Abstract
Ligament releases are necessary for contemporary non-conforming femoral-tibial articulations.
Most total knee arthroplasty prostheses are designed to be non-conforming at the articulation between the femoral and tibial components. This design is chosen on the arthroplasty principle that “constraint causes loosening” and conforming surfaces have been considered constrained. To provide stability the ligaments are adjusted so that tension in the ligament can provide stability for the total knee replacement.
Ligament releases are NOT necessary for contemporary conforming femoral-tibial articulations.
Through the majority of the range of motion, the normal human knee is not stabilised by ligament tension. Rather, it is the geometrical conformity of the femur and tibia, especially on the medial side, that provides stability. The ligaments are present and ready to restrain the knee from excess varus-valgus or anterior-posterior loads. In a knee design that is congruent, ligaments may be left intact as in the normal knee, ready to provide restraint but not necessarily to provide stability except when excess loads are applied to the knee.
When designing and using the ADVANCE Medial Pivot total knee, the author has left ligaments in the toe-region of the stress-strain curve rather than releasing and tensioning the ligaments. Patient satisfaction survey data at routine follow-up visits for patients at 7–15 years after arthroplasty with this type of reconstruction indicate high satisfaction despite medial and lateral opening (on valgus and varus stress) that would be considered “mid-flexion instability” for non-conforming joints that require careful ligament releases and tensioning.
