Aim

A significant number of patients undergoing shoulder arthroplasty surgery have C acnes contamination at the end of the primary surgery. The objective of this study is to determine whether patients with C acnes contamination at the end of their primary shoulder surgery have a worse prognosis than those who end up without C. acnes contamination.

Aim

Cutibacterium acnes (C. acnes) is the most cultured organism implicated in periprosthetic shoulder infections. Nevertheless, the clinical significance of its persistence on the skin surface and in the deep layers during shoulder arthroplasty surgery remains still unknown. The purpose of this study was to know if the C. acnes isolate present in deep tissues at the end of a primary shoulder arthroplasty could be responsible for shoulder arthroplasty infection.

Aim

Recent studies have indicated that the presence of P. acnes in the skin of the shoulder and around the acromion is higher than other body regions like the knee or the hip. The aim of this study was to estimate the presence of P. acnes in a real set of primary shoulder arthroplasty, after skin preparation with chlorhexidine and administration of empirical antibiotic therapy.

Introduction: Optimal management of proximal humeral fractures is still to be defined. The objective of this study is to present the functional and quality of life results of proximal humeral fractures conservatively treated in elderly population

Material and Methods: Prospective study including 74 fractures in patients over 60 and less than 85 years-old. 4 patients lost at final follow-up. Fractures were assessed by X-ray and C.T. exam. There were 14 one-part fractures, 15 two-part greater tuberosity (GT), 17 two-part surgical neck, 10 three-part GT, 6 four-part, 6 two-part GT fracture dislocation, 1 four-part fracture dislocation and 1 impression fracture. Constant Score, EuroQol 5-D and X-Ray study at two-year follow-up. U Mann-Whitney for non parametric and t-student for parametric.

Results: Constant Score: non-displaced fractures mean of 73,58 while displaced fractures 59,41 (p0,003). Significant differences between them in all Constant items except for External rotation (p0,17). Total Constant Score diminished as fracture pattern increased complexity: 2-part GT 72,78, 2-part surgical neck 65,88, 2-part GT fracture dislocation 71, 3-part GT 54,64 and 4-part 33,66. Despite these differences there were no significant differences as far as pain was concerned among all displaced fractures.

Quality of life perception: no significant differences in VAS between displaced and non-displaced fractures (p 0,75). 4 avascular necrosis at final follow-up, 2 in the 4-part group, 1 in 3-part GT and 1 in 4-part fracture dislocation.

Conclusion: Conservative treatment of proximal humeral fractures give reasonable good functional results in 1-part, 2-part GT, 2-part surgical neck and 2-part GT fracture dislocation in specially selected elderly population. 3-part GT and 4-part fractures achieve a limited functional result with conservative treatment. No differences have been observed between non-displaced and displaced fractures conservatively treated as far as quality of life perception is concerned in such elderly population.

Objective: The purpose of this study was to determine how changes in functional shoulder score (Constant Score) affected the values of the SF-36 score, to determine the amount of functional score change to be considered relevant.

Material and Method: 427 patients were included. All of them were assessed with a functional shoulder score (Constant Score) and fulfilled SF-36 score. Mean age was of 50,61(18–85), 200 of them were male and 227 female. 280 were considered to be active while 147 were retired as far as working status is concerned. There were 191 patients with university studies and 236 with primary studies. Primary diagnosis was cuff disorders in 265 patients, old-fracture in 43, degenerative in 72 and instability in 34. Correlations were performed with Spearman’s rho and regression models were evaluated

Results: There was a moderate but significant correlation between the total Constant Score and PF_NORM (0,511) and US standardized physical component (US STPH) (0,491) of the SF-36. For every point of increase in the Constant score the SF-36 increases 0,235 points. Looking into the different items of the Constant Score, Activities of daily living (ADL) and strength presented the stronger correlation with SF-36 (0,428, 0,411). In the regression model, every point of increase of pain, ADL, forward elevation, external rotation and internal rotation means an increase of 0,472, 0,39, 0,84, 0,82 and 0,86 of the US STPH of the SF-36.

Conclusions: Whenever the outcome of any shoulder treatment is analyzed it has to be taken into account that for every point of increase of the Total Constant Score just 0,235 points of the US SPTH of the SF-36 increase. Depending on the mean value of the US SPTH of the SF-36 of the population studied, the relevant increase of Constant Score can be calculated.

