Introduction

Management of Vancouver type B1 and C periprosthetic fractures in elderly patients requires fixation and an aim for early mobilisation but many techniques restrict weightbearing due to re-fracture risk. We present the clinical and radiographic outcomes of our technique of total femoral plating (TFP) to allow early weightbearing whilst reducing risk of re-fracture.

Aim

It is unclear if the prevalence of resistance organisms causing (PJI) in total hip/knee arthroplasty is different among North/South American and European countries. Therefore, we sought to compare causative organisms, rates of resistant organisms, and polymicrobial infections in hospitals in North/South America, and Europe.

Objectives

Mechanical wear and corrosion at the head-stem junction of total hip arthroplasties (THAs) (trunnionosis) have been implicated in their early revision, most commonly in metal-on-metal (MOM) hips. We can isolate the role of the head-stem junction as the predominant source of metal release by investigating non-MOM hips; this can help to identify clinically significant volumes of material loss and corrosion from these surfaces.

Aims

There are many guidelines that help direct the management of patients with metal-on-metal (MOM) hip arthroplasties. We have undertaken a study to compare the management of patients with MOM hip arthroplasties in different countries.

Knee arthrodesis is a potential salvage procedure for limb preservation after failure of total knee arthroplasty (TKA) due to infection. In this study, we evaluated the outcome of single-stage knee arthrodesis using an intramedullary cemented coupled nail without bone-on-bone fusion after failed and infected TKA with extensor mechanism deficiency. Between 2002 and 2012, 27 patients (ten female, 17 male; mean age 68.8 years; 52 to 87) were treated with septic single-stage exchange. Mean follow-up duration was 67.1months (24 to 143, n = 27) (minimum follow-up 24 months) and for patients with a minimum follow-up of five years 104.9 (65 to 143,; n = 13). A subjective patient evaluation (Short Form (SF)-36) was obtained, in addition to the Visual Analogue Scale (VAS). The mean VAS score was 1.44 (SD 1.48). At final follow-up, four patients had recurrent infections after arthrodesis (14.8%). Of these, three patients were treated with a one-stage arthrodesis nail exchange; one of the three patients had an aseptic loosening with a third single-stage exchange, and one patient underwent knee amputation for uncontrolled sepsis at 108 months. All patients, including the amputee, indicated that they would choose arthrodesis again. Data indicate that a single-stage knee arthrodesis offers an acceptable salvage procedure after failed and infected TKA.

Cite this article: Bone Joint J 2015;97-B:649–53.

The use of hinged implants in primary total knee replacement (TKR) should be restricted to selected indications and mainly for elderly patients. Potential indications for a rotating hinge or pure hinge implant in primary TKR include: collateral ligament insufficiency, severe varus or valgus deformity (> 20°) with necessary relevant soft-tissue release, relevant bone loss including insertions of collateral ligaments, gross flexion-extension gap imbalance, ankylosis, or hyperlaxity. Although data reported in the literature are inconsistent, clinical results depend on implant design, proper technical use, and adequate indications. We present our experience with a specific implant type that we have used for over 30 years and which has given our elderly patients good mid-term results. Because revision of implants with long cemented stems can be very challenging, an effort should be made in the future to use shorter stems in modular versions of hinged implants.

Cite this article: Bone Joint J 2014;96-B(11 Suppl A):93–5.

Fungal peri-prosthetic infections of the knee and hip are rare but likely to result in devastating complications. In this study we evaluated the results of their management using a single-stage exchange technique. Between 2001 and 2011, 14 patients (ten hips, four knees) were treated for a peri-prosthetic fungal infection. One patient was excluded because revision surgery was not possible owing to a large acetabular defect. One patient developed a further infection two months post-operatively and was excluded from the analysis. Two patients died of unrelated causes.

