We evaluated the outcome of hemiarthroplasty with bone block graft and low profile prosthesis (Aequalis^® fracture prosthesis) for the comminuted proximal humerus fractures. Sixteen low profile prostheses were used since July 2004, and 11 patients were followed-up for average 19.9 (12–30) months. Their mean age was 67.3 (52–78) years. Cemented stem in all cases. Two bone block graft and cancellous chip bone from resected humeral head. Ten cases for Neer type 4 fracture, one case for type 3 fracture. During 6 weeks, abduction brace with neutral rotation position was maintained. Passive and active range of motion exercise started at 6 weeks. Pain and satisfaction visual analog scale (VAS), range of motion, and modified UCLA score for hemiarthroplasty were evaluated at every visit. Radiography was also checked for stem position, loosening, and tuberosity union.

Mean pain VAS was 2.7 (0–5), and mean satisfaction VAS was 8.4 (5–10). Mean active forward flexion was 137o (90–170), external rotation at side was 45.5o (25–70), and internal rotation at back was T10 (T7-L1). Modified UCLA score was 19 (12–30) at final visit. All stems were stable, and there were no loosening at the final follow-up. All tuberosities were united except two tuberosity absorptions. One complication case was infection.

The outcome of hemiarthroplasty with bone block graft and low profile prosthesis was comparable to other implants for comminuted proximal humerus fractures. This system had unique advantages for tuberosity union. Further study with more patients and longer follow-up period are necessary to clarify the effectiveness of this prosthesis.

Aseptic loosening induced by wear debris of polyethylene (PE) is the most common cause of long-term total hip arthroplasty failure. In the previous studies, we reported that the protruding contour and surface morphology of metallic femoral head brought an increase of PE wear. Alumina ceramics is advantageous (neutral shape and smooth surface) for precision machining compared with metal materials, because hardness of ceramics is higher than that of metal materials. In this study, we measured the roundness and the roughness of retrieved alumina ceramic and metallic heads, aiming to evaluate the change of surface morphology of those heads in vivo.

Fourteen retrieved alumina ceramic femoral heads (Kyocera Corp., currently Japan Medical Materials Corp.) were examined: ten femoral heads were made of small grain-size alumina ceramic (SG-alumina; mean grain size is 3.4 um) with a diameter of 28 mm, with clinical use for 16–28 years (mean 22 years) and four femoral head was made of extra-small-grain size alumina ceramic (XSG-alumina; mean grain size is 1.3 um) with a diameter of 26 mm, with clinical use for 14–19 years (mean 16 years). Six retrieved metallic femoral heads with average clinical use for 12–28 years (mean 18 years) were examined: a diameter of from 22 to 32 mm (e.g. Zimmer Inc., Stryker Corp.) The roundness of the retrieved femoral heads was measured by a contour tracer. The surface roughness in the contact area and the non-contact area of the retrieved femoral heads was measured by a surface roughness tester.

Out-of-roundness of SG-alumina and XSG-alumina heads was 0.15 um and 0.19 um, respectively. In contrast, that of metal heads was 2.43 um, and the profiles were in wide distortion compared with both alumina heads. The surface roughness was 0.012 um in the contact area, and 0.009 um in the non-contact area of retrieved SG-alumina heads. The surface roughness in the contact area, 0.007 um, of XSG-alumina was slightly higher than that in the non-contact area, 0.003 um, and the both area of XSG-alumina represent lower value than SG-alumina, with all alumina heads having a reentrant surface profile. In contrast, the surface roughness of metallic heads was in a range of 0.003–0.053 um and several heads showed the protrusion surface profile.

In this retrieval study, the roundness and the roughness of both alumina ceramic femoral heads after long-term clinical use were low and stable compared with metallic heads. And also, the surface roughness increased in the order of XSG-alumina < SG-alumina < metallic head. The alumina ceramic femoral head showed the reentrant surface whereas the metallic head showed the protruding surface. When third-body wear occurs during the clinical use, generally reentrant form may occur on the ceramic surface whereas protrusion form may occur on the metallic surface. We have good clinical results more than 20 years using the SG-alumina, and clinical results for a long term will be expected with XSG-alumina of improved microstructure.

