Aims

The aim of this study was to describe a quantitative 3D CT method to measure rotator cuff muscle volume, atrophy, and balance in healthy controls and in three pathological shoulder cohorts.

Aims

The Walch Type C dysplastic glenoid is characterized by excessive retroversion. This anatomical study describes its morphology.

We assessed the clinical results, radiographic outcomes and complications of patients undergoing total shoulder replacement (TSR) for osteoarthritis with concurrent repair of a full-thickness rotator cuff tear. Between 1996 and 2010, 45 of 932 patients (4.8%) undergoing TSR for osteoarthritis underwent rotator cuff repair. The final study group comprised 33 patients with a mean follow-up of 4.7 years (3 months to 13 years). Tears were classified into small (10), medium (14), large (9) or massive (0). On a scale of 1 to 5, pain decreased from a mean of 4.7 to 1.7 (p = < 0.0001), the mean forward elevation improved from 99° to 139° (p = < 0.0001), and the mean external rotation improved from 20° (0° to 75°) to 49° (20° to 80°) (p = < 0.0001). The improvement in elevation was greater in those with a small tear (p = 0.03). Radiographic evidence of instability developed in six patients with medium or large tears, indicating lack of rotator cuff healing. In all, six glenoid components, including one with instability, were radiologically at risk of loosening. Complications were noted in five patients, all with medium or large tears; four of these had symptomatic instability and one sustained a late peri-prosthetic fracture. Four patients (12%) required further surgery, three with instability and one with a peri-prosthetic humeral fracture.

Consideration should be given to performing rotator cuff repair for stable shoulders during anatomical TSR, but reverse replacement should be considered for older, less active patients with larger tears.

Cite this article: Bone Joint J 2014;96-B:224–8.

We measured the tension in the interosseous membrane in six cadaveric forearms using an in vitro forearm testing system with the native radial head, after excision of the radial head and after metallic radial head replacement. The tension almost doubled after excision of the radial head during simulated rotation of the forearm (p = 0.007). There was no significant difference in tension in the interosseous membrane between the native and radial head replacement states (p = 0.09). Maximal tension occurred in neutral rotation with both the native and the replaced radial head, but in pronation if the radial head was excised. Under an increasing axial load and with the forearm in a fixed position, the rate of increase in tension in the interosseous membrane was greater when the radial head was excised than for the native radial head or replacement states (p = 0.02). As there was no difference in tension between the native and radial head replacement states, a radial head replacement should provide a normal healing environment for the interosseous membrane after injury or following its reconstruction. Load sharing between the radius and ulna becomes normal after radial head Replacement. As excision of the radial head significantly increased the tension in the interosseous membrane it may potentially lead to its attritional failure over time.

Cite this article: Bone Joint J 2013;95-B:1383–7.

Purpose

Glenoid component loosening is a common reason for failed total shoulder arthroplasty. Multiple factors have been suggested as causes for component loosening that may be related to cement technique. The purpose of the study was to compare the load transfer across a polyethylene glenoid bone construct with two different cementing techniques.

Purpose

Controversy exists regarding the optimal technique of subscapularis mobilization during shoulder arthroplasty. The purpose of this multicentre randomized double-blind study was to compare the functional outcomes and healing rates of the lesser tuberosity osteotomy (LTO) to the subscapularis tenotomy (ST).

Purpose

The coronoid and collateral ligaments are key elbow stabilizers. When repair of comminuted coronoid fractures is not possible, prosthetic replacement may restore elbow stability. A coronoid prosthesis has been designed with an extended tip in an effort to augment elbow stability in the setting of residual collateral ligament insufficiency. The purpose of this biomechanical study, therefore, was to compare an anatomic coronoid replacement with an extended tip implant both with and without ligament insufficiency.

Purpose

The management of moderate to large engaging Hill-Sachs lesions is controversial and surgical options include remplissage, allograft reconstruction, and partial resurfacing arthroplasty. Few in-vitro studies have quantified their biomechanical characteristics and none have made direct comparisons. The purpose of this study was to compare joint stability and range of motion (ROM) among these procedures using an in-vitro shoulder simulator. It was hypothesized that all procedures would prevent defect engagement, but allograft and partial resurfacing would most accurately restore intact biomechanics; while remplissage would provide the greatest stabilization, possibly at the expense of motion.

Purpose

Limited information is available regarding the functional outcomes of radial head fractures managed with open reduction and internal fixation (ORIF). The purpose of this study was to determine the functional outcomes of radial head fractures treated with ORIF.

Purpose

The remplissage procedure may be performed as an adjunct to Bankart repair to address an engaging Hill-Sachs defect. Clinically, it has been reported that the remplissage procedure improves joint stability but that it may also restrict shoulder range of motion. The purpose of this biomechanical study was to examine the effects of the remplissage procedure on shoulder motion and stability. We hypothesized that the remplissage procedure would improve stability and prevent engagement but may have a deleterious effect on motion.