After a mean of seven years (3 to 11) a total of ten patients were available for follow-up. One patient, undergoing revision replacement of the hip, had a post-operative dislocation. Another patient, undergoing revision replacement of the knee, developed a wound infection and required revision 29 months post-operatively following a peri-prosthetic femoral fracture.

The mean Harris hip score increased to 74 points (63 to 84; p < 0.02) in those undergoing revision replacement of the hip, and the mean Hospital for Special Surgery knee score increased to 75 points (70 to 80; p < 0.01) in those undergoing revision replacement of the knee.

A single-stage revision following fungal peri-prosthetic infection is feasible, with an acceptable rate of a satisfactory outcome.

Cite this article: Bone Joint J 2014;96-B:492–6.

We reviewed the literature on the currently available choices of bearing surface in total hip replacement (THR). We present a detailed description of the properties of articulating surfaces review the understanding of the advantages and disadvantages of existing bearing couples. Recent technological developments in the field of polyethylene and ceramics have altered the risk of fracture and the rate of wear, although the use of metal-on-metal bearings has largely fallen out of favour, owing to concerns about reactions to metal debris. As expected, all bearing surface combinations have advantages and disadvantages. A patient-based approach is recommended, balancing the risks of different options against an individual’s functional demands.

Cite this article: Bone Joint J 2014;96-B:147–56.

Femoral revision after cemented total hip replacement (THR) might include technical difficulties, following essential cement removal, which might lead to further loss of bone and consequently inadequate fixation of the subsequent revision stem.

Femoral impaction allografting has been widely used in revision surgery for the acetabulum, and subsequently for the femur. In combination with a primary cemented stem, impaction grafting allows for femoral bone restoration through incorporation and remodelling of the impacted morsellized bone graft by the host skeleton. Cavitary bone defects affecting meta-physis and diaphysis leading to a wide femoral shaft, are ideal indications for this technique. Cancellous allograft bone chips of 1 mm to 2 mm size are used, and tapered into the canal with rods of increasing diameters. To impact the bone chips into the femoral canal a prosthesis dummy of the same dimensions of the definitive cemented stem is driven into the femur to ensure that the chips are very firmly impacted. Finally, a standard stem is cemented into the neo-medullary canal using bone cement.

To date several studies have shown favourable results with this technique, with some excellent long-term results reported in independent clinical centres worldwide.

Cite this article: Bone Joint J 2013;95-B, Supple A:92–4.

Based on the first implementation of mixing antibiotics into bone cement in the 1970s, the Endo-Klinik has used one stage exchange for prosthetic joint infection (PJI) in over 85% of cases. Looking carefully at current literature and guidelines for PJI treatment, there is no clear evidence that a two stage procedure has a higher success rate than a one-stage approach. A cemented one-stage exchange potentially offers certain advantages, mainly based on the need for only one operative procedure, reduced antibiotics and hospitalisation time. In order to fulfill a one-stage approach, there are obligatory pre-, peri- and post-operative details that need to be meticulously respected, and are described in detail. Essential pre-operative diagnostic testing is based on the joint aspiration with an exact identification of any bacteria. The presence of a positive bacterial culture and respective antibiogram are essential, to specify the antibiotics to be loaded to the bone cement, which allows a high local antibiotic elution directly at the surgical side. A specific antibiotic treatment plan is generated by a microbiologist. The surgical success relies on the complete removal of all pre-existing hardware, including cement and restrictors and an aggressive and complete debridement of any infected soft tissues and bone material. Post-operative systemic antibiotic administration is usually completed after only ten to 14 days.

Cite this article: Bone Joint J 2013;95-B, Supple A:77–83.

There have been only a few small studies of patients with an infected shoulder replacement treated with a single-stage exchange procedure. We retrospectively reviewed 35 patients (19 men and 16 women) with a peri-prosthetic infection of the shoulder who were treated in this way. A total of 26 were available for clinical examination; three had died, two were lost to follow-up and four patients had undergone revision surgery. The mean follow-up time was 4.7 years (1.1 to 13.25), with an infection-free survival of 94%.