Despite the well-documented improvement in coronal alignment achieved by computer assisted navigation, varying results have been reported for sagittal alignment. Current navigation systems rely on a sagittal femoral mechanical axis identified by the navigation system, but little information is available on the relationship between the sagittal mechanical axis and anatomical axes for intra-operative or postoperative radiographic assessments. We asked whether deviations exist between sagittal femoral mechanical axis and anatomical axes and attempted to identify predictors of the deviations found.

In 100 consecutive patients (200 knees) undergoing TKA, angles between two anatomical axes (the anterior cortical line and mid-medullary line) and two sagittal mechanical axes identified by current navigation systems were measured as proxies of the deviations between them on true lateral radiographs of the whole femur. Correlation analyses and multivariate regression were carried out to identify predictors of deviations.

Significant deviations existed with wide ranges between the anatomical axes and the sagittal mechanical axes. Degree of femoral bowing and femoral length were found to be predictors of deviations between sagittal femoral mechanical axes and anatomical axes.

This study suggests that surgeons applying navigation technology to TKA need to consider deviations between the sagittal femoral mechanical axes and anatomical axes when they intend to place a femoral component at a target sagittal orientation with respect to an anatomical reference.

Recently, it has been reported that the posterior stabilised implant clinically used for the total knee replacement (TKR) may have a risk of failures caused by pressure and stress concentrated on the tibial post. Malalignment of the implant or variable loading applied to the implant are one of the major causes of the failure in posteriori stabilised TKR. The purpose of this study is to biomechanically analyse the effect of implant malalignment on the failure risk of the implant in posteriori stabilised TKR by estimating von-Mises stress on the implant.

Finite element models of a knee joint and a posteriori stabilised implant were developed from 1mm slices of CT images and 3D CAD software, respectively. The posterior stabilised implant consists of a femoral component, a tibial post, and a tibial tray. The finite element models of TKR for the neutral alignment case as well as the different malalignment cases (3° and 5° of valgus and varus angulations, 2° and 4° of anterior and posterior tilts, and 3° of external rotation) were developed. Then, the von-Mises stress, which is which was chosen as the fracture risk parameter, acting on the implant were analysed by using CAE software. Loading condition at the 40% of one whole gait cycle such as 2000N of compressive load, 25N of anterior-posterior load, and 6.5Nm of torque was applied to the TKR models.

The maximum von-Mises stresses were concentrated on the anterior region of the tibial post regardless of the oblique loadings. In the rotationally additional loading (3° of external rotation), excessive stresses occurred in the anterior medial and posterior lateral areas. The maximum stress was 18.3MPa in neutral position. The maximum stress increased by 10% in anterior tilt 2°, 15% in anterior tilt 4°, 25% in posterior tilt 2°, 54% in posterior tilt 4°, 116% in varus 3°, 262% in varus 5°, 318% in valgus 3°, 389% in valgus 5°, 6% in external rotation 3° compared with that in the neutral position case. In addition, 32.0MPa of maximum stress occurred on the posterior lateral area of the base component in rotationally additional loading.

The results showed that the implant malalignment could accelerate the stress concentration on the anterior region of the tibial post as in the result of clinical study. In the case of additional rotation, high stress concentration on the anterior medial and posterior lateral areas as well as on the tibial base surface could generate wear or fracture of tibial post. From the additional rotation case, we can expect that higher conformity implant will generate higher stress concentrations than lower conformity implant even though we did not compare the effect of conformity ratio on the stress concentration in the tibial polyethylene component. This study showed that careful consideration of the implant malalignment would be necessary to improve the clinical outcome in the posteriori stabilised TKR.

We report the case of a 24-year-old man with a congenital meniscoid articular disc of the triangular fibrocartilage complex with extensor carpi ulnaris tenosynovitis. His young age, the normal articular cartilage, the lack of degenerative changes at the margins of the defect and its bilateral occurrence made this diagnosis likely. A congenital defect of the articular disc of the triangular fibrocartilage complex should not be misinterpreted as a traumatic rupture and is usually asymptomatic.

