Abstract
Following a careful in-depth preoperative plan for revision TKA, the first surgical step is adequate exposure. It is crucial to plan your exposure for all contingencies. Prior incisions have tremendous implications and care must be taken to consider their impact. Due to the medially based vascular supply to the skin and superficial tissues about the knee, consideration for use of the most LATERAL incision should be made. It is essential to avoid the development of flaps which may compromise the skin and soft tissue which can have profound implications.
Exposure options can be broken down into either PROXIMALLY based techniques or DISTALLY based options. The proximal based techniques involve a medial parapatella arthrotomy followed by the establishment of medial and lateral gutters. An assessment of the ability to evert or subluxate the patella should be made. Care must be taken to protect the insertion of the patella tendon into the tibial tubercle. If the patella is unable to be mobilised, then extension of arthrotomy proximal is performed. If this is not adequate, then consider inside out lateral release. If still unable to mobilise, then a QUAD SNIP is performed. In rare instances, you can connect the lateral release with quad snip resulting in a V-Y quadplasty, which results in excellent exposure.
Another option is to employ DISTALLY based techniques such as the tibial tubercle osteotomy technique described by Whiteside. A roughly 8cm osteotomy segment with distal bevel is performed. The osteotomy must be at least 1.5–2cm thick: too thin and risk of fracture increases. This approach leaves the lateral soft tissues intact and then a “greenstick” of the lateral cortex is performed with eversion of patella and the lateral sleeve of tissue. This technique is excellent for not only exposure but also in instances where tibial cement or a cementless tibial stem needs to be removed. Closure is accomplished with wires either through the canal or around the posterior cortex of the tibia.