Mobility improvements seem to have more influence that pain changes as far as increasing the US SPTH of the SF-36 is concerned.

Purpose: Some of nowadays treatments in shoulder pathology are focused in pain drop, but is to be evidenced than pain is the most reliable item in shoulder patient’s quality of life. The purpose of this study is to analyze quality of life in patients affected of different shoulder pathologies and check how pain and movement influence quality of life perception (QLP).

Material And Methods: 134 patients correctly filled the shoulder functional Constant score and the SF-36 score. Patients were classified by age, sex, labor status, level of education and diagnosis. There were 56 men (41,79%) and 78 women (58,21%). Mean age was 53,77 (18–85). Amongst them, 74 patients were classified as subacromial syndrome, 19 as fractures, 29 degenerative pathology and 12 as shoulder instability. Student’s T test was performed to study quantitative variables. Qualitive variables were studied using ANOVA test. Impact of pain and mobility on patients’ quality of life was assessed by Rho-Spearman’s test. Statistical regression coefficient was used to evaluate the impact of pain and mobility in perceived quality of life.

Results: There were statistically significant differences amongst age, sex and diagnosis groups (p< 0,001). Patients older than 65 years old significatively (p< 0.001) perceived worst quality of life. Women and patients affected by a degenerative disorder significatively perceived worst quality of life (p< 0.001). A relationship between movement and quality of life was founded (linear trend). In patients with preserved range of motion, changes in pain perception significatively affected PQL (p< 0,001), meanwhile patients with poor range of motion, changes in pain perception did not affect PQL (p> 0,001). The regression coefficient for pain related to SF-36 Physical component scale was 0,629 (IC: 0,301–0.958), meanwhile the regression coefficient for external rotation is 1,196 (IC: 0,693–1,699), giving thus a predominant effect of extenal rotation in PQL.

Conclusion/Discussion: Age, sex and etiology of shoulder disorder determine different perceptions of quality of life independently of the shoulder functional scoring.

Range of motion significatively affect QLP independently of the level of pain. Pain affects QLP in patients whom range of motion is preserved. External rotation is the most important item affecting QLP.

Factors determining quality of life perception should be taken into account when planning surgery strategies for different shoulder disorders.

Introduction: Self-administered questionnaires are commonly used to evaluate functional and satisfaction results of different treatments applied. The objective of the study is to analyze the effect of the doctor-patient interview in the self-evaluation of the patient of the pain, level of function and satisfaction in different shoulder procedures.

Material and Method: 95 consecutive patients were recruited. There were 70 females and 25 males. Mean age of 64,18 yo (20–88). There were 28 fracture cases, 37 cuff disorders, 6 instabilities and 21 gleno-humeral arthritis. 46 patients had received surgery while 49 did not. 24 patients were excluded because of wrong complementation of the questionnaire. All the patients were asked to fill 3 analogical scales (level of shoulder pain, level of shoulder function and satisfaction with the procedure) before and after the clinical visit. Non parametric values studied through U-Mann-Whitney.

Results: Analyzing the whole series there were significant differences between the pain experienced in the shoulder before and after the visit (p=0,039). There were marginally significant differences between the level of function of the shoulder experienced before and after visit (p=0,061), and there were no differences in satisfaction with the procedure (p=0,462). If the cohort of patients that had received surgery is analyzed apart, there are significant differences in pain perception (p=0,05) and also in function perception (p=0,046) but no differences were noted with satisfaction even though patients tend to perceive more satisfaction after visit. Females significantly considered less pain after visit than males (p=0,034) and no differences were noted because of age, diagnosis or time elapsed since surgery.

Conclusions: Globally, patients with shoulder disorders significantly consider to have less pain perception after clinical visit. Patients that had received surgery because of the shoulder disorder significantly perceive less pain and better shoulder function after visit. Satisfaction with the procedure tends to improve after visit but that is not significant.

Even a simple analogical scale has a 25% drop-outs because of wrong complementation.

When planning patient self-evaluation of pain and function the effect of the clinical visit has to be considered in order to avoid masking results.