There are few data available regarding the association between hallux valgus and pain or functional limitation. We determined the prevalence of hallux valgus in a rural Korean population aged between 40 and 69 years, and its association with pain and function. A total of 563 subjects was examined using the foot health status questionnaire, the Short Form-36 questionnaire and weight-bearing anteroposterior radiographs.

Hallux valgus was present in 364 subjects (64.7%). It did not significantly correlate with age and was more common in women. Of the 364 subjects, 48 (13.2%) had moderate or greater deformity, defined as a hallux valgus angle > 25°. This was significantly associated with pain, worse function and worse foot health. The putative risk factors associated with painful hallux valgus were female gender, low educational attainment and the presence of pain in the knee.

We present the operative technique and clinical results of concomitant reconstruction of the medial collateral ligament (MCL) and the posterior oblique ligament for medial instability of the knee using autogenous semitendinosus tendon with preservation of the tibial attachment. The semitendinosus tendon graft between the screw on the medial epicondyle and the tibial attachment of the graft was overlapped by the MCL, while the graft between the screw and the insertion of the direct head of the semimembranosus tendon was overlapped by the central arm of the posterior oblique ligament. Assessment was by stress radiograph and the Lysholm knee scoring scale. After a mean follow-up of 52.6 months (25 to 92), the medial joint opening of the knee was within 2 mm in 22 of 24 patients. The mean Lysholm score was 91.9 (80 to 100).

Concomitant reconstruction of the MCL and posterior oblique ligament using autogenous semitendinosus tendon provides a good solution to medial instability.

Between March 2000 and February 2006, we carried out a prospective study of 100 patients with a low-grade isthmic spondylolisthesis (Meyerding grade II or below), who were randomised to receive a single-level and instrumented posterior lumbar interbody fusion with either one or two cages. The minimum follow-up was for two years. At this stage 91 patients were available for review. A total of 47 patients received one cage (group 1) and 44 two cages (group 2). The clinical and radiological outcomes of the two groups were compared.

There were no significant differences between the two groups in terms of post-operative pain, Oswestry Disability Score, clinical results, complication rate, percentage of post-operative slip, anterior fusion rate or posterior fusion rate. On the other hand, the mean operating time was 144 minutes (100 to 240) for patients in group 1 and 167 minutes (110 to 270) for those in group 2 (p = 0.0002). The mean blood loss up to the end of the first post-operative day was 756 ml (510 to 1440) in group 1 and 817 ml (620 to 1730) in group 2 (p < 0.0001).

Our results suggest that an instrumented posterior lumbar interbody fusion performed with either one or two cages in addition to a bone graft around the cage has a low rate of complications and a high fusion rate. The clinical outcomes were good in most cases, regardless of whether one or two cages had been used.

We undertook a retrospective review of 24 arthroscopic procedures in patients with symptomatic ossicles around the malleoli of the ankle. Most of the patients had a history of injury and localised tenderness in the area coinciding with the radiological findings. Contrast-enhanced three-dimensional fast-spoiled gradient-echo MRI was performed and the results compared with the arthroscopic findings. An enhanced signal surrounding soft tissue corresponding to synovial inflammation and impingement was found in 20 patients (83%). The arthroscopic findings correlated well with those of our MRI technique and the sensitivity was estimated to be 91%. At a mean follow-up of 30.5 months (20 to 86) the mean American Orthopaedic Foot and Ankle Society score improved from 74.5 to 93 points (p < 0.001). Overall, the rate of patient satisfaction was 88%.

Our results indicate that symptomatic ossicles of the malleoli respond well to arthroscopic treatment.

This study aimed to evaluate the use of pin leverage in the reduction of Gartland type III supracondylar fractures of the humerus in children. The study comprised 95 children, who were split into three groups according to the type of method of reduction used. Group 1, had an open reduction, group 2, had closed reduction and percutaneous pin fixation and group 3, the pin leverage technique. Each group was analysed according to the time to surgery, the duration of the procedure, the incidence of complications, and the clinical and radiological outcome.

The mean duration of the operative procedure in groups 1, 2 and 3 was 119 minutes (80 to 235), 57 minutes (20 to 110) and 68 minutes (30 to 90), respectively. At a mean follow-up of 30 months (12 to 63) the clinical results were declared excellent or good in all children and the radiological results intermediate in five patients in group 2. The results of the closed reduction using the pin leverage technique was classified as failure in two children.

