Abstract
1. Introduction
Such a Total Knee Arthroplasty (TKA) that is capable of making high knee flexion has been long awaited for the Asian and Muslim people. Our research group has developed the TKA possible to attain complete deep knee flexion such as seiza sitting. Yet as seiza is peculiar to the Japanese, other strategies will be necessary for our TKA to be on the overseas market. Still it is impractical to prepare many kinds of modifications of our TKA to meet various demands from every country/region. To this end, we contrived a way to modularize the post-cum alignment of our TKA in order to facilitate the following three activities containing high knee flexion: praying for the Muslim, gardening or golfing for the Westerner, sedentary siting on a floor for the Asian. We performed simulation and experiment, such as a mathematical model analysis, FEM analysis and a cadaveric study, thereby determining the optimal combination of moduli for the above activities respectively.
2. Methods
We modularized the post-cum alignment by three parameters in three levels respectively (Fig.1). The shape of the post's sagittal section and the total shape of cum were unchanged. The three parameters for modularization were the post location which was shifted anterior and posterior by 5 mm from the neutral position, the post inclination which was inclined forward and backward by 5° from the vertical, and the radius of curvature of the post's horizontal section which was increased and decreased by 2 mm from the original value. It is crucial to decrease contact stress between the post and cum during praying for the Muslim and during gardening or golfing for the Westerner, which would be realized by choosing the optimal location and inclination of post when kneeling for the Muslim and when squatting for the Westerner respectively (Fig.2). As for the Asian, it is desirable for them to perform various kinds of sedentary sittings on a floor without difficulties, which would be facilitated by choosing the optimal radius of curvature value to increase range of rotation when the knee is in high-flexion (Fig.2). First we performed a mathematical model analysis to introduce the kinetic data during sit-to-stand activities. Then by using the above kinetic data we performed the FEM analysis to determine the contact stress between the post and cum during praying, gardening or golfing. Finally we carried out the cadaveric study to determine the range of rotation at high flexion of the knee.
3. Results and Discussion
The results of FEM analysis demonstrated that the best modular set for the activities for Muslim and Westerners were so that the post location should be shifted by 5 mm and the post inclination should not be applied (Fig.3). The results of cadaveric study demonstrated that the radius of horizontal curvature should be increased by 2mm so as to increase the range of rotation especially when the knee is in high flexion. The subjects for our future study are to verify the validities of the above results through our simulator tests.