Introduction: Functional results of hemiarthroplasties in proximal humeral fractures are unpredictable. The correct consolidation of the tuberosities back to the prosthesis seem to be of capital importance in the functional outcome. The objective of the study is to analyze the changes of the tension registered in the sutures passed through the tuberosities when changing the height and version of the prosthesis in a static model and in a dynamic model.

Material and Method: Prosthesis positioning: in both static and dynamic model, the prosthesis was placed in anatomical position, anatomical increasing 20° retroversion, increasing height in 1cm and anatomical version, decreasing height in 1 cm and anatomical version, increasing height in 1cm and increasing 20° retroversion, decreasing height in 1 cm and increasing 20° retroversion,

Static study: a 4-part fracture was reproduced in four fresh-frozen shoulder specimens. Sutures were placed between lesser tuberosity and diafisis (sensor 1) between both tuberosities (sensor 2) and between greater tuberosity and diafisis (sensor 3). Traction was performed through supraspinatus, infraspinatus and subescapularis attachments until the breakage of the suture or 1 cm gap between bony fragments. Tensions registered in a computer model.

Dynamic study: a 4-part fracture was reproduced in a humeral saw bone. Sutures placed in the same position that in the static model. Saw bone fixed at a robotic arm reproducing cycles of 90° anterior elevation, 30° lateral rotation, 30° internal rotation and retropulsion to starting point. Registering of the tensions. Quantitative values studied through t-student and non parametric values studied through U-Mann-Whitney and Kruskal-Wallis test.

Results: In the Static study, the suture placed between the tuberosities is the one that significantly receives more tension. The breakage of the suture happens more frequently when the prosthesis is placed in a lower position and in a lower more retroverted position.

In the dynamic study, the suture placed between the greater tuberosity and the diafisis is the one significantly receives more tension. The breakage of the suture happens more frequently when the prosthesis is placed in a lower position and in a lower more retroverted position.

Conclusions: When planning sutures between tuberosities in proximal humeral fractures treated with hemiarthroplasty postoperative rehabilitation program has to be considered because different sutures are at risk depending on static or dynamic model.

The worst positions of the hemiarthroplasty as far as over tensioning sutures is concerned are the low position and the low more retroverted position.

Introduction: Shoulder hemiarthroplasty is an established treatment for complex proximal humeral fractures but the functional results of these hemiarthroplasties in proximal humeral fractures are often poor and unpredictable. The capacity of restoring proximal humeral anatomy in such these complex fractures is of capital importance to obtain proper placement and secure fixation of the tuberosities to the prosthesis. The purpose of this study was to determine the value of the upper edge of the pectoralis major insertion as a landmark to determine proper height and version of hemiarthroplasties implanted for proximal humeral fractures.

Material and Methods: The upper edge of the pectoralis major insertion was referenced with a metallic device in 20 cadaveric humerus. A Computed Tomography study was performed in all the specimens. Total humeral length was recorded in all the specimens. The distance between the upper pectoralis major insertion and the tangent to the humeral head was also recorded. The anatomical neck of the humeral head was determined in the axial plane of the CT scan and a perpendicular line was drawn to represent the posterior fin of the prosthesis. To that image, the CT scan slice showing the upper insertion of the pectoralis major was superimposed and the distance of the metallic reference to the posterior fin of the prosthesis was recorded as it was the angle formed by the line connecting the upper pectoralis major insertion with the center of the anatomical neck diameter and with the posterior fin of the prosthesis.

Qualitative variables are presented in absolute and percentage values. Quantitative variables are presented with mean values and standard deviation.

Results: Mean total humeral length was 32,13 cm. The mean distance from the upper pectoralis major insertion to the tangent to the humeral head was of 5,64. The mean distance from the upper pectoralis major insertion to the tangent to the humeral head represents the 17,55% of the total humeral length. The mean distance of the upper pectoralis major insertion to the posterior fin of the prosthesis was of 1,06 cm. The angle between the upper pectoralis major insertion and the posterior fin of the prosthesis was of 24,65º.

Conclusions: Mean distance from the upper part of the pectoralis major insertion to the top of the humeral head of 5, 6 cm with a 95% confidence interval.

