header advert
Orthopaedic Proceedings Logo

Receive monthly Table of Contents alerts from Orthopaedic Proceedings

Comprehensive article alerts can be set up and managed through your account settings

View my account settings

Visit Orthopaedic Proceedings at:

Loading...

Loading...

Full Access

P35 THE EFFECT OF THE CEMENT THICKNESS ON THE ACETABULAR STRAIN DISTRIBUTION NEAR THE BONE-CEMENT INTERFACE



Abstract

Objective: To examine the effect of varying the thickness of the cement mantle on the strain distribution near the bone-cement interface.

Background: An insufficient cement mantle is thought to generate cement fractures near the bone-cement interface. Debonding at the bone-cement interface may accompany such fractures, and, mechanical failure of the prosthesis may follow. In this study, we aim to analyse the relationship between the cement mantle thickness and the acetabular strain distribution near the bone-cement interface.

Experimental model: Four hemi-pelvic saw bones specimens were implanted with six protected precision strain gauges. All specimens were prepared to receive a 53/28 cemented polyethylene cup (Depuy Charnley Elite).

Methods: We simulated hip joint force relative to the cup during normal walking for quasi-static tests on an Instron 1603 testing machine. The magnitude of the maximum and minimum principal strains, and the orientation of the maximum principal strains were calculated based on the readings of strains from a 32 channel digital acquisition system.

Results: Statistically significant differences in the total strains per gait cycle (p< 0.001) have been noted at all gauge locations. In the principal load bearing quadrants, the recorded tensile strains are reduced by 50% as a result of the thicker mantle, while the transmission of compressive strain is enhanced.

Conclusion: A cement mantle thickness of 5-6mm may preserve the structural integrity of the principal load bearing quadrants of the acetabulum better than a mantle thickness of 2-3mm, by minimising the acetabu-lar strains. This maybe desirable in total hip replacements for conditions such as rheumatoid arthritis and osteoporosis, where the poorer quality bone can be assisted by recruitment of a larger surface area to participate in load bearing.

Keywords: Principal strains; Cement mantle; Mantle thickness; Bone-cement interface; Acetabular strains.

Correspondence should be addressed to Mr Carlos Wigderowitz, Senior Lecturer, University Department of Orthopaedic and Trauma Surgery, Ninewells Hospital and Medical School, Dundee DD1 9SY.