PAPER 071: EARLY DISLOCATION RATES IN CERAMIC-ON-CERAMIC TOTAL HIP ARTHROPLASTY

Abstract

Purpose: Dislocation is one of the most common complications following total hip arthroplasty (THA), with rates reported between 1% and 3%, but as high as 6% using a posterior approach with metal on polyethylene bearing surfaces. The purpose of this study was to assess the dislocation rates in ceramic-on-ceramic THAs.

Method: Primary ceramic-on-ceramic (Stryker Orthopaedics) THAs performed at 9 institutions from October 1996 through July 2005 were included in the study (1635 hips in 1485 patients). Sixty-one percent were male. The average age was 52 years (range 15–83). Osteoarthritis was the leading reason for surgical intervention (86%). A posterior approach and 32 mm or 36 mm femoral head was used in the majority of patients (90%). Patients returned for routine clinical examination or were contacted by telephone to assess for dislocations at a minimum of one year (average three years) after surgery.

Results: Of the 1635 ceramic-on-ceramic THAs performed, there were 18 dislocations (1.1%). Of these, 15 were 32 mm femoral heads; 3 were 28 mm; none were 36 mm. The majority of dislocations occurred within 3 months after surgery (72%). Closed reduction was successful in 17 hips with one requiring a revision.

Conclusion: A low rate of dislocations in ceramic-on-ceramic THAs occurred in this study (1.1%). Compared with reported metal-on-polyethylene bearing surfaces, the ceramic-on-ceramic articulation design appears to have fewer dislocations. Other factors associated with this low dislocation rate may be decreased femoral neck diameters and/or larger average femoral head size in patients receiving the ceramic-on-ceramic design. These results will need to be compared with contemporary THA using different articular surfaces.