header advert
Results 1 - 3 of 3
Results per page:
Bone & Joint Open
Vol. 1, Issue 6 | Pages 261 - 266
12 Jun 2020
Fahy S Moore J Kelly M Flannery O Kenny P

Aims

Europe has found itself at the epicentre of the COVID-19 pandemic. Naturally, this has placed added strain onto healthcare systems internationally. It was feared that the impact of the COVID-19 pandemic could overrun the Irish healthcare system. As such, the Irish government opted to introduce a national lockdown on the 27 March 2020 in an attempt to stem the flow of admissions to hospitals. Similar lockdowns in the UK and New Zealand have resulted in reduced emergency department presentations and trauma admissions. The aim of this study is to assess the effect of the national lockdown on trauma presentations to a model-3 hospital in Dublin, Ireland.

Methods

A retrospective study was conducted. All emergency department presentations between 27 March 2019 to 27 April 2020 and 27 March 2020 to 27 April 2020 were cross-referenced against the National Integrated Medical Imaging System-Picture Archiving Communication System (NIMIS-PACS) radiology system to identify those with radiologically proven skeletal trauma. These patients were grouped according to sex, age, discharge outcome, mechanism of injury, and injury location.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXXIX | Pages 227 - 227
1 Sep 2012
Conroy E Flannery O McNulty J Thompson J Kelly E
Full Access

Introduction

Antegrade K wiring of the fifth metacarpal for treatment of displaced metacarpal neck fractures is a well recognized surgical procedure. However it is not without complication and injury to the dorsal cutaneous branch of the ulnar nerve has been reported in up to 15% of cases.

Methods

We performed a cadaver study to determine the proximity of this nerve to the K wire insertion point at the base of the fifth metacarpal. K wires were percutaneously inserted under image intensification in sixteen cadaver hands and advanced into the head of the metacarpal. Wires were then cut and bent outside the skin. This was then followed by meticulous dissection of the ulnar nerve from proximal to distal. A number of measurements were taken to identify the distance from the insertion point of the K wire to each branch of this nerve.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_IV | Pages 27 - 27
1 Mar 2012
Flannery O O'Reilly P Britton J Mahony N Prendergast P Kenny P
Full Access

The process of femoral impaction grafting requires vigorous impaction to obtain adequate stability but the force of impaction has not been determined. This process has been reported to result in femoral fractures with rates reaching 16%. The aims of this study were to determine the threshold force required for femoral impaction grafting, to determine the affect cortical thickness, canal diameter and bone mineral density (BMD) have on this threshold force and to measure subsidence of an Exeter prosthesis following impaction at the threshold force.

Adult sow femurs were prepared and placed through a DEXA scanner and the BMD and canal diameter measured. Thirty five femurs were impacted with morsellised bone chips and an increasing force of 0.5kN was applied until the femur fractured. Using callipers the cortical thickness of the bone was measured along the fracture line. Once the threshold force was determined 5 femurs were impacted to this threshold force and an Exeter stem was cemented into the neomedullary canal and a 28mm Exeter head attached. Axial cyclic loading was performed between 440N (swing phase of gait) and 1320N (stance phase of gait) for 150,000 cycles at a frequency of 3Hz. The position sensor of the hydraulic testing machine measured the subsidence.

29 tests were successfully completed. The threshold force was found to be 4kN. There was no significant correlation between the load at fracture and the cortex: canal ratio or the bone mineral density. Following impaction with the maximum force of 4kN the average subsidence for the 5 femurs was 0.276mm (range 0.235 – 0.325mm). In this animal study the threshold force was 4kN. Minimal axial subsidence of the implant occurred when impacting the graft with this threshold force. We therefore achieved a stable construct without fracture which is the ultimate goal for the revision hip surgeon.