Wear and osteolysis are major contributors which limit the durability of total hip arthroplasty (THA) and ultimately cause it to fail. Efforts were made to decrease the wear by highly cross-linked polyethylene (HXLPE) and using ceramic bearings. The purpose of this study is to analyze the five year performance of large sized (32mm and 36mm) ceramic and metal heads on X3 HXLPE (Stryker, Mahwah, NJ). From Jan 2006 to June 2008, 81 consecutive patients with minimum 5 year radiographic and clinical followup were identified from out institutional prospective database. 51 non-cemented THA (45 patients) had ceramic on HXLPE (CoX3) group and 30 hips (29 patients) had metal on HXLPE (MoX3) group. Mean age was 36 ± 8 years (36–76) and 50 ± 9 years (51–86) in ceramic and metal group, respectively. Wear rates were measured on an anteroposterior weight-bearing pelvis radiographs using the computer-assisted Roman software.Introduction
Materials and Method
Potential implant and technique related factors to improve patellofemoral (PF) kinematics in total knee arthroplasty (TKA) are design of trochlear geometry and patella, restoration of posterior offset, patellar tilt and avoid overstuffing. The primary aim of this prospective, matched pair study was to assess the radiographic features of PF kinematics with an anatomic patella. Between July 2012 and May 2013, 49 consecutive posterior stabilized cemented Attune TKAs (Depuy Synthes Warsaw Indiana) were matched to the 49 PFC Sigma (Depuy) based on age, gender, and body mass index (BMI). All surgeries were performed via medial parapatellar approach with patellar resurfacing. Radiographic analysis was performed prospectively with minimum 1-year follow-up and included overall limb alignment, anterior offset, posterior offset, joint line, patellar thickness, patellar tilt and patellar displacement by two independent observers.Introduction
Material and Methods
Total hip arthroplasty (THR) with non-cemented or hybrid fixation remains one of the most successful procedures performed today. The aim of this study was to assess the safety and efficacy of a hydroxyapatite (HA) coated, hemispherical cup. Between 2003 and 2007, 223 THAs (210 patients) with peripheral self-locking (PSL) cup and highly cross-linked polyethylene (Crossfire, Stryker, Mahwah, NJ) with minimum 5 years clinical and radiographic follow-up (5–9 years) were analyzed. The mean age was 62.5 years ± 10.8 (range, 32.7 – 86.3) at the time of surgery and the predominant preoperative diagnoses was osteoarthritis (97.8%). 72% were solid cups without screw augmentation and 28% were multi-hole with screw. Clinical analysis included Hospital for Special Surgery (HSS) hip scores at latest follow-up. Detail radiographic analysis was carried out on anteroposterior and false profile views for evidence of osseointegration in all Charnley's zones. Osseointegration was assessed based on presence of Stress Induced Reactive Cancellous Bone (SIRCaB) with trabecular bone hypertrophy 5–15mm extending from the cup, and absence of radiolucency or demarcation. EBRA software was used to assess cup positioning.Introduction
Material and Methods
Non-cemented, porous-coated metaphyseal sleeves have been designed to improve biologic fixation and stability in revision total knee arthroplasty (TKA) with major bone defects. The aim of this study was to evaluate the clinical results and osteointegration of these sleeves in major bone loss. Between 2008 and 2011, 24 revision TKAs with major bone loss were reconstructed with non-cemented, porous-coated proximal sleeve (DePuy, Warsaw, IN). All patients were prospectively followed for a minimum of 2 years. Indications for use of sleeves were major metaphyseal tibial and femoral bone loss, younger age, and higher activity level. Osteointegration around the sleeves were classified as:
Grade 1: Complete osteointegration in all views without any demarcation. Grade 2: Sleeves that are not completely osteointegrated but they are stable. Grade 2A: Demarcation less than 2 mm on any view Grade 2B: Demarcation more than 2 mm on any view
Grade 3: Sleeves that are not osteointegrated and unstable with evidence of subsidence. Grade 3A: Subsidence less than 2 mm on any view Grade 3B: Subsidence more than 2 mm on any viewIntroduction:
Materials and Methods:
