Abstract
Purpose: Shaft fractures are not uncommon in elderly subjects who have proximal osteosynthesis material. There are several options for the surgical technique and the fixation method, the choice depending on their aggressiveness.
Material and methods: Between January 1998 and January 2002, retrograde nailing with proximal locking using the fixation screws already in the femur was used for eight women aged 79–99 years (mean 92). The classical ascending nailing procedure was used to insert a Russell-Taylor nail in six patients and a supracondylar Stryker nail in two. The proximal locking was used by apposing the fixation screw, which implied coinciding the locking holes in the nail with the plate screws. This required using only one screw for locking in some cases because of the distances between the holes.
Results: There were no infectious complications. Fracture alignment was correct in all cases. Subjectively, total recovery of motion and independence was achieved. Likewise for pain relief although assessment was difficult. Bone healing was achieved in four months. Secondary varus displacement occurred due to insufficient hold of the proximal locking screw in the medial cortical.
Conclusion: Although not perfect, the retrograde nail locked in the proximal implant provides a satisfactory solution for these often debilitated elderly patients. This option enables a minimally aggressive operation allowing a composite osteosynthesis protecting the entire femur without imposing points of peak stress.
The abstracts were prepared by Docteur Jean Barthas. Correspondence should be addressed to him at Secrétariat de la Société S.O.F.C.O.T., 56 rue Boissonade, 75014 Paris.