Purpose

The remplissage technique of insetting the infraspinatus tendon and posterior joint capsule into an engaging Hill-Sachs lesion has gained in popularity. However, a standardized technique for suture anchor and suture placement has not been defined for this novel procedure. The purpose of this biomechanical study was to compare three remplissage techniques by evaluating their effects on joint stiffness and motion.

Purpose

Radial head implant over-lengthening, a common cause of capitellar wear and clinical failure, is difficult to diagnose using radiographs of the injured elbow. The purpose of this study was to determine if a novel measurement technique based on contralateral elbow radiographs, termed the RACER method, could be used to accurately estimate the magnitude of radial head implant over-lengthening. Part I of this study examined the side-to-side consistency of radiographic landmarks used in the measurement technique. Part II of this study validated the technique using simulated radial head implant over-lengthening in a cadaveric model.

Purpose

There have been a number of described techniques for sizing the diameter of radial head implants. All of these techniques, however, are dependent on measurements of the excised native radial head. When accurate sizing is not possible due to extensive comminution or due to a previous radial head excision, it has been postulated that the proximal radioulnar joint (PRUJ) may be used as an intraoperative landmark for correct sizing. The purpose of this study was to: 1) determine if the PRUJ could be used as a reliable landmark for radial head implant diameter sizing when the native radial head in unavailable, and (2) determine the reliability of measurements of the excised radial head.

Purpose

Coracoid transfer is an effective reconstructive procedure for complex glenohumeral joint instability. Recently, the congruent-arc Latarjet procedure has been described which orients the coracoid graft undersurface flush to the glenoid articular margin. The purported advantage of this modification is that the radii of curvature of the coracoid undersurface and the anterior glenoid rim are believed to be similar, and therefore, congruent. The purpose of this study was to determine the dimensions of the coracoid and to compare the radius of curvature (ROC) of the coracoid undersurface to the ROC of the intact glenoid and various glenoid bone-loss scenarios.

Purpose

Current coronoid fracture classification systems are based on fragment size and configuration using plain radiographs and/or CT. During surgery, coronoid fracture fragments appear much larger than anticipated because cartilage is radiolucent and therefore not taken into account with preoperative imaging. The purpose of this study was to quantify the articular cartilage thickness of the coronoid process, with reference to coronoid fracture classifications.

Purpose

The coronoid process is an integral component for elbow stability. In the setting of a comminuted coronoid fracture, where repair is not possible, a prosthetic device may be beneficial in restoring elbow stability. The hypothesis of this in-vitro biomechanical study was that an anatomic coronoid prosthesis would restore stability to the coronoid deficient elbow.

Purpose: The literature contains little information on an objective method of measuring radiocapitellar joint translations, as would be seen with joint instability. The purpose of this study was to develop and validate a measurement method that was simple and that could be easily reproducible in a clinical setting or intra-operatively to assess radiocapitellar joint translations.

Method: We performed a radiological study on a synthetic elbow specimen in order to quantify radial head translations as related to the capitellum: the Radio-capitellum ratio (RCR). Thirty (30) lateral elbow x-rays were taken in different magnitude of subluxation of the radial head. The subluxation was created randomly by manipulation. X-rays where taken by fluoroscopy to obtain a perfect lateral view of the distal humerus. First, the evaluators determined the long axis of the radius and the center of the capitellum. The displacement of the radial head (in mm) was obtained by measuring the distance of the line perpendicular to the long axis of the radius passing through the center of the capitellum. Then, in order to adjust for variation of magnification, a ratio of the displacement of the radial head about the diameter of the capitellum was done. The RC ratio would be of zero because the long axis of the radius always crosses the center of the capitellum in a perfectly aligned joint. A five mm translation of the radial head and a capitellum diameter of twenty (20) mm would give a RCR of 25% and would be positive if anterior and negative if posterior. The measurements were done two times at one week intervals by three independent evaluators to test inter-observer agreement and intra-observer consistency. The radiological incidences were randomly ordered to minimize observer recall bias. Intra/inter-observer reliability was calculated using Intra-Class Correlation (ICC) and paired T-tests.

Results: The mean translation in the trial group was of 6,06% (SD 70.7%) from – 167% to 125%. A result over 100% means that it is a complete dislocation ie – the axis of the radius is outside of the capitellum. Negative values signify posterior translation and positive values an anterior translation. Intra-observer reliability was excellent for the Radio-capitellum ratio (ICC 0.988 and 0.995) and inter-observer reliability was excellent (ICC 0.984 in average). Paired T-test results confirm a high intra-observer repeatability (p=0.97 and p=0.99) as well as a large inter-observer reproducibility (p=0.98 in average).

Conclusion: The proposed measurement of radial head translation about the capitellum (in percent): radio-capitellum ratio (RCR) has excellent inter – and intra-observer reliability when using our measurement method.

Purpose: Glenoid component loosening is a common reason for failed total shoulder arthroplasty. Multiple factors have been suggested as causes for component loosening including asymmetric loading of the glenoid prosthesis by the humeral head (rocking horse phenomenon). A novel technique was employed to measure in-vitro strain in the subchondral bone adjacent to a cemented all polyethylene pegged glenoid prosthesis. The purpose of the study was to develop and validate a testing protocol to investigate load transfer in the polyethylene glenoid implant and bone construct.