The organisms most commonly isolated intra-operatively were Staphylococcus epidermidis and Propionibacterium acnes; two patients developed a recurrent infection. Three different types of prosthesis were used: a hemiarthroplasty, a hemiarthroplasty with a bipolar head and reverse prosthesis. The mean Constant-Murley score at final follow-up was 43.3 (14 to 90) for patients with a hemiarthroplasty, 56 (40 to 88) for those with a hemiarthroplasty with a bipolar head and 61 (7 to 90) for those with a reverse prosthesis. The mean hospital stay was 10.6 days (5 to 29).

Single-stage exchange is a successful and practical treatment for patients with peri-prosthetic infection of the shoulder.

Cite this article: Bone Joint J 2013;95-B:391–5.

Introduction

Modular tantalum augments have been introduced to manage severe bone defects in hip and knee revision surgery. The porous surfaces of tantalum augments are intended to enhance osseointegration and a number of studies have documented their excellent biocompatibility. However, the characteristics of tantalum augment osseointegration on human ex vivo specimens from re-revision procedures have not been reported so far.

Introduction

Patellar tracking in total knee replacements has been extensively studied, but little is known about patellar tracking in isolated patellofemoral replacements. We compared patellar tracking and the position of the patellar groove in the natural knee, followed by implantation of the femoral component of a PFR (patella unresurfaced) and after implantation of the femoral & patellar component of the PFR.

Introduction

Several options exist for the treatment of periprosthetic osteolysis in revision knee surgery. We describe our preliminary short-term experiences using trabecular metal (TM) technology in order to fill bony defects either on the femoral or on the tibial side.

Introduction

Mobile-bearing TKRs allow some axial rotation and may provide a more natural patellar movement. The aim was to compare patellar kinematics among the normal knee, fixed-bearing and mobile-bearing TKR.

Unicompartmental knee arthroplasty (UKA) is an increasingly attractive and clinically successful treatment for individuals with isolated medial compartment disease who demand high levels of function. A major challenge with UKA is to place the components accurately so they are mechanically harmonious with the retained joint surfaces, ligaments and capsule. Misalignment of UKA components compromises clinical outcomes and implant longevity. Cobb et al. (JBJS-Br 2006) showed that robot-assisted placement of UKA components was more accurate than traditional techniques, and subsequently that the clinical outcomes were improved. Cobb’s method, however, employed rigid intraoperative stabilization of the bones in a stereotactic frame, which is impractical for routine clinical use. Robotic systems have now advanced to include dynamic bone tracking technologies so that rigid fixation is no longer required. The question is -Do these robotic systems with dynamic bone tracking provide the same accuracy advantages demonstrated with robotic systems with rigidly fixed bones? We compared robot-assisted and traditionally instrumented UKA in six bilateral pairs of cadaver specimens. In all knees, a CT-based preoperative plan was performed to determine the ideal positions and orientations for the implant components. Traditional manual instruments were utilized with a tissue-sparing approach to implant one knee of each pair. A haptic robotic system acting as a virtual cutting guide was used to perform the robot-assisted UKA, again with a tissue-sparing approach. Postoperative CT scans were obtained from all knees, and the 3D placement errors were quantified using 3D-to-3D registration of implant and bone models to the reconstructed CT volumes.

The magnitudes of femoral implant orientation error were significantly smaller for the robot-assisted implants compared to traditionally implanted components (4° vs 11°, p< 0.001), but the magnitudes of femoral placement error did not reach significance (3mm vs. 5mm, p=0.056). The magnitudes of tibial implant placement error were not significantly different (4mm vs. 5mm and 7° vs. 7°, p> 0.05).

Well-placed UKA implants can provide durable and excellent functional results, which is an increasingly attractive option for young and active patients with severe compartmental osteoarthritis who wish not to have or to delay a total knee replacement.