Our findings lead us to believe that the pin leverage method of reduction gives good results in the treatment of Gartland type III fractures.

Arrest of growth of the distal radius is rare but will produce deformity of the wrist. We corrected angular deformity and shortening of the distal radius by epiphysiolysis and gradual lengthening without a corrective osteotomy.

Patella infera can cause knee pain and lead to patellofemoral osteoarthritis. Treatment is usually unsatisfactory. We describe a case of severe patella infera after operative treatment for fracture of the patella. We used Ilizarov external fixation and gradual lengthening of the patellar tendon. The patellar height was restored and the patient’s symptoms were much improved.

We performed 114 consecutive primary total hip arthroplasties with a cementless expansion acetabular component in 101 patients for advanced osteonecrosis of the femoral head. The mean age of the patients at surgery was 51 years (36 to 62) and the mean length of follow-up was 110 months (84 to 129).

The mean pre-operative Harris hip score of 47 points improved to 93 points at final follow-up. The polyethylene liner was exchanged in two hips during this period and one broken acetabular component was revised. The mean linear wear rate of polyethylene was 0.07 mm/year and peri-acetabular osteolysis was seen in two hips (1.9%). Kaplan-Meier analysis indicated that the survival of the acetabular component without revision was 97.8% (95% confidence interval 0.956 to 1.000) at ten years.

Our study has shown that the results of THA with a cementless expansion acetabular component and an alumina-polyethylene bearing surface are good.

Aims: To evaluate the outcomes of the primary total hip arthroplasties using nonmodular cementless acetabular component with titanium mesh coating þxed by press-þt technique. Methods: Eighty-two primary total hip arthroplasties in 75 patients were performed consecutively. Sixty-two hips were eligible for follow up of average 62 months (range, 48–84). The mean age was 59 years. The clinical evaluation was done by modiþed Harris hip score (HHS) and radiologic evaluation including stability of component, polyethylene wear rate (Dorr method) and remodeling pattern was done. Results: Mean HHS improved from 50.2 points preoperatively to 90.5 points at the last follow up. Excellent or good results were found in 52 hips (84%). All components were stable radiologically. The average thickness of polyethylene was 13.06mm. The linear polyethylene wear rate was 0.073mm/years (range, 0.01–0.23). Wear rate was correlated with the thickness of polyethylene signiþcantly (p=0.049). Any pelvic osteolysis was not found. The polar gap was found in 25 hips (40%) at initial radiographs and has disappeared during follow up in 22 hips (88%). One hip was revised due to chronic unreduced dislocation. There were 9 heterotrophic ossiþcations, 6 nonrecurrent dislocations, and 2 transient sciatic nerve palsies. Conclusion: Total hip arthroplasty using nonmodular cementless acetabular component seemed to enhance satisfactory early mid-term result in terms of stability and acetabular remodeling with minimal wear and pelvic osteolysis.

Aims: To evaluate the early midterm outcomes of primary total hip arthroplasty (THA) using Hydroxyapatite (HA)-coated on smooth surface acetabular component with 28 mm metal head on polyethylene liner articulation. Methods: Seventy primary THA in 63 patients with HA-coated acetabular component were performed consecutively between June 1993 and August 1996. Fifty-four cases were eligible for follow-up of average 71 months (48–104) and the mean age of index operation was 49 years (23–71). The clinical results were analyzed by modiþed Harris hip score, and the radiologic evaluation in terms of stability, polyethylene wear rate (Dorr method), osteolysis around acetabular component was done. Results: Mean Harris hip score improved from 50.9 to 82.2 at the last follow-up. Excellent or good results were found in 38 cases (70%). Eight cases (15%) were unstable radiologically. Pelvic osteolysis was found at 18 cases (33%). The mean polyethylene wear rate was 0.146 mm/year (0.01–0.45). Wear rate of hip dyaplasia was greater than osteonecrosis signiþcantly (p< 0.05). Seven cases (13%) were revised (5 mechanical failures, 2 deep infections). Any bone ongrowth was not found during revision surgery for loose components. Complications included 5 heterotrophic ossiþcations, 2 deep infections, and 1 nonrecurrent dislocation. Conclusion: Primary THA using HA-coated on smooth surface acetabular component showed unsatisfactory clinical results, accelerated polyethylene wear rate accompanying high incidence of osteolysis, and high loosening rate due to lack of bony ongrowth at early midterm.

