.g. thyroid carcinoma and breast cancer) is approximately eight times higher than in unexposed workers. Despite this knowledge, there is a paucity of evidence on radiation exposure in orthopaedic surgery residents, therefore the goal of this study is to quantify radiation exposure in orthopaedic surgery residents.

We hypothesize that orthopaedic surgery residents are exposed to a significant amount of radiation throughout their training. We specifically aim to: 1) quantify the amount of radiation exposure throughout a Canadian orthopaedic residency training program and 2) determine the variability in resident radiation exposure by rotation assignment and year of training.

This ongoing prospective cohort study includes all local orthopaedic surgery residents who meet eligibility criteria. Inclusion criteria: 1) adult residents in an orthopaedic surgery residency program. Exclusion criteria: 1) female residents who are pregnant, and 2) residents in a non-surgical year (i.e. leave of absence, research, Masters/PhD). After completion of informed consent, each eligible resident will wear a dosimeter to measure radiation exposure in a standardized fashion. Dosimeters will be worn on standardized lanyards underneath lead protection in their left chest pocket during all surgeries that require radiation protection. Control dosimeters will be worn on the outside of each resident's scrub cap for comparison. Dosimeter readings will then be reported on a monthly and rotational basis. All data will be collected on a pre-developed case report form. All data will be de-identified and stored on a secure electronic database (REDCap). In addition to monthly and rotational dosimeter readings, residents will also report sex, height, level of training, parental status, and age for secondary subgroup analyses. Residents will also report if they have personalized lead or other protective equipment, including lead glasses. Resident compliance with dosimeter use will be measured by self report of >80% use on operative days. Interim analysis will be performed at the 6-month time point and data collection will conclude at the 1 year time point.

Data collection began in July 2018 and interim 6-month results will be available for presentation at the CORA annual meeting in June 2019.

This is the first prospective study quantifying radiation exposure in Canadian orthopaedic residents and the results will provide valuable information for all Canadian orthopaedic training programs.

Three dimensional printing is an emerging new technology in medicine and the current educational value of 3D printed fracture models is unknown. The delayed surgery and need for CT imaging make calcaneal fractures an ideal scenario for preoperative 3D printed (3Dp) fracture models. The goal of this study is to assess if improvements in fracture understanding and surgical planning can be realized by trainees when they are given standard CT imaging and a 3Dp model compared to standard CT imaging and a virtual 3D rendering (3D CT).

Ethics approval was granted for a selection of calcaneal fracture imaging studies to be collected through a practice audit of a senior orthopaedic trauma surgeon. 3Dp models were created in house. Digital Imaging and Communications in Medicine (DICOM) files of patient CT scans were obtained from local servers in an anonymized fashion. DICOM files were then converted to .STL models using the Mimics inPrint 2.0 (Materialise NV, Leuven, Belgium) software. Models were converted into a .gcode file through a slicer program (Simplify3D, Blue Ash, OH USA). The .gcode files were printed on a TEVO Little Monster Delta FDM printer (TEVO USA, CO USA) using 1.75mm polylactic acid (PLA) filament.

Study participants rotated through 10 workstations viewing CT images and either a digital 3D volume rendering or 3Dp model of the fractured calcaneus. A questionnaire at each workstation assessed fracture classification, proposed method of treatment, confidence with fracture understanding and satisfaction with the accuracy of the 3Dp model or 3D volume rendering. Participants included current orthopaedic surgery trainees and staff surgeons.

A total of 16 residents and five staff completed the study. Ten fracture cases were included in the analysis for time, confidence of fracture understanding, perceived model accuracy and treatment method. Eight fracture cases were included for assessment of diagnosis. There were no cases that obtained universal agreement on either Sanders classification or treatment method from staff participants. Residents in their final year of studies had the quickest mean time of assessment (60 +/− 24 sec.) and highest percentage of correct diagnoses (83%) although these did not reach significance compared to the other residency years. There was a significant increase in confidence of fracture understanding with increasing residency year. Also, confidence was improved in cases where a 3Dp model was available compared to conventional CT alone although this improvement diminished with increasing residency year. Perceived accuracy of the cases with 3Dp models was significantly higher than cases without models (7 vs 5.5 p < 0.0001).