The earliest evidence of particle-induced response is found in the synovium, leading to osteolytic defect. The degree of synovitis can be quantified by magnetic resonance imaging (MRI). This is the first long-term, prospective, matched-pair study using MRI to analyze wear-induced synovitis and osteolysis between rotating-platform posterior-stabilized (RP-PS), fixed-bearing metal-back (FB-MB), and all-polyethylene tibial (APT) designs in active patients with identical femoral components and polyethylene. From September 1999 to October 2001, a matched-pair analysis of 24 TKAs (18 patients, 3 groups: 8 RP-PS, 8 FB-MB, and 8 APT) was performed. TKAs were matched for age, sex, body mass index (BMI), and University of California Los Angeles (UCLA) activity scores. All patients underwent MRI using MAVRIC (multi-acquisition variable-resonance image combination) knee protocol designed to reduce metal susceptibility artifact. Images were evaluated for volumetric measure of synovitis and/or osteolysis and presence of fibrous membrane formation at the cement-bone interface.Introduction:
Methods:
Severe bone loss creates a challenge for fixation in femoral revision. The goal of the study was to assess reproducibility of fixation and clinical outcomes of femoral revision with bone loss using a modular, fluted, tapered distally fixing stem. 92 consecutive patients (96 hips) underwent hip revision surgery using the same design of a modular, fluted, tapered titanium stem between 1998 and 2005. Fourteen patients with 16 hips died before a 2-year follow-up. Eighty hips were followed for an average of 11.3 years (range of 8 to 13.5 years). Bone loss was classified as per Paprosky's classification, osseointegration assessed according to a modified system of Engh et al, and Harris Hip Score was used to document pain and function. Serial radiographs were reviewed by an independent observer to assess subsidence, osseointegration and bony reconstitution.Introduction:
Methods:
Proper component orientation and soft tissue balancing are essential for longevity of total knee arthroplasty (TKA), especially in young and active patients. The aim of this study was to evaluate long-term results and quality of TKA in young and active patients with extension first gap balancing technique, in 2 Posterior-Stabilized (PS) total knee designs with identical femoral component. 43 consecutive Rotating-Platform (RP-PS, 33 patients) and 38 Fixed-Bearing (FB-PS, 29 patients) with University of California Los Angeles (UCLA) activity score of 5 or above and mean age was 53 ± 1.5 years were followed prospectively for a minimum of 10 years. 18 random TKAs were analyzed for component rotation using MRI.Introduction:
Material and Methods:
Hard-on-hard bearings and surface replacement (SR) have been used in young and active patients due to the reduced wear and lower rates of osteolysis. However, neither of these options resulted in survivorship higher than 90%–95% in this group of patients. The purpose of this prospective study was to compare minimum 10-year survivorship of non-cemented total hip arthroplasty (THA) using 28 mm metal head against highly-cross linked polyethylene (HXLPE) in our cohort as compared to published reports of other bearings, including surface replacements, in young-active patients. From 1999 to 2003, 91 consecutive patients (112 hips; 57 males and 34 females) with average UCLA score of 8 and mean age 53 years (range 24–65 years), who received metal on HXLP (Crossfire), were included. At minimum 10-years follow-up, patients' clinical data was assessed. All level I, II studies, registry data, and prospective cohorts published in the literature with minimum 10 years of surface replacement (SR) and ceramic on ceramic (CoC) in young patients were included.Introduction:
Matierial and Methods:
Total hip arthroplasty (THR) is one of the most successful procedures performed today. Uncemented acetabular components have by and large replaced cemented cups. As such, optimal fixation, bony ingrowth with longevity, and safety is highly demanded. In this study, we look at the safety and efficacy of the Stryker® Trident PSL™ acetabular component based on radiographic and clinical analysis. We looked at 860 consecutive patients between 2003 and 2007. Of these, 231 consecutive patients had a minimum 5 year follow up. All cases were for degenerative joint disease (DJD), except 2 for dysplasia, 1 for avascular necrosis (AVN), 1 femoral neck nonunion. Average Hospital for Special Surgery (HSS) hip scores at final follow up were recorded. Radiographic analysis included classification based on Delee and Charnley's zones 1–3. Osseointegration was assessed based on presence of Introduction
Materials and Methods