Previous studies have demonstrated significant improvement in implant placement accuracy and clinical results with robot-assisted surgery using rigid bone fixation. This study demonstrates it is possible to achieve significant accuracy improvements with robot-assisted techniques allowing free bone movement. Additional larger trials will be required to determine if these differences are realized in clinical populations.

Measurement of precision in positioning multiple autologous osteochondral transplantation in comparison to the conventional free hand technique.

The articular surfaces of 6 cadaveric condyles (medial – lateral) were used. The knee was referenced by a navigation system (Praxim). The pins carrying the navigation detectors were positioned to the femur and to the tibia. The grafts were taken from the donor side (measurement I) with the special instrument which carried the navigation detectors. The recipient site was prepared and the donor osteochondral grafts were forwarded to the articular surface (II). The same procedure took place without navigation. The articular surface congruity was measured with the probe (measurement III)

The angle of the recipient plug removal (measurement I) with the navigation technique was 3,27° (SD 2,05°; 0°–9°). The conventional technique showed 10,73° (SD 4,96°; 2°–17°). For the recipient plug placement (measurement II) under navigated control a mean angle of 3,6° (SD 1,96°; 1°–9°) was shown, the conventional technique showed results with a mean angle of 10,6° (SD 4,41°; 3°–17°). The mean depth (measurements III) under navigated control was 0,25mm (SD 0,19mm; 0mm–0,6mm). With conventional technique the mean depth was 0,55mm (SD 0,28mm; 0,2mm –1,1mm).

The application of navigation showed that complications like diverging of the grafts leading to breakage or loosening as well as depth mismatch which can lead to grafts sitting over or under the articular surface can be avoided providing better results in comparison to the free hand procedure

Background: Navigation allows for determination of the mechanical axis of the lower extremity. We evaluated the intra- and inter-observer reliability with an image-free navigation system and determined the accuracy of the navigation system to monitor changes in lower limb alignment as compared to alignment measured with a novel 3D CT method.

Methods: A total of 13 cadaver legs were used to evaluate the intra- and inter-observer registration reliability by three observers. Navigated HTOs were then performed on all legs and pre/postoperative values of the varus-valgus angles were recorded. Data were compared to equivalent measures obtained by 3D CT using intra-class correlation coefficients (ICCs).

Results: The ICCs for intra-observer varus-valgus reliability ranged from 0.756 to 0.922, inter-observer reliability was 0.644. ICCs for navigation-CT comparison were 0.784 for varus-valgus angle (pre-op), 0.846 (postop) and 0.873 (delta). Maximum differences in navigation-CT measurements in varus-valgus angle (delta) were 4.5° for all trials. There was poor reliability and accuracy in the axial plane (tibial rotation) as well as fair reliability and accuracy in the sagittal plane (tibial slope).

Conclusion: Image-free navigation is reliable for dynamic monitoring of coronal leg alignment but shows relevant limitations in determination of sagittal and axial plane alignment.

Introduction: Mobile bearing TKRs may allow some axial rotation and also compensate for a slight tibiofemoral rotational mismatch. This is thought to provide better kinematics and a more natural patellar movement. This theoretical advantage has not been verified in clinical studies for the tibiofemoral kinematics. However, little is known about the patellofemoral kinematics of mobile bearing TKRs. The aim was to compare patellar kinematics among the anatomic knee, fixed bearing TKR and mobile bearing TKR.

Methods: Optical computer navigation marker arrays (Brainlab) were attached to the femur, tibia and patella of 9 whole lower extremities (5 fresh cadavers). The trial components of a fixed bearing posterior stabilised TKR (FB) (Sigma PFC, Depuy) were implanted using a tibia first technique. Then the tibia component was changed to a posterior stabilised mobile bearing tibia component (MB) (Sigma RP Stabilised). The patellae were not resurfaced. The knees were moved through a cycle of flexion and extension on a CPM machine. Medial/lateral shift and tilt was measured relative to the patella position in the natural knee at full extension always with soft tissue closure. The path of the trochlea and patellar groove of the femoral component was registered. Values are expressed as mean+/−one standard deviation. Statistical analysis: two tailed paired Student’s T-test.