Method: Eight polyethylene components were implanted using standard cementing techniques in eight cadaveric specimens. Loading was performed with a pneumatic actuator capable of applying loads at various angles. A dynamic 10 N/s force was applied for a total of 15 seconds producing a maximum force of 150N at angles of 0, 10, 20, 30, 40 and 50o. Strain gauges were placed around the implant 1mm proximal to the bone-cement interface at the four quadrants. The humeral head was simulated with a custom steel ball with a non-conforming diameter in relation to the prosthesis that is typical in total shoulder arthroplasty.

Results: During pure compressive loading, tension was observed in the superior and inferior quadrants of the glenoid. Superior and inferior loading caused increasing same side (ipsilateral) tension, occurring from 0 to 30o and 0 to 20o, respectively. Compression was recorded superiorly when loading was applied at 40o and 50o in the superior direction while contralateral tension was recorded in the inferior gauges. Strain measurements were less consistent in the anterior and posterior glenoid quadrants and varied between tension and compression.

Conclusion: Tension measurements in the ipsilateral direction at lower angles were unexpected. This observation differs from the previous assumption that applied loads at relatively perpendicular angles to the implant should dissipate as compression. Tension at the bone cement interface is unfavorable. The identification of tension in some quadrants of the implant in this study, therefore, may have revealed a mechanism of implant loosening. Our data support the previously described rocking horse phenomena and also illustrate a new umbrella type effect of polyethylene flexure, which causes the periphery of the glenoid implant to flex upwards superiorly and inferiorly. These findings have the potential to influence future designs of total shoulder arthroplasty perhaps leading to increased implant survival.

Purpose: The success of humeral head replacement following fracture is reliant on several factors, one of which is version. The correct humeral version (HV) is highly variable, and is patient and side dependent. In the setting of fracture, there is no intra-operative landmark to guide the surgeon as to the anatomic version. This study has examined computed tomography (CT) of the shoulder and compared the HV to the metaphyseal version (MV) to evaluate reliability in predicting the anatomic version.

Method: A retrospective review of 50 shoulder CT scans was carried out. Patients were excluded if the anatomy prevented HV or MV evaluation. The HV and MV was measured by 2 independent evaluators. Inter and intra-rater reliability was performed.

Results: There were 27 right and 23 left shoulder CT’s reviewed. The mean age of patients was 45.3 (range 13–85). The difference between the MV and HV was approximately 2.8 (95% CI 0.63–5.1). Inter and intra-rater reliability was 0.966 and 0.984, respectively.

Conclusion: Determining the version of the humeral head in the setting of fracture is difficult and highly inaccurate. The biceps groove has been previously cited as a landmark for arthroplasty position, however, given the anatomic variability, version may be miscalculated. We have demonstrated the medial calcar of the proximal humerus is within 3 degrees of the actual humeral head version. This CT guided approach is novel, reproducible and demonstrates excellent reliability. It is both accurate and consistent and may be successfully utilized in the setting where normal anatomic landmarks are absent, such as fracture.

Purpose: Unrepairable fractures of the radial head are often treated with radial head arthroplasty. Insertion of a radial head prosthesis that is too thick, or overstuffed, is believed to be a common complication that may result in pain, arthrosis, capitellar wear and decreased elbow range of motion. The purpose of this study was to develop guidelines for determining the appropriate thickness of radial head implants. We hypothesized that

radiographic incongruity of the medial facet of the ulnohumeral joint and that

Method: Six human cadaveric upper extremities were used to evaluate the clinical and radiographic effects of overstuffing of a radial head arthroplasty. Each specimen received an anatomic radial head replacement and then underwent overstuffing with +2 mm, +4 mm, +6 mm and +8 mm lengths. Gross lateral ulnohumeral joint spaces were measured, and anteroposterior radiographs were taken of the elbow from which radiographic medial and lateral ulnohumeral joint spaces were measured.

Results: Intraoperative gapping of the lateral ulnohumeral facet was shown to be highly reliable for detecting radial head overstuffing, increasing from a mean of 0.0 mm at standard length to 1.0 mm with 2 mm overstuffing (p < 0.05). Radiographically, the congruity of the lateral ulnohumeral facet was significantly different with 2 mm of overstuffing as compared to the anatomic length (p < 0.05). The congruity of the medial ulnohumeral facet only became significantly different with +6 mm of overstuffing as compared to the anatomic length (p < 0.05).

Conclusion: Radiographic incongruity of the medial facet of the ulnohumeral joint was an unreliable indicator of radial head overstuffing. Radiographic gapping of the lateral ulnohumeral facet demonstrated sufficient sensitivity to diagnose radial head overstuffing when compare to the standard length implant radiographs. Visual gapping of the lateral ulnohumeral facet on the cadaver specimens reliably indicated radial head overstuffing and should be a useful anatomic feature to assess intraoperatively.