Placement of the prosthesis in the proper retroversion can be achieved by placing the posterior fin 1,06 cm posterior to the upper insertion of the pectoralis major or by placing the posterior fin at 24,65º with respect to the upper insertion line.

Upper insertion of the pectoralis major constitutes a reliable reference to reproduce anatomy in hemiarthroplasties for proximal humeral fractures.

The objective of this study is to analyze changes in the force needed to raise the arm caused by using a single or a double-row configuration of cuff repair.

Cadaveric study performed using 5 fresh-frozen shoulders. Supraspinatus tear created in all specimens beginning 0.5 cm from biceps tendon. Repair of tear with single and double-row configuration of anchors placed 1cm apart each one. Sutures fixed to digital dynamometer. Continuous traction applied and registered to elevate humerus to 30° and 45°. Experiment repeated 3 times for each configuration and angle of elevation on each specimen. Paired Student t test was used to compare difference between single and double-row configuration at 30° and 45° of anterior elevation.

Significant differences between force needed to raise the arm to 30° with single-row (4,76 kg) configuration and double-row (6,94) (p< 0,001). Significant differences between force needed to raise the arm to 45° with single-row configuration (10,32 kg) and double-row (15,93) (p< 0,008). Significant differences when comparing mean increase of force needed to raise the arm from 30° to 45° between single and double-row configuration (p< 0,012).

The force needed to raise the arm to 30° and 45° is significantly higher for double than for single-row configuration. Quality of tendon margin should be taken into account when choosing between double and single-row configuration. If repair is done to a frayed and degenerated tendon, surgeon has to imbalance benefits of double-row repair with the fact that tendon suture will have to resist an increased force in active movement.

Purpose of study was to determine the value of the upper edge of the pectoralis major (UPM) insertion as landmark to determine proper height and version of hemiarthroplasties implanted for proximal humeral fractures.

UPM insertion was referenced with metallic device in 20 cadaveric humerus. Computed Tomography study was performed in all specimens. Total humeral length and distance between the UPM insertion and the tangent to humeral head was recorded. CT scan slice showing UPM superimposition in humeral head was drawn to determine prosthesis retroversion. Qualitative variables are presented in absolute and percentage values. Quantitative variables are presented with mean values and standard deviation.

Mean total humeral length 32,13 cm. Mean distance from the UPM to the tangent to the humeral head 5,64. Mean distance from UPM insertion to the tangent to the humeral head represents the 17,55 % of total humeral length. Mean distance of UPM insertion to the posterior fin of the prosthesis of 1,06 cm. Angle between UPM insertion and posterior fin of the prosthesis 24,65°.

Mean distance from the UPM insertion to the top of the humeral head of 5, 6 cm with a 95% confidence interval. Placement of the prosthesis in the proper retroversion can be achieved by placing the posterior fin 1,06 cm posterior to the UPM or by placing the posterior fin at 24,65° with respect to the upper insertion line. UPM constitutes a reliable reference to reproduce anatomy in hemiarthroplasties for proximal humeral fractures.

Introduction: Concern remains in loosening of glenoid component reversed prostheses. This study is to analyze glenoid location of stem and 4 screws of glenoid component.

Material and method: 34 reversed prostheses included. Mean age 74,10, 33 females/1 male. Preoperative CT study : glenoid version; measure of anterior-posterior osteophytes. Postoperative CT study: central stem location and superior, inferior, anterior, posterior screws location. Study of influence of glenoid version and presence of osteophytes in location of glenoid implant.

Results: 27 retroverted glenoids (mean 6,5°); 7 ante-verted (mean 5,3°). 17 cases with anterior osteophyte and 12 of posterior. In 52% the central stem was centered inside glenoid, 33% anterior end was outside glenoid and 14% the posterior end. When central stem was anteriorly outside 85% presented retroverted glenoid (mean 8,33°). When the central stem was posteriorly outside 66% presented anteverted glenoid (mean 9,5°). Inferior screw was fully in place in 38%, ¾ part inside in 19%, 2/4 part in 23%, ¼ part in 19%. Superior screw was fully in place in 47%, ¾ part inside in 23%, 2/4 part in 19%, ¼ part in 9%. Anterior screw was fully in place in 66%, ¾ part in 23% and 2/4 part in 9%. Posterior screw was fully in place in 38%, ¾ part in 42%, 2/4 part in 14%, ¼ part in 4%. The correct positioning of superior screw correlates with less coverture of inferior screw. Anterior and posterior osteophytes did not correlated with stem nor screw positioning.

