PMMA CAUSES PROLONGED HYPERTENSION DURING VERTEBROPLASTY IN SHEEP

Abstract

Introduction and Aims: Polymethylmethacrylate (PMMA) has been widely used in orthopaedic surgery including more recently vertebroplasty. The reported rate of complications following vertebroplasty is low and mainly related to PMMA leakage.

The aim of this study was to elucidate the acute cardiovascular effects of PMMA or bone wax in a vertebroplasty animal model.

Method: Eight skeletally mature sheep were used and PMMA or bone wax were injected unilaterally into L1 and L2 at 10-minute intervals. Arterial, central venous, pulmonary artery and left ventricular pressures were recorded using Statham pressure transducers and Swan Ganz catheters were used for monitoring cardiac output.

Results: Augmentation resulted in a two-phase response regardless of which material was used. First the mean arterial blood pressures started to drop after approximately two seconds. Secondly the pulmonary artery pressure and central venous pressure increased after approximately 11 seconds, whereas cardiac output and left ventricular pressure decreased. There was no significant change in heart rate for both groups. There was a significant difference (p< 0.05) in the pulmonary artery pressure values in the PMMA group compared to the basal values at one, three and five minutes, whereas in the wax group the pulmonary artery pressure recovered within three minutes.

Conclusion: Augmentation resulted in a two-phase cardiovascular response regardless of which material was used. Peak responses were similar for both groups, but pulmonary artery pressure and cardiac output recovered quicker in the wax group. The late recovery of pulmonary artery pressure and cardiac output in the PMMA group may be due to a vasoconstriction effect of the cement monomer.