Introduction: The purpose of this study was to compare the results of the efficacy of two decompressive methods (multiple drilling vs standard core decompression) for the treatment of precollapse osteonecrosis of the femoral head.

Methods: The results in a consecutive series of 54 patients (65 hips) who had undergone multiple drilling (31 patients, 35 hips) or core decompression (23 patients, 30 hips) for the treatment of precollapse osteonecrosis of the femoral head between September 1991 and July 2001 were reviewed. The average duration of follow up was 60.3 months (range, 24–103 months) in the multiple drilling group and 44.8 months (range, 24 to 84 months) in the core decompression group. The presence of collapse and radiographic progression in each group was evaluated prospectively with collapse of the femoral head defined as a failure. Harris hip scores (HHS) were used to evaluate clinical status preoperatively and at the most recent follow up.

Results: Radiographically and clinically, high failure was significantly related to the larger size and laterally located lesion (LHI of less than 12%, Urbaniak IIC, Ohzono IC and Kerboul index of more than 240 degrees) in both groups. The average preoperative and the last HHS was 86.7 to 73.7 in the core decompression group and 87.0 to 74.6 in the multiple drilling group. Compared to the core decompression group, the multiple drilling group had significantly longer times before collapse (mean 42.3 months vs 22.6 months, p=0.011) and a lower rate of collapse within 3 years after operation (55.0% vs 85.7%, p=0.03).

Discussion: Decompressive methods have worse outcomes in case of lesions of larger size and lateral location, even in precollapse stage. Multiple drilling has significantly longer time before collapse and a lower rate of collapse within 3 years after operation than standard core decompression.

According to the knee simulator test results in 1970s, the total decrease in thickness of UHMWPE tibial tray in combination with ceramic femoral component [F-Comp] was less than one tenth as that of the combination with metal [1]. These advantages led to development of total knee prosthesis [TKP] with alumina ceramics. In this study, we report the wear surface observation, the clinical wear and the oxidation of the retrieved TKP used clinically for 23 years, comparing with a metal TKP.

The retrieved TKP was implanted in 1979, and retrieved on January 9th in 2002. This TKP consisted of an alumina ceramic F-Comp and a UHMWPE tray combined with a alumina ceramic tibial component. Observations of the surface of alumina F-Comp and UHMWPE tray were carried out using SEM. Shape of UHMWPE tray was determined three-dimensionally. Comparing the result with original shape based on the product’s plan, liner wear and volumetric wear were calculated. Oxidation index was determined by Fourier transform infrared spectrophotometry.

Alumina F-Comp did not have any scratch on the surface by seeing with naked eye. UHMWPE tray had deformation and scratches obviously. The liner wear rate was 37 micrometer/year and volumetric wear rate was 18.8 mm3/year. The oxidation indexes were 0.6 in the unworn area, 1.2 in the worn area and 0.2 in the inner area.

SEM observations of the F-Comp demonstrated no scratch or pit. In contrast, many scratches were clearly observed on the UHMWPE tray. However, higher magnification observations did not demonstrate severe wear, which was shown on the wear analysis of a metallic F-Comp. Oxidation degradation is a problem to solve. However, the low wear rate and mild wear pattern demonstrate that ceramic F-Comp reduced UHMWPE wear.

Improved cement technique by interposing less than two layers of hydroxyapatite (HA) granules between bone and bone cement at the cementing (Interface Bio-active Bone Cement : IBBC) have been performed in total knee arthroplasty (TKA) since 1987.

We performed IBBC technique in 153 knees (130 patients) in TKA from 1987 to 1993. One hundred and forty knees (120 patients) could be followed up clinically and radiologically. Follow up rate was 91.5%. A mean follow-up period was 9.5 years (6 to 13 years) after surgery. As a control, clinical results of TKA with conventional cementing (Non-IBBC) which were operated in 44 knees (44 patients) in 1986 were used.

