In gap balancing technique, we decided the femoral component rotation according to the ligament balance in flexion. Component and limb alignment are important considerations during TKA. Three-dimensional positioning of TKA implants and exact mechanical axis has an effect on implant loosening, polyethylene stresses, and gait. According to the recent report, the navigation system made it possible to achieve aligned implants more than conventional TKA. Hybrid Navigation technique which is our procedure is combination of navigation system and modified gap technique. In other words, exact mechanical axis is gained by navigation system, stable stability of knee joint is gained by modified gap technique. The purpose of this study is to carry out clinical evaluation and image evaluation of the patients who underwent hybrid navigation technique TKA.INTRODUCTION
PURPOSE
We used a polymerase chain reaction (PCR) lateral flow assay1) to rapidly diagnose joint infection. We evaluated the usefulness of multiplex-PCR (PCR lateral flow assay: PCR-LF) using detailed clinical data. A total of 35 synovial fluid samples were collected from 26 patients in whom bacterial infection was suspected, including 22 from knee joints, 11 from hip joints, and 2 from other joints. After purifying the DNA from the samples, multiplex PCR targeting two MRSA-associated genes (Aim
Method
The preparation of antibiotic-containing polymethyl methacrylate (PMMA), as spacers generates a high polymerization heat, which may affect their antibiotic activity; it is desirable to use bone cement with a low polymerization heat. Calcium phosphate cement (CPC) does not generate heat on polymerization, and comparative elution testings are reported that vancomycin (VCM)-containing CPC (VCM-CPC) exceeded the antibiotic elution volume and period of PMMA (VCM-PMMA). Although CPC alone is a weak of mechanical property spacer, the double-layered, PMMA-covered CPC spacer has been created and clinically used in our hospital. In this study, we prepared the double-layered spacers: CPC covered with PMMA and we evaluated its elution concentration, antimicrobial activity and antibacterial capability. We prepared spherical, double-layered, PMMA-coated (CPC+PMMA; 24 g CPC coated with 16 g PMMA and 2 g VCM) and PMMA alone (40 g PMMA with 2 g VCM) spacers (5 each). In order to facilitate VCM elution from the central CPC, we drilled multiple holes into the CPC from the spacer surface. Each spacer was immersed in phosphate buffer (1.5 mL/g of the spacer), and the solvent was changed daily. VCM concentrations were measured on days 1, 3, 7, 14, 28, 56, and 84. Antimicrobial activity against MRSA and MSSA was evaluated by the broth microdilution method. After measuring all the concentration, the spacers were compressed at 5 mm/min and the maximum compressive load up to destruction was measured.Aim
Method
The posterolateral overhang of the femoral component was measured using 3-D templating software. Rounded and reduced shape of the posterolateral corner in the femoral component would be beneficial. In total knee arthroplasty, patients sometimes have pain in the posterolateral part of the knee. One possible cause is the impingement of the popliteus tendon against femoral components. In the literature, the incidence has been reported to be 1–4%. The purpose of this study was to compare of two prostheses on the amount of posterolateral overhang of the femoral component using Three-dimensional (3-D) templating software.Summary
Introduction
Constrained condylar knees are used infrequently but are successful for the treatment of the primary or revision knee with ligamentous instability and bony defect. The purpose of the present study is retrospectively analyze clinical and radiological outcome of primary and revision total knee arthroplasty with condylar constrained knee (CCK) prosthesis at a minimum of 5 years. Fourteen knees underwent total knee arthroplasty with CCK prosthesis, performed between 2003 and 2009. The average age of the patients at the time of the surgery was 71.4 years (range, 47 to 88 years). The reason for the operation was primary (osteoarthritis) in 2, revision due to aseptic loosening in 9 and infection after total knee arthroplasty in 4 knees. NexGen LCCK was used in all cases. The mean follow-up period was 91months (range, 60 to 128 month).Background
Methods
Atypical femoral fracture focused on relation of bisphosphonate use, frequently. However, the mechanism of atypical femoral fracture was not yet clarified. Atypical femoral fractures have been kept femoral shaft cortical thickness and BMD, practically. We hypothesized that atypical femoral fractures were associated with impaired bone quality and curvature of femoral shaft. We experienced four atypical femoral fractures. One was subtrochanteric and three were shaft fracture. Two cases received bisphosphonate therapy for 3–5 years. BMD, bone metabolic markers, and bone quality markers were evaluated. Histomorphometry and collagen cross-link analysis were performed. Curvature of femoral shaft and 3-D finite element analysis in one incomplete fracture case were assessed.Introduction
Materials & Methods
