Abstract
Introduction
Computer navigation is a highly sophisticated tool in orthopedic surgery for component placement in total hip arthroplasty (THA). A number of recommendations have been published. Although Lewinnek's safe-zone is the best-known among these its significance is questioned in recent years since it addresses the acetabular socket only ignoring the femoral stem. Modern target definitions consider both socket and stem and provide well-defined recommendations for complementary component positioning. We present a new small-sized hand-held imageless navigation system that implies these targets and supports the surgeon in realizing the concept of combined anteversion and combined Target-Zone (cTarget- Zone) in THA and to control leg length and offset without altering the standard surgical work-flow and we report initial results.
Methods
The targets for positioning the components of a total hip as expressed by radiographic cup inclination (cRI) and anteversion (cRA), stem antetorsion (sAT) and neck-to-shaft angle (sNSA) are determined for a specific prosthesis system using a computerized 3D-model. The optimizing goal is maximizing the size of the cSafe-Zone providing the largest target zone for an impingement-free prosthetic range of motion (pROM) in order to minimize the risk for dislocation in physiologic and combined movements. Independent parameters like head size, head-to-neck ration and also component orientations like cRI, cRA, sAT and sNSA were varied systematically and the optimal cSafe-Zone was computed in semi-automated batch runs. These optimized prosthesis-specific results were introduced into the software of the hand-held navigation system. This system measures leg length, offset, acetabular and femoral head centers intraoperatively.
Results
In contrast to Lewinnek the outline of our cSafe-Zone is not rectangular but polygonal. Its size shows prosthesis-specific maxima. The largest zones are found for optimal sNSA values at 126° +/−4°, optimal ranges for cRI depend on head size and range from 44° to 36°, best sAT range from 10° to 18°, cRA from 18° to 25°. There is a prosthesis- specific linear correlation between sAT and cRA that denotes the combined anteversion. The target value for combined anteversion is not dependent on pelvic tilt but on sNSA. The hand-held navigation system displays all these orienting parameters as well as leg-length and offsets. Furthermore, it supports a virtual reduction work-flow thus accelerating surgery. All these information provide important decision-making details for the surgeon intraoperatively in real-time for augmented quality.
Conclusion
The combined Target-Zone provides the basis for patient- and implant-specific control of prosthesis implantation. It includes all important positioning parameters of both total hip components and such gives well-defined individual recommendations for the targets. The new hand-held navigation system (Naviswiss) provides a smart way to direct and control the total hip implantation according to the best combined orientation considering also the concept of combined Safe-Zone. Such it prevents outliers, provides better safety and documents the surgical workflow and the final result of the surgery.