In IBBC cases, radiolucent lines on the tibial components were seen 7.1%, 2.9%, 1.4%, 3.6%, 0%, 0% and 0% at Zone ‡T to ‡Z of the anteroposterior view, while in Non-IBBC cases, 40.9%, 13.6%, 9.1%, 27.3%, 11.4%, 4.5% and 13.6% at Zone ‡T to ‡Z, respectively. In IBBC cases peri-prosthetic osteolysis of the tibial components were seen in three knees (2.1%), while 29.5% in Non-IBBC cases. Aseptic loosening of the tibial component was only one case (0.7%) in IBBC cases, while 9.1% in Non-IBBC cases.

In IBBC, bone cement bound to HA mechanically immediately after surgery and HA granules bound to the bone physicochemically after bone ingrowth into the spaces around the HA granules. In Non-IBBC, spaces will appear between bone and bone cement due to osteoporosis and/or atrophy after long years. However, in IBBC, bone and bone cement will contact by interposing HA forever due to osteoconductive effect of HA.

In conclusion, the IBBC has significantly reduced the incidence of radiolucent lines and periprosthetic osteolysis in TKAs. IBBC is a method combining the advantage of cementless HA coating and bone cement.

We have used Interface Bioactive Bone Cement (IBBC) in all cases of total joint arthroplasties since 1987. The method is improved cement technique by interposing less than two layers of hydroxyapatite (HA) granules between bone and the polymethylmethacrylate (PMMA) bone cement. We report one patient who underwent revision surgery after total knee arthroplasty (TKA) using IBBC.

The patient is a woman aged 70 years at the time of revision surgery. Right TKA was performed with the diagnosis of rheumatoid arthritis. An alumina ceramic total knee prosthesis was inserted using IBBC. Pain and walking ability were once improved after the primary TKA. However, the gait disturbance recurred after the patient fell on the ground. Radiographic findings showed severe genu varum, but neither radiolucent lines around the components nor migration of the components were seen. This was revised with semiconstrained prosthesis for the purpose of improving lateral instability at 31 months after the primary TKA.

Avulsion of fibular attachment of collateral ligament was seen at the time of the revision surgery. As PMMA cement was strongly adhered to the bone, it was removed together with cancellous bone. Histologically, HA granules bound to the bone directly after bone ingrowth into the spaces around the HA granules. This is the reason we have described IBBC as a method having the both advantages of cementless HA coating and PMMA bone cement.

After the revision surgery, the walking ability was improved.

In conclusion, this case showed excellent characteristics of IBBC.

Objectives: To assess the early diagnostic procedures and results of treatment for pyogenic discitis and to propose the ideal method of treatment for it.

Materal and Methods: 35 patients underwent open discectomies : 24 males and 11 females. 34 had single level and one had two-level discectomies. Blood were analysed on pre- and postop 3rd, 7th, 14th days, and 6 weeks. MRI exam in 6 patients and bone scintigraphy in 3 were done. Clinical symptoms of infection was observed on the postop 7 day on average. The characteristic features were back pain with muscle spasm, muscle cramping in legs, malaise, mild fever. 32 had conservative treatment and two had anterior radical surgery. Tobramycin, cloxacillin, and clindamycin were used for 4–6 weeks.

Results: WBC, ESR, CRP and body temperatures (BT) at postop 3rd, 7th and 14 days, and 6 weeks were checked; WBC were 11,500, 13,000, 9,300, 6,300 respectively: ESRs at one hour were 39, 50, 46, and 26mm : CRPs were 16.8, 23.5, 8.1 and 2.5. BT on average at postop 3rd, 7th and 14th days were 37.6, 37.4 and 37.2. Muscle spasm subsided together with cramping in legs 7–12 days after chemotherapy, but back pain persisted even after control of infection in most of the cases. MRI disclosed the infection in 5 of 6 cases, while in all 3 bone scans were positive. Infection was controlled in all. In 2 cases bony destruction advanced during chemotherapy, and in 2 other cases after anterior surgery infection exacerbated and spreaded to the neighbouring bone and joints.

Conclusion: Antibiotic therapy is found sufficient in controlling discitis, and surgery should be reserved for the patients without response to antibiotics.