IDEAL TIBIAL INTRAMEDULLARY NAIL INSERTION POINT VARIES WITH TIBIAL ROTATION

Abstract

Purpose: The purpose of this study was to examine how the “ideal” tibial nail insertion point varies with tibial rotation and to determine what radiographic landmarks can be used to identify the most suitable rotational view for insertion of a tibial intramedullary nail.

Methods: Twelve cadaveric lower limb specimens with intact soft tissues around the knee and ankle joints were used. A 2.0mm Kirschner wire was placed in the center of the anatomic safe zone and centered on the tibial shaft. The leg was rotated and imaged using a fluoroscopic C-arm until the K-wire was positioned just medial to the lateral tibial spine (defined as the neutral anteroposterior radiograph). The leg was then fixed and radiographs were taken in 5 degree increments by rotating the fluoroscope internally and externally (in total, a 50 degree arc). Following this a second K-wire was placed in 5 mm increments both medially and laterally and the fluoroscope rotated until this second K-wire was positioned just medial to the lateral tibial spine. Radiographs were digitized for measurements.

Results: Given the presence of a 30 degree rotational arc through which the radiograph appeared anteroposterior, it was possible to improperly translate the start point up to 15 mm. Relative external rotation of the image used for nail placement led to a medial insertion site when using the lateral tibial spine as the landmark. A line drawn at the lateral edge of the tibial plateau to bisect the fibula head correlated with an entry point that was central or up to 5 mm lateral to the ideal entry point. The use of a fibula head bisector line avoided a medial insertion point.

Conclusions: Rotation of the tibia may result in up to 15 mm of translation of the start point that may be unrecognized. Relative external rotation of the film used for nail placement leads to medial insertion sites when using the lateral tibial spine as a landmark. The fibula head bisector line can be used to avoid choosing external rotation views and thus avoid medial insertion points.