header advert
Orthopaedic Proceedings Logo

Receive monthly Table of Contents alerts from Orthopaedic Proceedings

Comprehensive article alerts can be set up and managed through your account settings

View my account settings

Visit Orthopaedic Proceedings at:

Loading...

Loading...

Full Access

A SIMPLE METHOD OF DRESSING EXTERNAL FIXATOR PIN SITES



Abstract

Purpose We describe a simple method of dressing pin sites, based on the principles developed in the Ilizarov Institute, that can be easily used in British operating theatres.

Method There are a wide variety of protocols for pin site care but infection rates of up to 80% are reported. The Russian Ilizarov Institute claim low infection rates which may be influenced by their dressing technique. Pin sites are dressed with gauze sponges held against the skin with specifically manufactured rubber stoppers passed over the wires. These provide pressure at the pin site. Plastic syringes consist of a barrel and a plunger with a rubber bung. The rubber bung from a 5ml syringe plunger can be easily removed and slid over the end of a half-pin or both ends of a fine wire. This must be done before the frame is attached and we recommend applying the bungs each time a pin is inserted. At the end of the procedure a cut piece of gauze is applied around the pin site and held in place by the rubber bung, providing a secure non-bulky dressing. A dressing protocol developed by the senior author, based on “The Russian Protocol”, was audited and found to have made a significant impact on the incidence on pin track infection. The bungs can be slid back up the pin when the dressings are changed and left up if the pin site is to remain uncovered. Should the pin site begin to discharge the bung can again be used to hold the dressings securely.

Conclusion We have found this to be a simple, quick, inexpensive and reliable method of pin site dressing that can be readily used in everyday practice, and, reduces the pin track infection incidence.

The abstracts were prepared by Secretary Mr K Trimble.