Conclusions: Positoning of central stem correlates with glenoid version. Anteriorly extruded stems correlate with higher retroverted glenoids and posteriorly extruded stems correlate with higher anteversion.

Positioning the inferior screw fully inside the lateral border of the scapula correlates with lower bony coverture of superior screw.

Introduction: Prostheses radiolucent lines are currently used to evaluate the components fixation. The objective of this study is to determine concordance and reproducibility of humeral stem radiolucent lines evaluation.

Material and method: Five observers evaluated 64 x-ray belonging to 32 pairs (1 antero-posterior view and 1 outlet view) obtained from 16 shoulder prostheses. 16 x-ray pairs were obtained immediately after surgery and 16 one year after surgery. Evaluation in four degrees of radiolucent width for each of the 7 zones that the humeral component was divided for. Evaluation of the component-cement interface and the cement-bone interface. Each observer made two evaluations of the 64 x-ray separated in 6 weeks. Statistics : index kappa with quadratic weighting.

Results: Intra-observer results: mean kappa index for component-cement interface: 0,3274. mean kappa index for cement-bone interface: 0,5269. Inter-observer results: mean kappa index for component-cement interface: 0,1242. mean kappa index for cement-bone interface: 0,2478. Evaluation of 2 pairs of x-ray of the each prostheses taken in a period of 1 year: component-cement interface: mean of 91,67% of plausible results, cement-bone interface: mean of 80,2% of plausible Results:

Conclusions:

- low kappa index of reproducibility (0,3274–0,5269) of humeral component radiolucent lines evaluation for component-cement interface as well as for cement-bone interface.

Introduction: Reversed prostheses implantation requires screwing of the glenoid component with prefixed angles. This study is to determine anatomical angles of scapula that take part in reversed prostheses implantation.

Material and method: Seventy-three 3-dimensional computed tomography of the scapula and 108 scapular dry specimens were analyzed. Mean age of the CT-3D serie was of 52.59 years old (ranging from 16 to 84). There were 46 females and 27 males. The following measures were made on each patient: length of the neck of the inferior glenoid, angle between the glenoid surface and the upper posterior column of the scapula, angle between the major craneo-caudal glenoid axis and the base of the coracoid process and angle between the major craneo-caudal glenoid axis and the upper posterior column of the scapula. Measures were performed in the AP view as well as in the posterior view of the scapula.

Results: The length of the neck of the anterior glenoid was classified into two groups named ‘short-neck’ and ‘long-neck’ for both three-dimensional computed tomography and cadaveric scapulas with statistically significant differences between both groups (p< 0,001 for the three-dimensional computed tomography scapulas and p=0,034 for the cadaveric group). The angle between the glenoid surface and the upper posterior column of the scapula was also classified into two different types: type I (52° ranging from 48° to 57°) and type II (64° ranging from 60° to 70°) with statistically significant differences between both groups (p< 0,001 for the three-dimensional computed tomography scapulas and p< 0,001 for the cadaveric group). The angle between the major craneo-caudal glenoid axis and the center of the base of the coracoid process averaged 18,25° (ranging 13° from to 27°). The angle between the major craneo-caudal glenoid axis and the upper posterior column of the scapula averaged 8° (ranging 5° from to 18°).

Conclusions:

- scapulas can be classified into two groups regarding the angle between the glenoid surface and the upper posterior column of the scapula with significant differences between them.

Introduction: Analysis of location of central peg and the fours screws of the glenoid component in inverted shoulder prostheses.

Materials and methods: 34 inverted prostheses. Mean age 74.10. 33 women, 1 man. Preoperative CT: glenoid version, presence and size of bone spurs. Postoperative CT: location of central peg and 4 screws.

