header advert
Results 1 - 3 of 3
Results per page:
The Bone & Joint Journal
Vol. 97-B, Issue 3 | Pages 427 - 431
1 Mar 2015
Wu C Hsieh P Fan Jiang J Shih H Chen C Hu C

Fresh-frozen allograft bone is frequently used in orthopaedic surgery. We investigated the incidence of allograft-related infection and analysed the outcomes of recipients of bacterial culture-positive allografts from our single-institute bone bank during bone transplantation. The fresh-frozen allografts were harvested in a strict sterile environment during total joint arthroplasty surgery and immediately stored in a freezer at -78º to -68º C after packing. Between January 2007 and December 2012, 2024 patients received 2083 allografts with a minimum of 12 months of follow-up. The overall allograft-associated infection rate was 1.2% (24/2024). Swab cultures of 2083 allografts taken before implantation revealed 21 (1.0%) positive findings. The 21 recipients were given various antibiotics at the individual orthopaedic surgeon’s discretion. At the latest follow-up, none of these 21 recipients displayed clinical signs of infection following treatment. Based on these findings, we conclude that an incidental positive culture finding for allografts does not correlate with subsequent surgical site infection. Additional prolonged post-operative antibiotic therapy may not be necessary for recipients of fresh-frozen bone allograft with positive culture findings.

Cite this article: Bone Joint J 2015;97-B:427–31.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_34 | Pages 68 - 68
1 Dec 2013
Gray C Wu C Baldwin K Lee G
Full Access

Introduction

Infection following total knee arthroplasty (TKA) is a catastrophic complication. In the United States, for chronic, first time infected TKA, the gold standard remains a 2-stage reimplantation (2SR) procedure, with reported success rates approaching 90%. However, there is a lack of consensus on the treatment of subsequent reinfections.

Question

The purpose of this study was to use published data on infected TKA to develop a decision tree analysis to determine the treatment method likely to yield the highest quality of life for a patient following a failed 2SR.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXIII | Pages 128 - 128
1 May 2012
Uzun H James B Dunstan C Wu C Ramaswamy Y Paschalidis A Zreiqat H Little D McDonald M
Full Access

Developing biomaterials for bone regeneration that are highly bioactive, resorbable and mechanically strong remains a challenge. Zreiqat's lab recently developed novel scaffolds through the controlled substitution of strontium (Sr) and zinc (Zn) into calcium silicate, to form Sr-Hardystonite and Hardystonite, respectively and investigated their in vivo biocompatibility and osteoconductivity

We synthesized 3D scaffolds of Sr-Hardystonite, Hardystonite and compared them to the clinically used tricalcium phosphate (micro-TCP) (6 × 6 × 6 mm) using a polyurethane foam template to produce a porous scaffold. The scaffolds were surgically implanted in the proximal tibial metaphysis of each tibia of Female Wistar rats. Animals were sacrificed at three weeks and six weeks post-implantation and bone formation and scaffold resorption were assessed by microcomputed tomography (micro-CT) histomorphometry and histology. Histological staining on undecalcified sections included Toluidine blue, tartrate-resistant acid phosphatase (TRAP) and alkaline phosphatase (ALP).

The bone formation rate and mineral apposition rate will be determined by analysing the extent and separation of fluorescent markers by fluorescent microscopy micro-CT results revealed higher resorbability of the developed scaffolds (Sr-Hardystonite and Hardystonite) which was more pronounced with the Sr-Hardystonite. Toluidine blue staining revealed that the developed ceramics were well tolerated with no signs of rejection, necrosis, or infection. At three weeks post implantation, apparent bone formation was evident both at the periphery and within the pores of the all the scaffolds tested. Bone filled in the pores of the Sr- Hardystonite and Hardystonite scaffolds and was in close contact with the ceramic. In contrast, the control scaffolds showed more limited bone ingrowth and a cellular layer separating the ceramic scaffolds from the bone. By six weeks the Hardystonite and Sr Hardystonite scaffolds were integrated with the bone with most pores filled with new bone. The control scaffold showed new bone formation in the plane of the cortical bone but little new bone where the scaffold entered the marrow space. Sr Hardystonite showed the greatest resorbability with replacement of the ceramic material by bone.

We have developed novel engineered scaffolds (Sr-Hardystonite) for bone tissue regeneration. The developed scaffolds resorbed faster than the clinically used micro- TCP with greater amount of bone formation replacing the resorbed scaffold.