In total knee arthroplasty, patients sometimes have pain in the posterolateral part of the knee. One possible cause is the impingement of the popliteus tendon against femoral components. In the literature, the incidence has been reported to be 1–4%. The purpose of this study is to quantify the amount of posterolateral overhang of the femoral component using 3-D templating software. We investigated 40 knees with varus osteoarthritic knees (Male 6 knees and Female 34 knees), all cases were grade 2 or lower in Kellgren Lawrence classification. Three-dimensional preoperative planning software was used to simulate the replacement of femoral component. The distal femur was simulated to cut 9 mm thickness on the lowest point of the medial condyles with 6 degrees valgus. The femoral mediolateral axis was simulated to be parallel to the surgical epicondylar axis. The size of femoral components was decided by anteroposteriol dimension of distal femur. Mediolateral location of the femoral component was that the lateral edge of the femoral components is just on the lateral cortex of the femur. In coronal plane, amount of M-L overhang of the femoral component was measured in 3 Zones (distal, proximal, center) on the surface of the posterior condyle cut (Figure 1).Introduction
Methods
Restoration of joint line in total knee arthroplasty (TKA) is important for kinematics of knee and ligamentous balance. Especially in revision TKA, it may be difficult to identify the joint line. The aim of this study is to define the relationship between epicondyles and articular surface using CT based three-dimensional digital templating sofware $“Athena” (Soft Cube, Osaka, Japan). 137 knees with osteoarthritis, all caces were grade 2 or lower in Kellgren-Lawrence index, were investigated. Perpendicular lines were dropped from the prominences of the medial and lateral femoral epicondyles to the most distal points of articular surfaces and distances of the lines were measured on the axial and coronal planes. The femoral width was measured as the distance between medial and lateral epicondyles. Each of the distance described above was converted to a ratio by dividing by the femoral width. On the axial plane, the average distance from epicondyles to the posterior articular surfaces were 29.4±2.2mm on the medial side and 21.2±2.3mm on the lateral side. The average of the femoral width was 75.2±4.1mm. On coronal plane, the average distance from epicondyles to the distal articular surfaces were 25.2±2.8mm on the medial side and 21.4±2.5mm on the lateral side. The ratio for the distance from epicondyles to the distal and posterior joint line compared to femoral width was 0.39±0.02, 0.28±0.03, 0.33±0.03 and 0.28±0.03. The distance from epicondyles to the distal and posterior joint line correlates with the femoral width of the distal femur. This information can be useful in determining appropriate joint line.
Patients with Bertolotti’s syndrome have characteristic lumbosacral anomalies and often have severe sciatica. We describe a patient with this syndrome in whom standard decompression of the affected nerve root failed, but endoscopic lumbosacral extraforaminal decompression relieved the symptoms. We suggest that the intractable sciatica in this syndrome could arise from impingement of the nerve root extraforaminally by compression caused by the enlarged transverse process.
Venous thromboembolism (VTE) is a frequent, life-threatening postoperative complication of orthopaedic surgery. Preoperative autologous blood donation has been advocated to reduce the risk of transfusion reactions and to limit potential infectious risk associated with donor blood. Experimental data suggest that autologous leukocytes might lead to immunomodulation similar to the effect attributed to allogenic leukocytes, but autologous whole blood (WB) is often still being used in Japan. We investigated the incidence rate of VTE and plasma D-dimer levels of the autologous WB transfusion and compared the findings with autologous red cell concentrates (RCC) and fresh frozen plasma (FFP) with regard to the cases of lower extremity arthroplasty. The subjects of this study were 138 patients with lower extremity arthroplasty who were scheduled to receive surgery. The operations included 72 total hip arthroplasties (THA) and 66 total knee arthroplasties (TKA). Postoperatively, plasma D-dimer levels were measured latex agglutination turbidimetric immunoassay. Ultrasonography and contrast-enhanced helical computed tomography was used for diagnosing VTE. There was no statistically significant difference in the post-surgery incidence rate of VTE between the autologous WB group (THA:20.0%, TKA: 27.9%) and autologous RCC/FFP group (THA: 11.9%, TKA: 30.4%). On the first post-surgery day, the plasma D-dimer levels were significantly higher in autologous WB group (THA: 8.1±9.5 μg/ml, TKA: 12.1±15.9 μg/ml) compared to the autologous RCC/FFP group (THA: 4.2±2.9 μg/ml, TKA:8.0±6.6 μg/ml). However, the plasma D-dimer levels were almost the same in both groups on the 14th day from the surgery. The results of this study suggest that donation and transfusion of autologous WB do not negatively influence the post operative VTE compared with autologous RCC/FFP. However, we must cautiously assess the plasma D-dimer levels of the autologous WB group on the first post-surgery day because of the high propensity of showing false positive rate compared to the RCC/FFP group.
We carried out three total knee replacements with proximal realignment in two patients with severe osteoarthritis of the knee and congenital dislocation of the patella. During the operation, the femur and the tibia were cut according to the recommendations of the manufacturer of the implant. The femoral component was placed in external rotation and the centre of the tibial component aligned in relation to the tibial tuberosity with regard to rotation and translation. After making the bone cuts, the iliotibial tract was detached from Gerdy’s tubercle, the popliteus tendon divided, and the biceps femoris tendon elongated by Z-plasty. After the trial implants were positioned, a proximal re-alignment procedure was performed. One knee had deep infection. There was one dislocated patella which was repositioned, and walking ability was improved in all knees. We believe that the rotational alignment of a prosthesis is as important as the soft-tissue surgery.