Results: 27 retroverted glenoids (mean 6.5°), 7 anteverted glenoids (mean 5.3°); anterior bone spur in 17 cases, posterior in 12. In 52% of the cases the central peg was inside the glenoid; in 33% the anterior part was outside and in 14% the posterior part. If the anterior part of the central peg was outside, 85% was due to retroverted glenoids (mean 8.33°). If the posterior part was outside, 66% of these were due to anteverted glenoids (mean 9.5°). Lower inside screw in the scapula in 38% of cases, 3/4 inside in 19%, 2/4 in 23% and 1/4 in 19%. Upper screw: 47%, 23% 19% and 9%, respectively. Anterior screw: 66%, 23% and 9%, respectively. Posterior screw: 38%, 42%, 14% and 4%, respectively.

Conclusions:

- Lower screw completely within the lateral part of the scapula with less coverage by upper screw.

Introduction: Study of the influence of anatomical restoration on the outcome of the surgical treatment of proximal humerus fractures treated by sutures and Ender nails.

Materials and methods: 44 fractures. Mean age 64.45. 12 men and 32 women. Mean follow-up 55.83 months (12.83-97). 14 2p fractures, 27 3p and 3 4p. Functional study using the Constant Scale. Quality of life measured with EuroQol-5D. Imaging done one year after surgery: AP X-Ray, full bilateral humerus with external measurement and control CT.

Results: Mean Constant score for series: 78.98. Mean EuroQol-5D rating for the series: 0.7681. Constant scores for total humerus length: Diminished length: difference < 1 cm, 84.71; difference ≥1 cm, 56. Increased length: difference < 1 cm, 79.2; difference ≥ 1 cm, 78.67. Constant score according to distance between head and trochlea: difference +: 77,94; difference −: 82.92. Differences by age groups: < 70 years, 84.12; ≥70 years, 73.5.

Conclusions: No significant involvement of function with differences of less than 2 cm in total humerus length. No significant involvement of function for differences of less than 1 cm in head-trochlea distance. Functional differences by age groups. Best result < 70 years of age.

Objective: Analysis of the influence in shoulder function of restoring total humeral length (THL) in proximal humeral fractures (PHF) treated with hemiarthroplasty and comparing the data with a control group of proximal fractures treated with osteosynthesis.

Material and method: Prospective study involving 56 patients, twenty-nine 2 and 3 part PHF treated with osteosynthesis and twenty-seven 3 and 4 part fractures treated with hemiarthroplasty. Clinical assessment through Constant Score and radiological exam of the THL of both humerus as well as CT scans to analyze position of the tuberosities at 1-year follow-up.

Results: Osteosynthesis group: mean Constant Score of 77.37. In all cases greater tuberosity consolidated in good position. When differences in THL were higher than 2 cm Constant Score values significatively decreased to mean of 67, when ranging from 0 to 2 cm did not differ significatively from mean Constant Score.

Hemiarthroplasty group: mean Constant Score of 55.76. In 5 cases THL was increased (mean 0.87 cm) with a mean Constant Score of 63.5 and among them the greater tuberosity consolidated in place in 3 cases and posteriorly in 2. In 20 cases THL was decreased (mean 1.03 cm) with a mean Constant Score of 54.25 and among them if the difference was minor than 1 cm the greater tuberosity consolidated in place in 3 cases, consolidated posteriorly in 4 and absent in 1 case, and if the difference was greater than 1 cm, the greater tuberosity consolidated in place in 4 cases, consolidated posteriorly in 6 and absent in 2 cases . In 2 cases no differences in THL.

Conclusions: In PHF treated either with osteosynthesis or hemiarthroplasty, the greater tuberosity can be properly reattached if THL differences are less than 2 cm.

Constant Score correlates with greater tuberosity position at any difference of THL less than 2 cm.

Introduction and purpose: The treatment of proximal humerus fractures is still controversial in terms of the surgical approach to be used and even of whether surgery is indeed necessary or not. The purpose of this study is to assess the functional result and the patients’ perception of their general health condition after treatment of displaced humerus fractures by means of transosseous sutures with or without the support of modified Ender nails.

Materials and methods: The study comprised a series of 40 patients (mean age: 66.21 years); 82% females /18% males. The patients had the following fracture types: 27% had two-part fractures, 60% had three-part fractures and 12% had four-part fractures and fracture-dislocations. The mean follow-up was 55.83 months (12.83-97). The final functional evaluation was carried out using the Constant score and the health perception was measured on the EuroQol-5D scale. All patients were submitted to a final radiological exam (AP and profile radiographs on the scapular plane).

