Abstract
The use of short femoral components in primary total hip arthroplasty (THA) represents an attractive option. Advocates tout bone preservation and ease of use in less invasive surgical approaches. In 2006 we adopted the concept and have had experience with over 5,700 short, tapered, titanium, porous plasma-sprayed stems in patients undergoing primary THA. The plasma-sprayed portion of this stem is similar to the longer, standard length TaperLoc stem, with shortening resulting from a 3 cm reduction in length of the distal portion of the implant. However, the proximal aspect maintains the same flat, tapered wedge proximal geometry as the standard stem. During insertion in some femurs it was noted that distal canal fill occurred preferentially to proximal canal fill. This required distal broaching in order to accommodate a larger stem. In an effort to avoid this clinical situation and to improve the gradual off-loading that is the goal of a tapered geometry, the design was modified in 2011 to reduce the profile of the component. Other modifications include a lower caput-collum-diaphyseal (CCD) angle to enhance horizontal offset restoration without increasing leg length, width sizing from 5–18 mm in 1 mm increments, and polished neck flats to increase range of motion. Undoubtedly, porous plasma sprayed tapered titanium stems are successful in primary THA. Short stems can better accommodate proximal-distal femoral mismatch, particularly in hips with a large metaphysis and a narrow diaphysis, hips with an excessively bowed femur, and hips with severe deformity such as that encountered with developmental dysplasia and post-traumatic arthritis. Short stems violate less femoral bone stock, allowing for more favorable conditions should revision surgery become necessary. The concept of a short stem is appealing to patients, who perceive it as less invasive. In addition, short stems facilitate shorter incision surgery and operative approaches such as the muscle-sparing anterior supine intermuscular. Increased canal fill has been associated with distal cortical hypertrophy. Reducing the distal portion of the stem has reduced the incidence of distal canal fill, and allows for placement of a slightly larger implant.