This is the first study to our knowledge to assess trainee confidence as a primary outcome in the assessment of the educational value of 3Dp models. This study was able to show that a 3Dp model aides in the perceived accuracy of fracture assessment and showed an improvement in trainee confidence, although the effect on confidence seems to diminish with increasing residency year. We propose that 3D printed calcaneal fracture models are a beneficial educational tool for junior level trainees and the role of 3Dp models for other complex orthopaedic presentations should be explored.

It is estimated that a quarter to half of all hospital waste is produced in the operating room. Recycling of surgical waste in the perioperative setting is largely underutilized, despite the fact that many of the materials being discarded can be potentially recycled safely and easily. Given this mounting waste production, recycling programs have become increasingly popular. Therefore, the primary objective of this study is assess the effect of these recent eco-friendly polices by determining the amount of waste and recycling produced in the pre-operative and operative time period for several orthopaedic subspecialties.

Surgical cases were prospectively chosen and assigned to an orthopaedic subspecialty category, which included trauma, arthroplasty, sports, foot and ankle, upper extremity, and paediatrics. The preoperative phase began with the opening of the surgical case carts and concluded with the end of skin preparation. The intraoperative period began after skin preparation was complete, and concluded after the operating room was cleaned. At the end of the preoperative period all surgical waste was weighed and divided into recyclables and non-recyclables. Following the intraoperative period, surgical waste was divided into recyclables, non-recyclables, linens, and biohazardous waste streams. All bags were weighed in a standardized fashion using a portable hand held scale. The primary outcome of interest was the amount of recyclable waste produced per case. Secondary outcomes included the amount of nonrecyclable, biohazardous and total waste produced during the same time intervals. Statistical analysis was then completed using (ANOVA) to detect differences between specialties.

This study included 55 procedures collected over a 1-month period at two hospitals from October 2017 to November 2017. A total of 341 kg of waste was collected with a mean mass of 6.2 kg per case. In terms of primary outcomes, arthroplasty surgery produced a significantly greater amount of recyclable waste per case in the preoperative (2327.9 g)and intraoperative (938.6 g)period. It also produced the greatest amount of total recyclable waste per case, resulting in a significantly greater ratio of waste recycling per case then nearly all other specialties in the preoperative (86.2%) and intraoperative period (14.5%). In terms of secondary outcomes, arthroplasty surgery similarly produced a significantly greater amount of nonrecyclable waste per case then all other specialties (5823.6 g), the majority of which was produced during the intraoperative period (5512.9 g). Arthroplasty surgery also produced a significantly greater amount of biohazardous waste then all other specialties (409.3 g). The majority of surgical waste was produced in the intraoperative period compared to the preoperative period. In the preoperative period an average of 74.4% of waste was recyclable, compared to 7.6% of waste produced during the intraoperative period. In total, the average amount of waste recycled per case was 25.6%. Biohazardous waste only constituted 1.8% of the total waste mass.

Orthopaedic surgery is a significant source of waste production in our hospital system. Among orthopaedic subspecialties, arthroplasty is one of the largest waste producers, but also has the highest potential for recycling of materials. Effective OR recycling programs can significantly reduce our ecological footprint by diverting waste from landfills. In particular, the preoperative period has significant potential for landfill diversion as our study showed that nearly three quarters of all waste in this period can be effectively recycled.

Aims

Dislocation is the most common indication for further surgery following total hip arthroplasty (THA) when undertaken in patients with a femoral neck fracture. This study aimed to assess the complication rates of THA with dual mobility components (THA-DMC) following a femoral neck fracture and to compare outcomes between THA-DMC, conventional THA, and hemiarthroplasty (HA).