Results: The mean value obtained on the Constant Scale was 74.18 in the involved arm and 84.06 in the contralateral one. As regards pain, the mean obtained was 12.57, while the value for forward arm elevation was 8.24. When comparing two age groups (> 70 vis-á-vis < 70 year olds) a significant difference was obtained with respect to Constant Scale’s global value (p 0.022). Furthermore, a significant difference was detected between the result of the EuroQol-5D scale, the global result of the Constant Scale (p 0.061), abduction (p 0.05), internal rotation (p 0.05) and strength (p 0.007). The rate of postop complications was 6% (2 surgical wound haematomas). The final radiological control revealed losses in reduction and necrosis in 9.37% and 3.03% of patients respectively.

Conclusions: (1) Good global functional results on he Constant Scale. (2) Significant differences in functional results based on patients’ age. (3) Difference in quality of life perceptions on the basis of the amount of mobility and strength obtained postoperatively. (4) Low complications rate.

Introduction and purpose: The functional result of the functional repair of the rotator cuff is multifactorial. The purpose of this study was to assess the influence of supraspinatus and infraspinatus fatty degeneration prior to surgery on the functional result of open rotator cuff repair surgeries.

Materials and methods: The study comprised 32 patients (19 females and 13 males) operated on for a rotator cuff tear by means of open surgery. Mean age: 58.16. The right arm was involved in 20 cases, whereas the left one was involved in the remaining 12. The acromion was type II in 28 cases and type III in 4. In all cases a previous MRi was available. The analysis of fatty degeneration was made on the basis of Goutallier’s criteria. The assessment of the functional result was made according to Constant’s score. Minimum follow-up: 1 year.

Results: Mean Constant score: preop 51.41 (range: 30–69); postop (at the end of follow-up) 83 (range: 77–100). Fatty degeneration of the supraspinatus was deg. I in 32.25% of cases and deg. II in 45.16%. As regards the infraespinatus, 38,7% of cases had no fatty degeneration and 41.93% had deg. I. No significant differences were found regarding the post Constant score between patients with deg. 0-I supraspinatus fatty degeneration and patients with 0-I infraspinatus fatty degeneration (p 0.604) or between patients with deg. II-III-IV supraspinatus fatty degeneration and those with deg. 0-I infraspinatus fatty degeneration (p.654).

Conclusions: (1) Surgical repairs of rotator cuff tears lead to a satisfactory final functional result. (2) Considering the size of our sample, there do not seem to exist significant differences with respect to functional result between patients with supraspinatus (degrees 0–4) and patients with infraspinatus fatty degeneration (limited to deg. 0–1).

Introduction and purpose: Several factors (vascular, morphological, biomechanical, etc.) have been associated with the etiopathogeny of the rotator cuff. The purpose of this study is to assess the influence of the acromial coverage index (ACI) on the development of rotator cuff tears.

Materials and methods: A comparative analysis was made of three groups of patients with a total of 62 females and 47 males with a mean age of 49.84 years. Group I included patients operated on for a rotator cuff tear (n=45), group II contained patients with a rotator cuff tear which evolved satisfactorily with rehabilitation treatment (n=36) and group III was made up of a group of control individuals with no pathology (n=38). All patients in groups I and II had a rotator cuff tear detected via either MRI or Arthro-CT. ACI is defined as the perpendicular to the tangent of the glenoid cavity until the outermost part of the acromion and the perpendicular to the tangent of the glenoid cavity which coincides with the diameter of the humeral head.

Results: Group I had a mean ACI of .68, group II of .72 and group III of .59, i.e. there are statistically significant differences between groups I and III (p< 0.0001) and between group II and III (p< 0.0001). No statistically significant differences exist between group I and II (p< 0.219). No statistically significant differences exist between right and left arm involvement (p< 0.471). There are statistically significant differences between males and females (p< 0.0001).

Conclusions: (1) ACI is significantly higher in patients with rotator cuff tears than in the control group. (2) ACI is significantly higher in females than in males. (3) There are no statistically significant differences with respect to the involvement’s laterality. (4) ACI would seem to have an influence on the etiopathogeny of rotator cuff tears.