Results: M/L shift: There was a tendency for the patella to track 2mm more laterally throughout the flexion range with a FB or MB TKR compared to the natural knee, but this did not reach significance.

Tilt: The patella in the natural knee tilted progressively laterally from extension to flexion, plateauing at 50° of flexion (20°: 1.9+/−2.7°, 40°: 5.6+/−5.4°, 60°: 6.2+/−6.4°, 80°:6.5+/−7.3°, 90°: 6.4+/−7.7°). With a FB or MB TKR the patellae also tilted laterally up to 50 degree of flexion, but then started to tilt back medially, reaching the neutral position again at 90°. The patellae of the FB and MB TKRs were significantly more medially tilted at 50° to 90° of flexion compared to the natural knee. But there was no difference between the FB and MB TKRs. (Fixed bearing: 20°: 2.5+/−7.2° p=0.30, 40°: 3.7°+/−6.5° p=0.15, 60°: 3.1+/−5.8° p=0.02, 80°:1.2+/−6.5° p=0.001, 90°: 0.3+/−7.2° p=0.001, Mobile bearing: 20°: 0.3+/−5.5° p=0.27, 40°: 3.6+/−5.2° p=0.08, 60°: 2.1°+/−5.8 p=0.01, 80°: 0.2+/−6.8 p=0.003, 90°: −0.6+/−7.3 p=0.002; vs. natural)

Trochlea position: The centre of the patellar groove of the femur component was more lateral than the trochlea by 2–5mm, it also extended 10mm further proximally.

Conclusion: There are kinematic differences in patellar tracking between the natural and a FB/MB TKR. This may be due to a slightly different position of the patellar groove. The patellar kinematics of the MB TKR is not more natural compared to the FB TKR.

Introduction: Dupuytren’s contracture is a common disease in Northern Europe. Partial fasciectomy is often used to treat the whole spectrum of Dupyutren’s disease, although high recurrence rates have been reported. In our department, the majority of patients are treated by total aponeurectomy, which is defined as the complete removal of palmar tissue. It has been found out that apparently normal-looking aponeurosis can also contain an increased proportion of collagen, which may lead to recurrent disease. Consequently, the perceived advantage of total aponeurectomy over partial aponeurectomy is the potential for a lower recurrence rate as all diseased tissue is potentially removed. Against this background, we have reviewed the effectiveness of total aponeurectomy performed on 61 patients.

Patients and Methods: The group of patients available for review consisted of 51 men and ten women with a mean age of 63.0 (range 42–79 years) and with a mean period of 3.45 years (range 1.03–6.39 years) between operation and review. No patient had follow-up of less than 1 year. At follow-up evaluation hands were examined for nodules, cords and retractions of the skin. The active mobility of the joints was determined with a goniometer and the Jamar hand dynamometer was used to measure grip strength in both hands. Sensitivity was examined by means of two-point-discrimination and the DASH-score was used for the analysis of rehabilitation. Patients were also asked about common risk factors for Dupuytren’s disease.

Results: Post-operative complications including haematoma, seroma or necrosis were found in 13.8% of the patients. Recurrence of contracture occurred in 10.8% of the patients and 4.6% of the operated patients presented with a nerve lesion. Nerve irritation was found in 6.2% of the patients. The mean DASH-score was 3.85 (range 0–52.5). Family pre-disposition was an important risk factor for Dupuytren’s disease with 44.3% of patients having a positive family history.

Conclusion: We suggest that total aponeurectomy is a promising alternative to partial fasciectomy with low risk for recurrent disease and slightly increased risk for a nerve lesion.