Jumbo cups (58 mm or larger diameter in females and 62 mm or larger diameter in males), theoretically have lowered the percentage of bleeding bone that is required for osseointegration in severe acetabular defects. The purpose of this study was to analyze the safety and efficacy of Tritanium jumbo cups in patients with major acetabular defects (Paprosky type IIIa and IIIb) and assess the extent of osseointegration. From February 2007 and August 2010, 28 consecutive hips (26 patients, mean age of 69 years) underwent acetabular revision arthroplasty for treatment of Paprosky type IIIa and IIIb defects using Tritanium jumbo cups (Stryker, Mahwah, New Jersey).Introduction:
Material and Methods:
Successful total joint arthroplasty requires accruate and reproducible acetabular component position. Acetabular component malposition has been associated with complications inlcuding dislocation, implant loosening, and increased wear. Recent literature had demonstrated that high-volume fellowship trained arthroplasty surgeons are in the “safe zone” for cup inclination and anteversion only 47% of the time. (1) Computer navigation has improved accuracy and reproducibility but remains expensive and cumbersome to many hospital and physicians. Patient specific instrumentation (PSI) has been shown to be effective and efficient in total knee replacements. The purpose of this study was to determine in a cadaveric model the anteversion and inclination accuracy of acetabular guides compared to a pre-operitive plan. 8 fresh-frozen cadaveric pelvis specimens underwent Computer Tomography (CT) in order to create a 3D reconstruction of the acetabulum. Based on these 3D reconstruction, a pre-operative plan was made positioning the patient specific acetabulum guides at 40 degrees of inclination and 20 degrees of anteversion in the pelvis.(Figure 1) The guides were created based on the specific bony morphology of the acetabular notch and rim. The guides were created using a 3D printer which allowed for precise recreation of the virtual model. 7 cadaveric specimens underwent creation and implantation of a acetabular guide specific to each specimens bony morphology. Ligamentum, pulvinar, and labum were removed for each cadaver prior to implantation to prevent soft tissue obstruction. The guides were inserted into the acetabular notch with the final position based on the fit of the guide in the notch. (Figure 2) Post-implantation CT was then performed and inclination and anteversion of the implanted guide measured and compared to the preoperative plan.Introduction:
Methods:
The goal of revision total hip arthroplasty (THA) for acetabular defects is to achieve the best stability and fixation with available host bone. Tritanium is a highly porous metal construct with a titanium matrix coating. We are reporting our experience of utilizing this material in patients with major acetabular defects. Between February 2007 and August 2010, 24 consecutive hips (23 patients) underwent acetabular reconstruction using the Tritanium cups. The acetabular defects were assessed using the Paprosky classification. Anteroposterior and lateral radiographs were analyzed at follow-up based for the presence of radiolucent lines more than 2 mm in any of the 3 zones.Introduction
Methods
Ceramic femoral heads have superior scratch resistant with better wettability and improved wear characteristics compared to metal heads in the laboratory setting. The objective of this study was to compare long-term in vivo wear rates of ceramic and metal femoral heads against conventional polyethylene articulation with cementless stems in young, active patients. Thirty-one matched pair of alumina and metal (Cr-Co) femoral heads against conventional polyethylene in young patients (between 45 and 65 years old) were analyzed for wear and failures for mechanical reasons. The match was based on gender and age at the time of surgery. All procedures were performed between June 1989 and May 1992 by a single surgeon via posterolateral approach, using cementless RB (Ranawat-Bernstein) stems, HG II (Harris-Galante) cups, 4150 conventional polyethylene and 28 mm femoral heads. Hospital for Special Surgery (HSS) hip score was used for clinical analysis. Wear measurements were performed between the initial anteroposterior standing pelvis radiographs, at a minimum of one year after the index procedure to eliminate the effect of bedding-in period, and the latest follow-up. Two independent observers analyzed polyethylene wear rates using the computer-assisted Roman 1.70 software. In revision cases, the wear rates were calculated from radiographs prior to revision surgery. A pair student t test was performed to analyze the statistical difference. Two-tailed ρ values less than 0.05 were considered statistically significant.Introduction
Materials and Methods
